Recent Advances in Graphene and Conductive Polymer Composites for Supercapacitor Electrodes: A Review

Chemiresistors Based on Hybrid Nanostructures Obtained from Graphene and Conducting Polymers with Potential Use in Breath Methane Detection Associated with Irritable Bowel Syndrome

This paper describes the process of producing chemiresistors based on hybrid nanostructures obtained from graphene and conducting polymers. The technology of graphene presumed the following: dispersion and support stabilization based on the chemical vapor deposition technique; transfer of the graphene to the substrate by spin-coating of polymethyl methacrylate; and thermal treatment and electrochemical delamination. For the process at T = 950 °C, a better settlement of the grains was noticed, with the formation of layers predominantly characterized by peaks and not by depressions. The technology for obtaining hybrid nanostructures from graphene and conducting polymers was drop-casting, with solutions of Poly(3-hexylthiophene (P3HT) and Poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-bithiophene] (F8T2). In the case of F8T2, compared to P3HT, a 10 times larger dimension of grain size and about 7 times larger distances between the peak clusters were noticed. To generate chemiresistors from graphene-polymer structures, an ink-jet printer was used, and the metallization was made with commercial copper ink for printed electronics, leading to a structure of a resistor with an active surface of about 1 cm2. Experimental calibration curves were plotted for both sensing structures, for a domain of CH4 of up to 1000 ppm concentration in air. A linearity of the curve for the low concentration of CH4 was noticed for the graphene structure with F8T2, presenting a sensitivity of about 6 times higher compared with the graphene structure with P3HT, which makes the sensing structure of graphene with F8T2 more feasible and reliable for the medical application of irritable bowel syndrome evaluation.

Developments in conducting polymer-, metal oxide-, and carbon nanotube-based composite electrode materials for supercapacitors: a review

Supercapacitors are the latest development in the field of energy storage devices (ESDs). A lot of research has been done in the last few decades to increase the performance of supercapacitors. The electrodes of supercapacitors are modified by composite materials based on conducting polymers, metal oxide nanoparticles, metal-organic frameworks, covalent organic frameworks, MXenes, chalcogenides, carbon nanotubes (CNTs), etc. In comparison to rechargeable batteries, supercapacitors have advantages such as quick charging and high power density. This review is focused on the progress in the development of electrode materials for supercapacitors using composite materials based on conducting polymers, graphene, metal oxide nanoparticles/nanofibres, and CNTs. Moreover, we investigated different types of ESDs as well as their electrochemical energy storage mechanisms and kinetic aspects. We have also discussed the classification of different types of SCs; advantages and drawbacks of SCs and other ESDs; and the use of nanofibres, carbon, CNTs, graphene, metal oxide-nanofibres, and conducting polymers as electrode materials for SCs. Furthermore, modifications in the development of different types of SCs such as pseudo-capacitors, hybrid capacitors, and electrical double-layer capacitors are discussed in detail; both electrolyte-based and electrolyte-free supercapacitors are taken into consideration. This review will help in designing and fabricating high-performance supercapacitors with high energy density and power output, which will act as an alternative to Li-ion batteries in the future.

Intrinsically Conducting Polymer Composites as Active Masses in Supercapacitors

Intrinsically conducting polymers ICPs can be combined with further electrochemically active materials into composites for use as active masses in supercapacitor electrodes. Typical examples are inspected with particular attention to the various roles played by the constituents of the composites and to conceivable synergistic effects. Stability of composite electrode materials, as an essential property for practical application, is addressed, taking into account the observed causes and effects of materials degradation.

Hierarchical Activated Carbon-MnO2 Composite for Wide Potential Window Asymmetric Supercapacitor Devices in Organic Electrolyte

The consumption of electrical energy grows alongside the development of global industry. Generating energy storage has become the primary focus of current research, examining supercapacitors with high power density. The primary raw material used in supercapacitor electrodes is activated carbon (AC). To improve the performance of activated carbon, we used manganese dioxide (MnO₂), which has a theoretical capacitance of up to 1370 Fg^-1. The composite-based activated carbon with a different mass of 0-20% MnO₂ was successfully introduced as the positive electrode. The asymmetric cell supercapacitors based on activated carbon as the anode delivered an excellent gravimetric capacitance, energy density, and power density of 84.28 Fg^-1, 14.88 Wh.kg^-1, and 96.68 W.kg^-1, respectively, at 1 M Et₄NBF₄, maintaining 88.88% after 1000 test cycles.

Application of Graphene Nanoplatelets in Supercapacitor Devices: A Review of Recent Developments

As worldwide energy consumption continues to increase, so too does the demand for improved energy storage technologies. Supercapacitors are energy storage devices that are receiving considerable interest due to their appealing features such as high power densities and much longer cycle lives than batteries. As such, supercapacitors fill the gaps between conventional capacitors and batteries, which are characterised by high power density and high energy density, respectively. Carbon nanomaterials, such as graphene nanoplatelets, are being widely explored as supercapacitor electrode materials due to their high surface area, low toxicity, and ability to tune properties for the desired application. In this review, we first briefly introduce the theoretical background and basic working principles of supercapacitors and then discuss the effects of electrode material selection and structure of carbon nanomaterials on the performances of supercapacitors. Finally, we highlight the recent advances of graphene nanoplatelets and how chemical functionalisation can affect and improve their supercapacitor performance.

A Flexible Vertical-Section Wood/MXene Electrode with Excellent Performance Fabricated by Building a Highly Accessible Bonding Interface

Cross-section wood (CW) is generally used as a host for free-standing electrodes, as the abundant opened pores can provide large space for loading guest materials with high electrical conductivity and electrochemical activity. However, there is still a challenge for CW to be used in flexible supercapacitors (SCs) because of its low mechanical strength. Herein, as an alternative to CW, vertical-section wood (VW) with excellent mechanical strength and good flexibility is developed and used as a free-standing and flexible electrode by using Ti₃C₂T_x (MXene) with ultrahigh conductivity and good electrochemical activity as a guest material. In particular, the highly accessible bonding interface for Ti₃C₂T_x is first built by delignification on VW to generate abundant pores for continuously absorbing Ti₃C₂T_x and to expose cellulose with abundant oxygen-containing groups for stable combination with Ti₃C₂T_x. Then, cyclic pressing is used to form negative pressure to pump the Ti₃C₂T_x suspension into VW, combining with a preheating process to trigger layer-by-layer self-assembly of Ti₃C₂T_x nanosheets onto a wood cell wall by evaporating water in the suspension. As a result, the free-standing electrode has a large Ti₃C₂T_x loading mass proportion of 33 wt %, a high conductivity of 3.14 S cm^-1, and good flexibility with much higher mechanical strength of 15.1 MPa than 0.4 MPa of CW. The symmetric SC delivers a good specific capacitance of 805 mF cm^-2 at 0.5 mA cm^-2, a remarkably high rate capability of 84% to 10 mA cm^-2, and an energy density of 13.85 μW h cm^-2 at 87.5 μW cm^-2. Additionally, this SC shows a long lifespan of 90.5% after 10,000th charge and discharge cycles even at a constant bending angle of 90°, suggesting promising potential in flexible devices.

Variable Angle Spectroscopic Ellipsometry Characterization of Graphene Oxide in Methanol Films

It has been widely established that solvents modify the functional groups on the graphene oxide (GO) basal plane and, thus, modify its reactivity. Despite the increasing interest in GO films, a less studied aspect is the influence of methanol on the refractive index of GO films. Herein, the Variable Angle Spectroscopic Ellipsometry (VASE) technique has been used to characterize the optical response of GO in methanol films (0.4 mg/mL) dip-coated on glass substrates. The ellipsometric data have been modeled using a Lorentz oscillator model. We have found that the energy of the oscillator at ~3.9 eV for GO in water shifts to ~4.2 eV for GO in methanol films.

Recent Advances in Functional Polymer Materials for Energy, Water, and Biomedical Applications: A Review

Academic research regarding polymeric materials has been of great interest. Likewise, polymer industries are considered as the most familiar petrochemical industries. Despite the valuable and continuous advancements in various polymeric material technologies over the last century, many varieties and advances related to the field of polymer science and engineering still promise a great potential for exciting new applications. Research, development, and industrial support have been the key factors behind the great progress in the field of polymer applications. This work provides insight into the recent energy applications of polymers, including energy storage and production. The study of polymeric materials in the field of enhanced oil recovery and water treatment technologies will be presented and evaluated. In addition, in this review, we wish to emphasize the great importance of various functional polymers as effective adsorbents of organic pollutants from industrial wastewater. Furthermore, recent advances in biomedical applications are reviewed and discussed.