Synthesis of Thermally Stable h-BN-CNT Hetero-Structures via Microwave Heating of Ethylene under Nickel, Iron, and Silver Catalysts

Hydrogen storage efficiency of Fe doped carbon nanotubes: molecular simulation study

Given that adsorption is widely regarded as a favorable technique for hydrogen storage, it is appropriate to pursue the development of suitable adsorbent materials for industrial storage. This study aimed to assess the potential of Fe-doped carbon nanotubes (FeCNT) as a remarkable material for hydrogen storage. The structures of pure and Fe-doped CNTs were optimized based on quantum mechanical calculations using density functional theory (DFT) with the Perdew-Burke-Ernzerhof (PBE) method. To gain a comprehensive understanding of the adsorption behavior, Monte Carlo simulation was employed to investigate the adsorption of hydrogen molecules on FeCNT. The study specifically examined the impact of temperature, pressure, and hydrogen mole percentage on the adsorption capacity of FeCNT. The findings indicated that the uptake of hydrogen increased as the pressure increased, and when the pressure exceeded 5 MPa, FeCNT reached a state of near saturation. At room temperature and pressures of 1 and 5 MPa, the hydrogen capacities of FeCNT were determined to be 1.53 and 6.92 wt%, respectively. The radial distribution function diagrams confirmed the formation of a one-layer adsorption phase at pressures below 5 MPa. A comparison of the temperature dependence of hydrogen adsorption between FeCNT and pure CNT confirmed the effectiveness of Fe doping in hydrogen storage up to room temperature. FeCNT exhibited a greater reduction in initial hydrogen capacity at temperatures above room temperature. To evaluate the safety of the system, the use of N2 as a dilution agent was investigated by examining the hydrogen uptake of FeCNT from pure and H2/N2 mixtures at 300 K. The results showed that the addition of N2 to the environment had no significant effect on FeCNT hydrogen storage at pressures below 4 MPa. Furthermore, the study of H2 selectivity from the H2/N2 mixture indicated that FeCNT demonstrated a preference for adsorbing H2 over a wide range of bulk mole fractions at pressures of 4 and 5 MPa, suggesting that these pressures could be considered optimal. Under these conditions, Fe doping can offer an efficient and selective adsorption surface for hydrogen storage.

Structural, mechanical, electronic and optical properties of N-decorated single-walled silicon carbide nanotube photocatalyst for hydrogen evolution via water splitting: a DFT study

This work investigates the fundamental photocatalytic properties of nitrogen-doped single-walled silicon carbide nanotubes (N-doped SWSiCNTs) for hydrogen evolution for the first time. Investigations of the structural, mechanical, electronic, and optical properties of the studied systems were carried out using popular density functional theory implemented in quantum ESPRESSO and Yambo codes. Analysis of the structural properties revealed high mechanical stability with the 3.6% and 7.4% N-doped SWSiCNT. The calculated band gap of the N-doped SWSiCNT with 3.6% demonstrated a value of 2.56 eV which is within the photocatalytic range of 2.3 eV-2.8 eV. The hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) potentials of the 3.6% N-doped SWSiCNT also showed good agreement with previous theoretical data. The studied material showed the best photocatalytic performance in both parallel and perpendicular directions by absorbing photons in the visible region. Therefore, the observed structural, mechanical, electronic and optical behaviors demonstrated by the 3.6% N-doped SWSiCNT exposed it as a better photocatalyst for hydrogen production under visible light.

DFT Studies of the Photocatalytic Properties of MoS2-Doped Boron Nitride Nanotubes for Hydrogen Production

This study investigated the photocatalytic properties of MoS2-doped boron nitride nanotubes (BNNTs) for overall water splitting using popular density functional theory (DFT). Calculations of the structural, mechanical, electronic, and optical properties of the investigated systems were performed using both the generalized gradient approximation and the GW quasi-particle correction methods. In our calculations, it was observed that only (10, 10) and (12, 12) single-walled BNNTs (SWBNNTs) turned out to be stable toward MoS2 doping. Electronic property calculations revealed metallic behavior of (10, 10)-MoS2-doped SWBNNTs, while the band gap of (12, 12) SWBNNT was narrowed to 2.5 eV after MoS2 doping, which is within the obtained band gaps for other photocatalysts. Hence, MoS2 influences the conduction band of pure BNNT and improves its photocatalytic properties. The water-splitting photocatalytic behavior is found in (12, 12) MoS2-doped SWBNNT, which showed higher water oxidation (OH-/O2) and reduction (H+/H2) potentials. In addition, optical spectral calculations showed that MoS2-doped SWBNNT had an optical absorption edge of 2.6 eV and a higher absorption in the visible region. All of the studied properties confirmed MoS2-doped SWBNNT as a better candidate for next-generation photocatalysts for hydrogen evolution through the overall water-splitting process.

The potentials of boron-doped (nitrogen deficient) and nitrogen-doped (boron deficient) BNNT photocatalysts for decontamination of pollutants from water bodies

This work investigates the structural, elastic, electronic, and photoabsorption properties of boron- (N-deficient) and nitrogen- (B-deficient) doped single-walled boron nitride nanotube (SWBNNT) for photocatalytic applications for the first time. All calculations of the optimized systems were performed with DFT quantum simulation codes. The results of the structural analysis showed that SWBNNT is stable to both B and N dopants. It was also observed that the photodecomposition activity of the B-doped nanotube improved significantly under the condition of slight compressive stress, while it decreased for the N-doped nanotube. Therefore, N-doped SWBNNT showed poor performance under external pressure. Both B and N-doped systems could narrow the wide band gap of SWBNNT to the photocatalytic region below 3 eV, therefore this material can be used as photocatalysts in water splitting for hydrogen evolution, dye degradation, wastewater treatment, etc. Analysis of the optical properties revealed that B-doped SWBNNT absorbs more photons in the visible range than the N-doped SWBNNT and can therefore be considered as a more efficient photocatalyst. In addition, it was found that all doped nanotubes are anisotropic since the absorption in one direction of nanotube axes is worse than the other.

First-Principle Studies of the Structural, Electronic, and Optical Properties of Double-Walled Carbon Boron Nitride Nanostructures Heterosystem under Various Interwall Distances

Structural, electronic, and optical properties of a new combined system of carbon and boron nitride nanotubes are studied using the DFT first principles as implemented in Quantum ESPRESSO codes. The corrections to the quasi-particle energies were studied via GW hybrid functional implemented in the YAMBO code within the many-body perturbation theory. The studies were performed under different interwall distances of 3.0 nm, 2.5 nm, and 1.5 nm between CNTs and BNNTs. The results showed that the structural properties demonstrated high stability of the double-walled carbon boron nitride nanotube (DWCBNNT) systems under interwall distance (IWD) of 3.00 nm, 2.50 nm, and 1.50 nm. Results also demonstrated an inverse variation between the IWD and the diameter of the DWCBNNT system. In terms of the electronic properties, all three configurations of the DWCBNNTs reveal semiconducting behavior under KS-DFT showing a direct band gap of 3.30 eV, 1.79 eV, and 0.81 eV under IWD of 3.0 nm, 2.5 nm, and 1.5 nm, respectively. Furthermore, the band gap of the DWCBNNT increases with an increase in IWD (decrease in inner tube diameter) and decreases with a decrease in IWD (increase in inner tube diameter). In all three cases, the bands are formed by the molecular orbitals of the armchair CBNNT which are transformed to a series of continuous energy levels; the behaviors of electrons that formed the heterostructure are related to the behavior of electrons in B, C, and N atoms. From the optical properties perspective, the studies were conducted in parallel and perpendicular directions to the nanotubes’ axes. The presence of static dielectric functions in parallel direction at 3.3, 3.4, and 4.5 for nanotubes under 3.0 nm, 2.5 nm, and 1.5 nm demonstrated optical refraction. Refractions were also observed in directions perpendicular to the nanotubes. Furthermore, optical reflections occur when there is a higher absorption. The ability of these CBNNT hybrid systems to refract in all directions revealed the most exciting properties of the armchair CBNNT suitable to be used in magnifying glass materials. The findings further imply that the optical absorption coefficient is inversely related to the diameter of the nanotubes and is directly correlated to the band gap.

Computational Studies of the Excitonic and Optical Properties of Armchair SWCNT and SWBNNT for Optoelectronics Applications

In this study, the optical refractive constants of the (5, 5) SWBNNT and (5, 5) SWCNT systems were calculated in both parallel and perpendicular directions of the tube axis by using Quantum ESPRESSO and YAMBO code. It also extended the optical behaviors of (5, 5) SWCNT and (5, 5) SWBNNT to both perpendicular and parallel directions instead of the parallel directions reported in the literature. It also looked at the effects of the diameter of the nanotube on the optical properties instead of chiral angles. From our results, the best optical reflection was found for (5, 5) SWBNNT, while the best optical refraction was found with (5, 5) SWCNT. It was observed that the SWCNT demonstrates refraction in both parallel and perpendicular directions, while (5, 5) SWBNNT shows perfect absorption in perpendicular direction. These new features that appeared for both nanotubes in perpendicular directions were due to new optical band gaps, which appear in the perpendicular directions to both nanotubes’ axis. The electron energy loss (EEL) spectrum of SWBNNT revealed the prominent π- and π + δ- Plasmon peaks, which demonstrates themselves in the reflectivity spectrum. Furthermore, little effect of diameter was observed for the perpendicular direction to both nanotubes’ axis; as such, the combined properties of (5, 5) SWBNNT and (5, 5) SWCNT materials/systems for transmitting light offer great potential for applications in mobile phone touch screens and mobile network antennas. In addition, the studies of optical properties in the perpendicular axis will help bring ultra-small nanotubes such as SWCNT and SWBNNT to the applications of next-generation nanotechnology.

The Exchange-Correlation Effects on the Electronic Bands of Hybrid Armchair Single-Walled Carbon Boron Nitride Nanostructure

This study investigates the effect of exchange-correlation on the electronic properties of hybridized hetero-structured nanomaterials, called single-walled carbon boron nitride nanotubes (SWCBNNT). A first principles (ab initio) method implemented in Quantum ESPRESSO codes, together with different parametrizations (local density approximation (LDA) formulated by Perdew Zunga (PZ) and the generalized gradient approximation (GGA) proposed by Perdew–Burke–Ernzerhof (PBE) and Perdew–Wang 91 (PW91)), were used in this study. It has been observed that the disappearance of interface states in the band gap was due to the discontinuity of the π–π bonds in some segments of SWCNT, which resulted in the asymmetric distribution in the two segments. This work has successfully created a band gap in SWCBNNT, where the PBE exchange-correlation functional provides a well-agreed band gap value of 1.8713 eV. Effects of orbitals on electronic properties have also been studied elaborately. It has been identified that the Py orbital gives the largest contribution to the electrical properties of our new hybrid SWCBNNT nanostructures. This study may open a new avenue for tailoring bandgap in the hybrid heterostructured nanomaterials towards practical applications with next-generation optoelectronic devices, especially in LED nanoscience and nanotechnology.

Biogenic Synthesis of AgNPs Using Aqueous Bark Extract of Aesculus indica for Antioxidant and Antimicrobial Applications

Nanotechnology has received a lot of attention from the scientific community because of the greater surface-to-volume ratio of nanomaterials, which phenomenally increases their efficacy in practical applications. Among the various synthesis techniques, the biogenic or green synthesis of nanomaterials shows advantages over other techniques such as physical, chemical, etc. This study reports the biogenic synthesis of silver nanoparticles (AgNPs) using aqueous bark extract of Aesculus indica. The as-synthesized NPs were characterized by UV–visible, FT-IR, XRD, and SEM, and then tested for their antioxidant and antimicrobial potency. We have identified phenols, flavonoids, tannins, saponins, and carbohydrates in the bark extract of A. indica. The extract-loaded-AgNPs showed the highest inhibition for Staphylococcus aureus (28.0 mm), Pseudomonas aeruginosa (17.66 mm), Escherichia coli (14.33 mm), Acetobacter serratia (14.00 mm), and Klebsiella pneumoniae (12.33 mm). The methanolic bark extract inhibited S. aureus (24.33 mm), P. aeruginosa (10.66 mm), E. coli (11.33 mm), A. serratia (9.66 mm), and K. pneumoniae (11.66 mm). Aqueous bark extract inhibited S. aureus (22.33 mm), P. aeruginosa (8.33 mm), E. coli (9.33 mm), A. serratiaa (8.33 mm), and K. pneumoniae (9.66 mm). Its aqueous extract showed the highest antioxidant potency; IC50 (0.175 µg/mL) followed by the methanolic extract; IC50 (0.210 µg/mL) and extract-loaded nanoparticles; IC50 (0.901 µg/mL). Our findings provide meaningful interest for antioxidant, anti-microbial applications of, and AgNPs synthesis by, aqueous bark extract of A. indica.

Nano/Micro and Bio-Inspired Materials on Wide-Bandgap-Semiconductor-Based Optoelectronic/Power Devices

This Special Issue on “Nano/Micro and Bio-Inspired Materials on Wide-Bandgap-Semiconductor-Based Optoelectronic/Power Devices” is a collection of 20 original articles dedicated to theoretical and experimental research works providing new insights and practical findings in the field of solid-state technology-related topics [...]