1
|
Microstructure and Superelastic Properties of FeNiCoAlTi Single Crystals with the <100> Orientation under Tension. CRYSTALS 2022. [DOI: 10.3390/cryst12040548] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/04/2022]
Abstract
The microstructure and superelastic response of an Fe41Ni28Co17Al11.5Ti2.5 (at.%) single crystal along the <100> orientation was investigated under tension at room temperature after aging at 600 °C for 24 h. From the superelastic results, the samples aged at 600 °C for 24 h exhibited 4.5% recoverable strain at room temperature. The digital image correlation (DIC) method was used to observe the strain distribution during the 6.5% applied strain loading. The DIC results showed that the strain was uniformly distributed during the loading and unloading cycles. Only one martensite variant was observed from the DIC results. This was related to the aging heat treatment times. The martensite morphology became a single variant with a longer aging time. The thermo-magnetization results indicated that the phase transformation and temperature hysteresis was around 36 °C. Increasing the magnetic field from 0.05 to 7 Tesla, the transformation temperatures increased. The maximum magnetization was 160 emu/g under the magnetic field of 7 Tesla. From the transmission electron microscopy results, the L12 precipitates were around 10 nm in size, and they were high in Ni content and low in Fe content.
Collapse
|
2
|
Magnetic Properties of FeNiCoAlTiNb Shape Memory Alloys. CRYSTALS 2022. [DOI: 10.3390/cryst12010121] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/10/2022]
Abstract
The magnetic properties of the new Fe41Ni28Co17Al11.5(Ti+Nb)2.5 (at. %) shape memory alloy system were studied in this work. The magnetic properties were characterized by thermo-magnetization and a vibrating sample magnetometer (VSM). In iron-based shape memory alloys, aging heat treatment is crucial for obtaining the properties of superelasticity and shape memory. In this study, we focus on the magnetization, martensitic transformation temperatures, and microstructure of this alloy during the aging process at 600 °C. From the X-ray diffraction (XRD) results, the new peak γ’ is presented during the aging process. The intensity of this new peak (γ’) increases with the aging time, while the intensity of the FCC (111) austenite peak decreases with aging time. Transmission electron microscope (TEM) results show that the size of the precipitate increases with increasing the aging times from 24 to 72 h. Thermo-magnetization results show that: (1) phase transformation is observed when the aging time is at least 24 h, (2) the transformation temperature increases with the aging time, (3) transformation temperatures tend to increase while the magnetic field increases from 0.05 to 7 Tesla, and (4) the magnetization saturates after aging time reaches 24 h. Vibrating sample magnetometer (VSM) results show that thermal process was found to significantly affect the magnetic properties of this alloy, especially on saturated magnetic magnetization and magnetic moment reversal behavior.
Collapse
|