Metal–Organic Framework Hybrid Materials and Their Applications

Metal-Organic Framework-Based Fiber Optic Sensor for Chromium(VI) Detection

This study demonstrates a novel fiber optic sensing strategy for selective adsorption and rapid detection of Cr(VI) ions by exploiting a suitable metal-organic framework matrix and the characteristic spectral absorption of Cr(VI) at 395 nm wavelength, respectively. U-bent fiber optic sensor (U-FOS) probes that exhibit remarkably high evanescent wave-based absorbance sensitivity were employed to efficiently detect the Cr(VI) ions that are adsorbed to a stable zeolitic imidazolate framework (ZIF-67) matrix immobilized on the probe surface. A facile technique was developed for the fabrication of ZIF-67-coated U-FOS probes (FOS/ZIF-67) involving an in situ deposition process followed by heat treatment. Selectivity of the FOS/ZIF-67 probes to Cr(VI) was confirmed by optical absorption spectral investigations with 14 other heavy metals and interfering ions. The sensor performance was evaluated with a compact light-emitting diode-photodetector-based setup. FOS/ZIF-67 probes demonstrate an ability to detect Cr(VI) ions with a limit of detection of 1 ppb and a wide linear dynamic range from 0.005 to 100 ppm within a short response time of 5 to 10 min. These sensors show good recovery rates with real water samples and a shelf-life of at least 4 weeks under ambient conditions, thereby demonstrating their viability for real-world application.

Graphene-Based Metal-Organic Framework Hybrids for Applications in Catalysis, Environmental, and Energy Technologies

Current energy and environmental challenges demand the development and design of multifunctional porous materials with tunable properties for catalysis, water purification, and energy conversion and storage. Because of their amenability to de novo reticular chemistry, metal-organic frameworks (MOFs) have become key materials in this area. However, their usefulness is often limited by low chemical stability, conductivity and inappropriate pore sizes. Conductive two-dimensional (2D) materials with robust structural skeletons and/or functionalized surfaces can form stabilizing interactions with MOF components, enabling the fabrication of MOF nanocomposites with tunable pore characteristics. Graphene and its functional derivatives are the largest class of 2D materials and possess remarkable compositional versatility, structural diversity, and controllable surface chemistry. Here, we critically review current knowledge concerning the growth, structure, and properties of graphene derivatives, MOFs, and their graphene@MOF composites as well as the associated structure-property-performance relationships. Synthetic strategies for preparing graphene@MOF composites and tuning their properties are also comprehensively reviewed together with their applications in gas storage/separation, water purification, catalysis (organo-, electro-, and photocatalysis), and electrochemical energy storage and conversion. Current challenges in the development of graphene@MOF hybrids and their practical applications are addressed, revealing areas for future investigation. We hope that this review will inspire further exploration of new graphene@MOF hybrids for energy, electronic, biomedical, and photocatalysis applications as well as studies on previously unreported properties of known hybrids to reveal potential "diamonds in the rough".

A Top-Down Approach and Thermal Characterization of Luminescent Hybrid BPA.DA-MMA@Ln2L3 Materials Based on Lanthanide(III) 1H-Pyrazole-3,5-Dicarboxylates

In this study, novel hybrid materials exhibiting luminescent properties were prepared and characterized. A top-down approach obtained a series of polymeric materials with incorporated different amounts (0.1; 0.2; 0.5; 1, and 2 wt.%) of dopants, i.e., europium(III) and terbium(III) 1H-pyrazole-3,5-dicarboxylates, as luminescent sources. Methyl methacrylate and bisphenol A diacrylate monomers were applied for matrix formation. The resulting materials were characterized using Fourier transform infrared spectroscopy (FTIR) and thermal analysis methods (TG-DTG-DSC, TG-FTIR) in air and nitrogen atmosphere, as well as by luminescence spectroscopy. The homogeneity of the resulting materials was investigated by means of optical microscopy. All obtained materials exhibited good thermal stability in both oxidizing and inert atmospheres. The addition of lanthanide(III) complexes slightly changed the thermal decomposition pathways. The main volatile products of materials pyrolysis are carbon oxides, water, methyl methacrylic acid and its derivatives, bisphenol A, 4-propylphenol, and methane. The luminescence properties of the lanthanide complexes and the prepared hybrid materials were investigated in detail.

Incorporated Metal–Organic Framework Hybrid Materials for Gas Separation, Catalysis and Wastewater Treatment

The special features of metal–organic frameworks (MOFs), namely, tunable porosity, exceptional structure, high surface area and high adsorption capability enable them to be widely studied in many applications including carbon capture and storage (CCS), biomedical engineering, catalysis and pollutant treatment. Despite these remarkable properties, MOFs are known to be moisture-sensitive, hardly recyclable and expensive in fabrication cost which limits their breakthrough performance in more efficient uses. Recently, extensive studies have been devoted to counter those shortcomings by embedding MOFs with support materials using various series of synthetic designs to yield incorporated MOF hybrid materials to counter their limitations. In view of this interest, this review summarizes the latest developments of incorporated MOFs with various materials, namely, ionic liquids (ILs), membranes and metal species. Pre-synthetic and post-synthetic synthesis methods are also discussed. This review also aims to highlight the factors associated with incorporated MOF performance such as materials selection and mass ratio which could have favorable effects in gas separation, catalysis and wastewater treatment applications. The data indicate that incorporated MOF hybrid materials exhibit exceptional properties including excellent robustness and stability. Correspondingly, in comparison to pristine MOFs, incorporated MOF hybrid materials significantly improve, among others, the gas selectivity, catalyst activity and dye removal efficiency in gas separation, catalysis and wastewater treatment, respectively. In addition, the challenge related to the utilization of this newly incorporated material is mentioned.

Materials for Chemical Sensing: A Comprehensive Review on the Recent Advances and Outlook Using Ionic Liquids, Metal–Organic Frameworks (MOFs), and MOF-Based Composites

The ability to measure and monitor the concentration of specific chemical and/or gaseous species (i.e., “analytes”) is the main requirement in many fields, including industrial processes, medical applications, and workplace safety management. As a consequence, several kinds of sensors have been developed in the modern era according to some practical guidelines that regard the characteristics of the active (sensing) materials on which the sensor devices are based. These characteristics include the cost-effectiveness of the materials’ manufacturing, the sensitivity to analytes, the material stability, and the possibility of exploiting them for low-cost and portable devices. Consequently, many gas sensors employ well-defined transduction methods, the most popular being the oxidation (or reduction) of the analyte in an electrochemical reactor, optical techniques, and chemiresistive responses to gas adsorption. In recent years, many of the efforts devoted to improving these methods have been directed towards the use of certain classes of specific materials. In particular, ionic liquids have been employed as electrolytes of exceptional properties for the preparation of amperometric gas sensors, while metal–organic frameworks (MOFs) are used as highly porous and reactive materials which can be employed, in pure form or as a component of MOF-based functional composites, as active materials of chemiresistive or optical sensors. Here, we report on the most recent developments relative to the use of these classes of materials in chemical sensing. We discuss the main features of these materials and the reasons why they are considered interesting in the field of chemical sensors. Subsequently, we review some of the technological and scientific results published in the span of the last six years that we consider among the most interesting and useful ones for expanding the awareness on future trends in chemical sensing. Finally, we discuss the prospects for the use of these materials and the factors involved in their possible use for new generations of sensor devices.

Ab Initio Study of Hydrostable Metal-Organic Frameworks for Postsynthetic Modification and Tuning toward Practical Applications

Metal-organic frameworks (MOFs), a subclass of nanoporous coordination polymers, have emerged as one of the most promising next-generation materials. The postsynthetic modification method, a strategy that provides tunability and control of these materials, plays an important role in enhancing its properties and functionalities. However, knowing adjustments which leads to a desired structure-function a priori remains a challenge. In this comprehensive study, the intermolecular interactions between 21 industrially important gases and a hydrostable STAM-17-OEt MOF were investigated using density functional theory. Substitutions on its 5-ethoxy isophthalate linker included two classes of chemical groups, electron-donating (-NH₂, -OH, and -CH₃) and electron-withdrawing (-CN, -COOH, and -F), as well as the effect of mono-, di-, and tri-substitutions. This resulted in 651 unique MOF-gas complexes. The adsorption energies at the ground state and room temperature, bond lengths, adsorption geometry, natural bond orbital analysis of the electric structure, HOMO-LUMO interactions, and the predicted zwitterionic properties are presented and discussed. This study provides a viable strategy for the functionalization, which leads to the strongest affinity for each gas, an insight into the role of different chemical groups in adsorbing various gas molecules, and identifies synthetic routes for moderating the gas adsorption capacity and reducing water adsorption. Recommendations for various applications are discussed. A custom Python script to assess and visualize the hypothetical separation of two equal gas mixtures of interest is provided. The methodology presented here provides new opportunities to expand the chemical space and physical properties of STAM-17-OEt and advances the development of other hydrostable MOFs.

Emerging MXene@Metal-Organic Framework Hybrids: Design Strategies toward Versatile Applications

Rapid progress on developing smart materials and design of hybrids is motivated by pressing challenges associated with energy crisis and environmental remediation. While emergence of versatile classes of nanomaterials has been fascinating, the real excitement lies in the design of hybrid materials with tunable properties. Metal-organic frameworks (MOFs) are the key materials for gas sorption and electrochemical applications, but their sustainability is challenged by limited chemical stability, poor electrical conductivity, and intricate, inaccessible pores. Despite tremendous efforts towards improving the stability of MOF materials, little progress has made researchers inclined toward developing hybrid materials. MXenes, a family of two-dimensional transition-metal carbides, nitrides and carbonitrides, are known for their compositional versatility and formation of a range of structures with rich surface chemistry. Hybridization of MOFs with functional layered MXene materials may be beneficial if the host structure provides appropriate interactions for stabilizing and improving the desired properties. Recent efforts have focused on integrating Ti₃C₂T_x and V₂CT_x MXenes with MOFs to result in hybrid materials with augmented electrochemical and physicochemical properties, widening the scope for emerging applications. This review discusses the potential design strategies of MXene@MOF hybrids, attributes of tunable properties in the resulting hybrids, and their applications in water treatment, sensing, electrochemical energy storage, smart textiles, and electrocatalysis. Comprehensive discussions on the recent efforts on rapidly evolving MXene@MOF materials for various applications and potential future directions are highlighted.

Assessment of Crystalline Materials for Solid State Lighting Applications: Beyond the Rare Earth Elements

In everyday life, we are continually exposed to different lighting systems, from the home interior to car lights and from public lighting to displays. The basic emission principles on which they are based range from the old incandescent lamps to the well-established compact fluorescent lamps (CFL) and to the more modern Light Emitting Diode (LEDs) that are dominating the actual market and also promise greater development in the coming years. In the LED technology, the key point is the electroluminescence material, but the fundamental role of proper phosphors is sometimes underestimated even when it is essential for an ideal color rendering. In this review, we analyze the main solid-state techniques for lighting applications, paying attention to the fundamental properties of phosphors to be successfully applied. Currently, the most widely used materials are based on rare-earth elements (REEs) whereas Ce:YAG represents the benchmark for white LEDs. However, there are several drawbacks to the REEs’ supply chain and several concerns from an environmental point of view. We analyze these critical issues and review alternative materials that can overcome their use. New compounds with reduced or totally REE free, quantum dots, metal–organic framework, and organic phosphors will be examined with reference to the current state-of-the-art.

Structure assembly regularities in vapour-deposited gold-fullerene mixture films

Self-assembly is an attractive phenomenon that, with proper handling, can enable the production of sophisticated hybrid nanostructures with sub-nm-scale precision. The importance of this phenomenon is particularly notable in the fabrication of metal-organic nanomaterials as promising substances for spintronic devices. The exploitation of self-assembly in nanofabrication requires a comprehension of atomic processes creating hybrid nanostructures. Here, we focus on the self-assembly processes in the vapour-deposited Au _x C₆₀ mixture films, revealing the exciting quantum plasmon effects. Through a systematic characterization of the Au _x C₆₀ films carried out using structure-sensitive techniques, we have established correlations between the film nanostructure and the Au concentration, x. The analysis of these correlations designates the Au intercalation into the C₆₀ lattice and the Au clustering as the basic processes of the nanostructure self-assembly in the mixture films, the efficiency of which strongly depends on x. The evaluation of this dependence for the Au _x C₆₀ composite nanostructures formed in a certain composition interval allows us to control the size of the Au clusters and the intercluster spacing by adjusting the Au concentration only. This study represents the self-assembled Au _x C₆₀ mixtures as quantum materials with electronic functions tuneable by the Au concentration in the depositing mixture.

Metal–Organic Framework Thin Films: Fabrication, Modification, and Patterning

Metal–organic frameworks (MOFs) have been of great interest for their outstanding properties, such as large surface area, low density, tunable pore size and functionality, excellent structural flexibility, and good chemical stability. A significant advancement in the preparation of MOF thin films according to the needs of a variety of applications has been achieved in the past decades. Yet there is still high demand in advancing the understanding of the processes to realize more scalable, controllable, and greener synthesis. This review provides a summary of the current progress on the manufacturing of MOF thin films, including the various thin-film deposition processes, the approaches to modify the MOF structure and pore functionality, and the means to prepare patterned MOF thin films. The suitability of different synthesis techniques under various processing environments is analyzed. Finally, we discuss opportunities for future development in the manufacturing of MOF thin films.

Synthesis, Single Crystal X-Ray Structure, Theoretical Studies of Triple-{MnIII-Schiff-Base}-Decorated Molybdate

The design and synthesis of magnets with low dimensionality is currently an attractive research topic. The reaction of a Schiff base metal complex with simple molybdate has led to the formation of a new {MnIII-Schiff-base}-decorated molybdate heterometallic cluster, [{Mn(salpn)(H2O)}3MoO4](CH3COO)·2H2O (1) (salpn = N,N’-(1,3-propylene)bis(salicylideneiminate)). The hybrid aggregate was characterized using a range of methods including elemental analysis, single crystal x-ray diffraction, Infrared spectra (IR) spectroscopy, and x-ray structural analysis. The crystals of 1 are hexagonal: P63/m, a = 14.027(5) Å, c = 17.487(5) Å, V = 1142.6(3) Å3. Structural analyses indicate that we report on the preparation of the first triple metallic-oligomer held by orthomolybdate. Density functional theoretical calculation (DFT) studies have been performed to calculate electronic structure and potential energy landscapes. Additionally, the magnetic property of 1 indicates an antiferromagnetic coupling between the metal centers in the complex.

Preparation and evaluation of ZnO nanoparticles by thermal decomposition of MOF-5

In recent years, the use of zinc oxide nanoparticles (ZnO NPs) has attracted considerable attention due to its unique properties. In this study, ZnO nanoparticles were synthesized by a simple and repeatable method with thermal decomposition of a zinc-based metal organic framework (Zn-MOF). MOF-5 was prepared by solution (at room temperature) and solvothermal (at 90 °C) methods in dimethylformamide (DMF) as a solvent via the self-assembly of zinc acetate and dehydrate benzene-1,4-dicarboxylate (BDC) as metal ion center and organic bridging ligand respectively without and with tri-ethylamine (TEA) as capping agent. The result products were characterized by Fourier transform infrared (FTIR) for investigation functional groups, X-ray diffraction (XRD) for determination of crystalline structure, scanning electron microscope (SEM) for evaluation of size and morphology, energy-dispersive X-ray spectroscopy (EDS) for determination of chemical composition, and diffuse reflection spectroscopy (DRS) for investigation of Ultraviolet (UV) protective properties. The antibacterial activities of ZnO NPs were studied against Escherichia coli (E. coli).

Structural Transformations in the Thermal Dehydration of [Cu2(bpa)(btec)(H2O)4]n Coordination Polymer

Reactions between pyridinic ligands such as 1,2-bis(4-pyridyl)ethane (bpa) and transition metal cations are a very widespread technique to produce extended coordination polymers such as Metal-Organic Frameworks. In combination with a second ligand these systems could present different topologies and behaviors. In this context, the use of 1,2,4,5-benzenetetracarboxylic acid (H₄btec) gave us a novel 2D compound, [Cu₂(bpa)(btec)(H₂O)₄]_n (1), which was prepared by microwave-assisted synthesis and structurally characterized by means of single crystal X-ray diffraction. Its thermal behavior was analyzed through thermogravimetric analysis and variable temperature powder X-ray diffraction, concluding that thermal stability is influenced by the coordination water molecules, allowing two sequential thermochromic phase transformations to take place. These transformations were monitored by electronic paramagnetic resonance spectroscopy and magnetic susceptibility measurements. In addition, the crystal structure of the anhydrous compound [Cu₂(bpa)(btec)]_n (1.ah) was determined. Finally, a topological study was carried out for the bpa ligand considering all the structures deposited in the Cambridge Structural Databased. More than 1000 structures were analyzed and classified into 17 different topologies, according to the role of the ligand.

On the preferences of five-membered chelate rings in coordination chemistry: insights from the Cambridge Structural Database and theoretical calculations

The purpose of this review is to give an overview of three important N-bidentate ligands: 1,10-phenanthroline (phen), 2,2'-bipyridine (bpy), and ethylenediamine (en). We have not attempted to be comprehensive because of the huge amount of activity being done in coordination chemistry using these ligands. Instead we present a full structural and geometrical study by using the Cambridge Structural Database (CSD) combined with theoretical calculations that allow us to parameterize their coordinating properties and ability to coordinate to transition and non-transition metals. More importantly, we illustrate that upon coordination and formation of the five-membered chelate ring, these ligands are able to adapt themselves to the requirements of the different metals by changing the MN distances and NMN angles. Therefore, a redefinition of the preferences of these ligands to metals with large ionic radii is needed. Finally, we will present some facts about the participation of these ligands in inorganic-organic hybrids (IOHs) based on Keggin polyoxometalates (POMs).