Optical Characteristics of ZnCuInS/ZnS (Core/Shell) Nanocrystal Flexible Films Under X-Ray Excitation

Structured Scintillators for Efficient Radiation Detection

Scintillators, which can convert high-energy ionizing radiation into visible light, have been serving as the core component in radiation detectors for more than a century of history. To address the increasing application demands along with the concern on nuclear security, various strategies have been proposed to develop a next-generation scintillator with a high performance in past decades, among which the novel approach via structure control has received great interest recently due to its high feasibility and efficiency. Herein, the concept of "structure engineering" is proposed for the exploration of this type of scintillators. Via internal or external structure design with size ranging from micro size to macro size, this promising strategy cannot only improve scintillator performance, typically radiation stopping power and light yield, but also extend its functionality for specific applications such as radiation imaging and therapy, opening up a new range of material candidates. The research and development of various types of structured scintillators are reviewed. The current state-of-the-art progresses on structure design, fabrication techniques, and the corresponding applications are discussed. Furthermore, an outlook focusing on the current challenges and future development is proposed.

Perovskite versus ZnCuInS/ZnS Luminescent Nanoparticles in Wavelength-Shifting Layers for Sensor Applications

In this work, the application of quantum dots is evaluated in order to sensitize the commercially popular Si detectors in the UV range. The wavelength-shifting properties of two types of all-inorganic halide perovskite quantum dots as well as ZnCuInS/ZnS quantum dots are determined in order to assess their potential in the effective enhancement of the sensors’ detection range. In a further part of the study, the wavelength-shifting layers are formed by embedding the quantum dots in two kinds of polymers: PMMA or Cyclic Olefin Polymer. The performance of the layers is evaluated by transmission and PLE measurement. Incorporating the nanoparticles seemingly increases the transmittance in the UV range by several percent. The observed phenomenon is proportional to the quantum dots to polymer concentration, which indicates the successful conversion action of the luminescent agents.

On the Optical Response of Tellurium Activated Zinc Selenide ZnSe:Te Single Crystal

In this study, the light output of a zinc selenide activated with tellurium (ZnSe: Te) single crystal was measured for X-ray radiography applications. A cubic crystal (10 × 10 × 10 mm) was irradiated using X-rays with tube voltages from 50 to 130 kV. The resulting energy absorption efficiency, detective quantum efficiency, and absolute luminescence efficiency were compared to published data for equally sized GSO: Ce (gadolinium orthosilicate) and BGO (bismuth germanium oxide) crystals. The emitted light was examined to estimate the spectral compatibility with widely used optical sensors. Energy absorption efficiency and detective quantum efficiency of ZnSe: Te and BGO were found to be similar, within the X-ray energies in question. Light output of all three crystals showed a tendency to increase with increasing X-ray tube voltage, but ZnSe: Te stood at least 2 EU higher than the others. ZnSe: Te can be coupled effectively with certain complementary metal–oxide–semiconductors (CMOS), photocathodes, and charge-coupled-devices (CCD), as the effective luminescence efficiency results assert. These properties render the material suitable for various imaging applications, dual-energy arrays included.

Luminescence Efficiency of Cadmium Tungstate (CdWO4) Single Crystal for Medical Imaging Applications

Background: In this study, the light output of a cadmium tungstate (CdWO4) single crystal was measured under various X-ray radiographic energies. Methods: A CdWO4 single crystal (10 × 10 × 10 mm3) was exposed to X-rays in the 50–130 kVp range. Measurements were evaluated against published data for single crystals of equal dimensions (CaF2:Eu and Lu3Al5O12:Ce). Since the crystal was examined for application in medical imaging detectors, the emitted optical spectrum was classified with respect to the spectral compatibility of numerous commercial optical sensors. Results: The luminescence efficiency (LE) was found to constantly increase with X-ray energy and was higher than that of CaF2:Eu for energies above 90 kVp. However, the efficiency of the previously published Lu3Al5O12:Ce was found to be constantly higher than that of CdWO4. The light emitted from CdWO4 can be optimally detected by certain charge-coupled devices (CCDs), amorphous silicon photodiodes, and photocathodes. Conclusions: The high density (7.9 g/cm3) of CdWO4 and the luminescence signal of this material make it suitable for medical imaging (such as dual energy), high-energy physics or for applications of scintillators in harsh environments.

Dual Energy X-ray Methods for the Characterization, Quantification and Imaging of Calcification Minerals and Masses in Breast

Dual energy (DE) technique has been used by numerous studies in order to detect breast cancer in early stages. Although mammography is the gold standard, the dual energy technique offers the advantage of the suppression of the contrast between adipose and glandular tissues and reveals pathogenesis that is not present in conventional mammography. Both dual energy subtraction and dual energy contrast enhanced techniques were used in order to study the potential of dual energy technique to assist in detection or/and visualization of calcification minerals, masses and lesions obscured by overlapping tissue. This article reviews recent developments in this field, regarding: i) simulation studies carried out for the optimizations of the dual energy technique used in order to characterize and quantify calcification minerals or/and visualize suspected findings, and ii) the subsequent experimental verifications, and finally, the adaptation of the dual energy technique in clinical practice.