Tunable and Polarization-Independent Plasmon-Induced Transparency in a Fourfold Symmetric Metal-Graphene Terahertz Metamaterial

Flexible and transparent metadevices for terahertz, microwave, and infrared multispectral stealth based on modularization design

Multispectral stealth technology including terahertz (THz) band will play an increasingly important role in modern military and civil applications. Here, based on the concept of modularization design, two kinds of flexible and transparent metadevices were fabricated for multispectral stealth, covering the visible, infrared (IR), THz, and microwave bands. First, three basic functional blocks for IR, THz, and microwave stealth are designed and fabricated by using flexible and transparent films. And then, via modular assembling, that is, by adding or removing some stealth functional blocks or constituent layers, two multispectral stealth metadevices are readily achieved. Metadevice 1 exhibits THz-microwave dual-band broadband absorption, with average measured absorptivity of 85% in 0.3-1.2 THz and higher than 90% in 9.1-25.1 GHz, suitable for THz-microwave bi-stealth. Metadevice 2 is for IR and microwave bi-stealth, with measured absorptivity higher than 90% in 9.7-27.3 GHz and low emissivity around 0.31 in 8-14 µm. Both metadevices are optically transparent and able to maintain good stealth ability under curved and conformal conditions. Our work offers an alternative approach for designing and fabricating flexible transparent metadevices for multispectral stealth, especially for applications in nonplanar surfaces.

The Characterization and Application of Two Liquid Crystal Mixtures in the Low THz Region

In the previous work, two new nematic liquid crystal (NLC) mixtures, E7-2 and S200-2, were produced by adding eight LC monomers to two commercial LCs S200 and E7, respectively. At λ = 589 nm, the birefringence (Δn) characteristics of the two LC nematic mixtures E7-2 (Δn = 0.260) and S200-2 (Δn = 0.298) are greater than those of the commercial LC E7 (Δn = 0.224) and S200 (Δn = 0.266). The properties (TN-I, ε//, Δɛ, K11, and K33) of these four NLCs were measured. A double-layer metal loop arrays modulation structure based on metamaterial (MM) metal–dielectric–metal (MDM) was designed and fabricated for use in the THz frequency range. The results show that the LC mixtures E7-2 and S200-2 have greater modulation depth (MD) and less modulation insertion loss (IL) than E7 and S200 at THz frequencies. The results show that LC mixtures have significant potential for designing active tunable LC-based devices in the THz and visible light range.