Accuracy and Reproducibility of Facial Measurements of Digital Photographs and Wrapped Cone Beam Computed Tomography (CBCT) Photographs

Comparison of methodologies for craniofacial soft-tissue cephalometrics: The value of virtual reality

BACKGROUND

Myriad options are available for plastic surgeons to perform soft-tissue analysis, which is vital to perioperative evaluation and research. Our objective is to compare the accuracy, precision, and efficiency of the available cephalometric modalities for conducting facial soft-tissue measurements.

METHODS

Twenty soft-tissue facial measurements were performed by 5 measurers with varying experiences on 5 adult subjects, using 6 methods-manual calipers, cone-beam CT, virtual reality (VR), 3D stereophotogrammetry, iPad-based 3D photogrammetry, and 2-dimensional photographs. Measurement sessions were timed and performed in triplicate, for a total of 9000 measurements. Intraclass correlation coefficient (ICC) was calculated for accuracy and one-way ANOVA was used for comparison. The coefficient of variation (CoV) was compared among groups to evaluate the precision of different methods by considering caliper measurements as the gold standard.

RESULTS

ICC among raters was 0.932, indicating excellent reliability. VR was significantly faster than other methods (137 s vs. 217 s for caliper, p < 0.001). CoV was the highest for 2D photographs and the lowest for VR (11.0 vs. 6.4, p < 0.001). The CoV of the caliper was similar to that of other methods, except for 2D photography, which was significantly higher. Measurements with the greatest absolute difference from caliper measurements, across modalities, were those around the eyes (left to right exocanthion), tragion to antitragion, and tragion to exocanthion.

CONCLUSION

2D photography is not an accurate method for cephalometric measurements. VR had the lowest variation between measurements, and was the fastest and equivalent to caliper measurements in accuracy. For studies involving a large number of cephalometrics, VR measurements may be a good option to improve study throughput.

Impact of restoration thickness and tooth shade background on the translucency of zirconia laminate veneers: An in vitro comparative study

Purpose

Our in vitro comparative study aimed to investigate the impact of thickness and tooth shade background on the translucency of highly translucent zirconia veneers.

Materials and Methods

A total of 75 5Y-TZP zirconia veneers of shade A1 were fabricated with thicknesses of 0.50 mm (n = 25), 0.75 mm (n = 25), and 1.0 mm (n = 25). The translucencies were measured on composite resin teeth with shades A1, A2, A3, A3.5, and A4 using a digital color imaging spectrophotometer. Data were analyzed using ANOVA and post hoc Tukey's test (p < 0.05).

Results

The translucency values were optimal for the veneers placed over the substrate teeth with shades A1 and A2, regardless of the veneer thickness. Additionally, veneers with a thickness of 0.50 mm exhibited significantly higher translucency than those with thicknesses of 0.75 mm and 1.0 mm.

Conclusions

Our study demonstrated that the translucency of the highly translucent zirconia veneers was influenced by both veneer thickness and tooth shade background. The optimal veneer thickness for achieving the highest translucency was 0.50 for the veneers with A1 and A2 shades placed over the substrate teeth.

Clinical Relevance

The optimal thickness for achieving the highest translucency of the highly translucent zirconia laminate veneers was 0.50 mm for the veneers with A1 and A2 shades placed over the substrate teeth. Clinicians and dental technicians could consider this when selecting materials for aesthetic restorations.

Forensic Gender Determination by Using Mandibular Morphometric Indices an Iranian Population: A Panoramic Radiographic Cross-Sectional Study

Gender determination is the first step in forensic identification, followed by age and height determination, which are both affected by gender. This study assessed the accuracy of gender estimation using mandibular morphometric indices on panoramic radiographs of an Iranian population. This retrospective study evaluated 290 panoramic radiographs (145 males and 145 females). The maximum and minimum ramus width, coronoid height, condylar height, antegonial angle, antegonial depth, gonial angle, and the superior border of mental foramen were bilaterally measured as well as bicondylar and bigonial breadths using Scanora Lite. Correlation of parameters with gender was analyzed by univariate, multiple, and best models. All indices except for gonial angle were significantly different between males and females and can be used for gender determination according to univariate model. Condylar height, coronoid height, and superior border of mental foramen and ramus were still significantly greater in males than in females after controlling for the effect of confounders (p < 0.05). Based on the best model, a formula including five indices of bicondylar breadth, condylar height, coronoid height, minimum ramus width, and superior border of mental foramen was used for gender determination. Values higher than 56% indicate male gender, while lower values indicate female gender, with 81.38% specificity for correct detection of females and 88.97% sensitivity for correct detection of males. Despite the satisfactory results, future research should focus on larger populations to verify the accuracy of the present findings.

Investigation of the Relationship between Sagittal Skeletal Nasal Profile Morphology and Malocclusions: A Lateral Cephalometric Film Study

The aim of this study was to evaluate the relationship between skeletal sagittal nasal profile morphology and sagittal skeletal malocclusions. Regarding lateral cephalometric films, the study was conducted in a total of 135 individuals without any prior orthodontic treatment (mean age of 17.91 ± 1.91), including 49 males (mean age 17.91 ± 1.16) and 86 females (mean age 17.78 ± 1.91 years). The groups were divided into two groups as male and female according to gender, and three groups as skeletal Class 1, Class 2, and Class 3 according to the Steiner's ANB angle. In addition, skeletal groups were compared within groups by dividing into two groups of male and female. A total of eight parameters, three skeletal sagittal angular (SNA, SNB, and ANB angles), four nasal linear (R-A, N-A, N-ANS, and N-R distances) and one nasal angular (N1-N2/N2-R angle), were measured on each cephalometric film. The arithmetic mean and standard deviation of all measured nasal parameters were calculated. For statistical analysis, independent sample t-test and one-way analysis of variance (One-Way ANOVA) were used for normally distributed data, and Mann Whitney U and Kruskal Wallis tests were used for data that did not show normal distribution. For statistical analysis, p < 0.05 was considered significant. R-A, N-A, and N-ANS linear nasal parameters differed significantly between the male and female groups, which were evaluated regardless of the skeletal groups, with a higher rate in males (p < 0.05). N-R linear nasal parameter showed a statistically significant difference between skeletal malocclusion groups, which were evaluated regardless of gender. N-R distance was found to be significantly longer in skeletal Class 3 individuals than in Class 1 and 2 individuals (p < 0.05). There was no statistically significant difference in nasal bone concavity angle in all groups (p > 0.05). R-A and N-A linear nasal parameters showed statistically significant differences between male and female sex groups in all skeletal malocclusion classes (p < 0.05). At first, results showed that males had longer measurements than females in all linear nasal parameters. Second, longer measurements were found in all linear nasal parameters in skeletal Class 3 individuals than those in skeletal Class 1 and Class 2 individuals. Third, the nasal bone concavity angle was greater in skeletal Class 2 individuals than the others.

Integration of Digital and Analog Workflow to Achieve Predictable Esthetics: A Novel Approach

The use of digital smile designing simplifies the restoration of esthetics. In this article, a case of diastema and incisal notching in anterior teeth was rehabilitated with porcelain laminate veneers using combination of digital and analog workflow.

Comparison of spheno-occipital synchondrosis maturation stages with three-dimensional assessment of mandibular growth

BACKGROUND

This study aimed to compare spheno-occipital synchondrosis (SOS) maturation stages with a three-dimensional assessment of mandibular growth.

METHODS

This is a cross-sectional study of a retrospective type, in which cone-beam computed tomography (CBCT) images of 500 patients aged 6 to 25 years (226 males and 274 females) were analyzed. The SOS was evaluated using the four-stage scoring system; completely open, partially fused, semi-fused, or completely fused. The SOS scoring and three-dimensional cephalometric measurements were analyzed by Invivo 6.0.3 software. Descriptive and analytical statistics were performed, and a P-value < 0.05 was considered statistically significant.

RESULTS

There was a statistically significant difference in mandibular measurements among SOS maturation stages in both sexes (P < 0.05). The skeletal growth increments of mandibular variables across the SOS stages had higher mean differences between SOS stages 2 and 3 than those between stages 1 and 2 and stages 3 and 4 in both sexes. The mandibular growth curves increased with chronological age (earlier in females) and SOS maturation stages (mostly in stages 1, 2, and 3 than stage 4).

CONCLUSIONS

The SOS maturation stages are valid and reliable mandibular skeletal indicators as evaluated with three-dimensional cephalometric mandibular measurements. The findings of growth increments and constructed growth curves of mandibular growth might be helpful in diagnosis and treatment planning.

Implant Survival Rate and Prosthetic Complications of OT Equator Retained Maxillary Overdenture: A Cohort Study

(1) Background: The overdenture is a complete denture, an implant-supported prosthesis, that the patient can remove at home for the usual oral hygiene procedures, thanks to a simple and intuitive anchoring system. Clinically, the execution of this rehabilitation for the lower arch is often favored, but when it is necessary to limit the extension of the palate in the upper arch, it can represent the least invasive and economic solution. The aim of the study is to analyze post-loading implant loss for implant-supported prostheses in the edentulous upper jaw. (2) Methods: This retrospective study was carried out on patients who received a superior overdenture on four implants for rehabilitation. A total of 42 patients were included in this study and initially evaluated clinically and radiographically. The follow-up period for patients after delivery of the upper overdenture is between 48 and 72 months. A total of 168 implants were inserted and monitored in this period. Clinical and radiographic tests were carried out on all 168 implants, with constant re-evaluation. (3) Results: The overall implant survival rate is 92.9%, a value that corresponds to those present in the literature in previously published studies. There were few prosthetic complications, mainly the detachment of anterior prosthetic teeth. (4) Conclusions: Most of these complete prostheses, which as antagonist had another previously made overdenture on four or on two implants, achieved excellent success rates in this study at 72 months.

Anterior Upper Teeth Golden Proportion Analysis with Millimetric Templates: An Invention Developed at Londrina State University

In order to achieve aesthetic and harmonious smile results, the use of anterior upper teeth golden proportion concepts represents reliable and scientific based guidelines. However, measuring, recording and analysing teeth and smiles biometric values proves to be a clinical and laboratory routine chalenge, once it is time consuming and demands additional especific math calculus or formulas. The aim of this paper is present an invention, “anterior upper teeth golden proportion millimetric templates,” a set of instruments fabricated in order to achieve precise and fast millimetric measures, once they present predefined geometrical drawings and diagrams. Currently, when planning aesthetic tooth size modifications treatments, tools are used as pachymeters, dry edge compass, or some softwares. Most of times this strategy relies on professional expertise and intuiton, which shows to be limitating factors with the need of trial-and-error training and an accurate critical and artistic sense. Unfortunately, this is not inherent to all professionals, especially undergraduate dental school students. Thus, the templates bring differentials and advantages, being versatile and convenient, allowing countless clinical and laboratory uses, even over a cellphone or a computer screen. An excellent diagnostic aid providing ideal teeth proportions and positioning, increasing the chances of success in dental treatment planning.

Relationship between Posterior Permanent Dentition Pattern and Radiographic Changes of the Mandibular Condyle

This study assessed the relationship between posterior permanent dentition and radiographic changes of the mandibular condyle. This descriptive, cross-sectional study was conducted on 300 panoramic radiographs of patients over 40 years of age (188 females and 112 males). Panoramic radiographs were evaluated for condylar changes such as flattening, subcortical sclerosis, subcortical cyst, erosion, osteophytes, and generalized sclerosis. Presence of muscle pain and temporomandibular joint (TMJ) pain and sounds, and history of TMJ trauma were also assessed. The occlusal scheme of posterior teeth was analyzed according to the Eichner's index. The frequency of condylar changes was calculated in the right and left sides, and their association with posterior permanent dentition was analyzed by the Chi-square test (alpha = 0.05). The frequency of flattening, muscle pain, TMJ sounds, and erosion was 11.7%, 9.7%, 5.7%, and 3.7% in the right side, respectively. The frequency of flattening, muscle pain, erosion, and subcortical cyst was 12%, 9.3%, 5%, and 5% in the left side, respectively. The frequency of bilateral muscle pain, flattening, TMJ sounds, and TMJ pain was 18%, 16.7%, 11.7%, and 9.3%, respectively. Cases with TMJ trauma, generalized sclerosis, and osteophytes were few. According to the Eichner's index, most patients with condylar changes had classes A and B, and a smaller percentage had class C. No significant difference was noted between healthy individuals and those with condylar changes regarding dentition patterns. No relationship existed between condylar changes and posterior permanent dentition pattern.

Texture-Based Neural Network Model for Biometric Dental Applications

BACKGROUND

The aim is to classify dentition using a novel texture-based automated convolutional neural network (CNN) for forensic and prosthetic applications.

METHODS

Natural human teeth (n = 600) were classified, cleaned, and inspected for exclusion criteria. The teeth were scanned with an intraoral scanner and identified using a texture-based CNN in three steps. First, through preprocessing, teeth images were segmented by extracting the front-facing region of the teeth. Then, texture features were extracted from the segmented teeth images using the discrete wavelet transform (DWT) method. Finally, deep learning-based enhanced CNN models were used to identify these images. Several experiments were conducted using five different CNN models with various batch sizes and epochs, with and without augmented data.

RESULTS

Based on experiments with five different CNN models, the highest accuracy achieved was 0.8 and the precision was 0.8 with a loss value of 0.9, a batch size of 32, and 250 epochs. A comparison of deep learning models with different parameters showed varied accuracy between the different classes of teeth.

CONCLUSION

The accuracy of the point-based CNN method was promising. This texture-identification method will pave the way for many forensic and prosthodontic applications and will potentially help improve the precision of dental biometrics.

Smartphone-Based Facial Scanning as a Viable Tool for Facially Driven Orthodontics?

The current paradigm shift in orthodontic treatment planning is based on facially driven diagnostics. This requires an affordable, convenient, and non-invasive solution for face scanning. Therefore, utilization of smartphones' TrueDepth sensors is very tempting. TrueDepth refers to front-facing cameras with a dot projector in Apple devices that provide real-time depth data in addition to visual information. There are several applications that tout themselves as accurate solutions for 3D scanning of the face in dentistry. Their clinical accuracy has been uncertain. This study focuses on evaluating the accuracy of the Bellus3D Dental Pro app, which uses Apple's TrueDepth sensor. The app reconstructs a virtual, high-resolution version of the face, which is available for download as a 3D object. In this paper, sixty TrueDepth scans of the face were compared to sixty corresponding facial surfaces segmented from CBCT. Difference maps were created for each pair and evaluated in specific facial regions. The results confirmed statistically significant differences in some facial regions with amplitudes greater than 3 mm, suggesting that current technology has limited applicability for clinical use. The clinical utilization of facial scanning for orthodontic evaluation, which does not require accuracy in the lip region below 3 mm, can be considered.

A CBCT Evaluation of Esthetic Preference Regarding the Perceived Facial Attractiveness of Young Korean Female Adults with a Normal Skeletal Pattern

The aim of this study was to determine the factors that affect esthetic preference regarding the perceived facial attractiveness of young Korean female adults with a normal skeletal pattern using cone-beam computed tomography (CBCT). After reorienting the CBCT images of 40 young Korean female adults, three-dimensional (3D) measurements were analyzed, and five 3D facial images were digitally constructed. A computer-based questionnaire was used to determine perceived facial attractiveness by scoring from 1 (very unattractive) to 10 (very attractive). Esthetic perception and the most influential facial view and component were examined and compared by orthodontists, general dentists, and laypeople to evaluate facial attractiveness. Compared to the unattractive group, the attractive group had significantly greater values for Pog-NB, L1SI-FH, U lip thickness, L lip-U lip, and Nasolabial angle, along with significantly lower values for U1SI-FH and Cant of U lip; the attractive group also had a more retruded U1MP (p < 0.01), L1MP (p < 0.01), U lip (p < 0.05), and L lip (p < 0.01) relative to N, as well as a more retruded U lip (p < 0.05) and L lip (p <0.001) relative to esthetic lines. Orthodontists and general dentists were more likely to consider the profile view. When evaluating facial attractiveness, orthodontists and laypeople more often focused on the lips and chin. When evaluating facial attractiveness, all evaluators showed a high esthetic preference for retroclination and retrusion of the incisors and lips, but there were some differences in how they perceived facial attractiveness. Therefore, the ultimate perception of facial attractiveness needs to be based on the esthetic perceptions of laypeople.

Cone-Beam Computed Tomography and the Related Scientific Evidence

Cone-beam computed tomography (CBCT) is the most common three-dimensional (3D) imaging technique used in dentistry [...]

Modeling and Simulating an Orthodontic System Using Virtual Methods

Cone beam computed tomography (CBCT) is a modern imaging technique that uses X-rays to investigate the structures of the dento-maxillary apparatus and obtain detailed images of those structures. The aim of this study was to determine a functional mathematical model able to evaluate the elastic force intensity on each bracket and tube type element and the ways in which those components act on the orthodontic system being used. To analyze a real orthodontic system, we studied the case of a 13-year-old female patient. To transfer geometric information from tomographic images, we used the InVesalius software. This software can generate three-dimensional reconstructions based on sequences and files in the DICOM format and was purchased from CBCT equipment. We analyzed and processed the geometries of the converted tissues in InVesalius using the Geomagic software. After using the Geomagic software, we exported the resulting model to the SolidWorks software used in computer-aided design. In this software, the model is transformed into a virtual solid. After making the geometric model, we analyzed the model using the Ansys Workbench software, which incorporates finite element analysis techniques. Following the simulations, we obtained result maps, which showed the complete mechanical behavior of the analyzed structures.

Transverse Analysis of Maxilla and Mandible in Adults with Normal Occlusion: A Cone Beam Computed Tomography Study

Objectives: To study the transverse widths of maxilla and mandible and their relationship with the inclination of first molars. Materials and Methods: Fifty-six untreated adults (12 males, 44 females) with normal occlusion were included. On each Cone Beam Computed Tomography (CBCT) image of the subject, inter-buccal and inter-lingual bone widths were measured at the levels of hard palate, alveolar crest and furcation of the first molars, and maxillomandibular width differentials were calculated. In addition, the buccolingual inclination of each first molar was measured and its correlation with the maxillomandibular width differential was tested. Results: At the furcation level of the first molar, the maxillary inter-buccal bone width was more than the mandibular inter-buccal bone width by 1.1 ± 4.5 mm for males and 1.6 ± 2.9 mm for females; the mandibular inter-lingual bone width was more than the maxillary inter-lingual bone width by 1.3 ± 3.6 mm for males and 0.3 ± 3.2 mm for females. For females, there was a negative correlation between the maxillomandibular inter-lingual bone differential and maxillary first molar buccal inclination (p < 0.05), and a positive correlation between the maxillomandibular inter-lingual bone differential and mandibular first molar lingual inclination (p < 0.05). Conclusions: This is a randomized clinical study on transverse analysis of maxilla and mandible in adults with normal occlusion using CBCTs. On average: (1) At the furcation level of the first molars, the maxillary inter-buccal bone width was slightly wider than mandibular inter-buccal bone width; whereas the mandibular inter-lingual bone width was slightly wider than maxillary inter-lingual bone width; (2) A statistically significant correlation existed between the maxillomandibular transverse skeletal differentials and molar inclinations.

Three-dimensional evaluation of soft tissues in hyperdivergent skeletal class II females in Guangdong

Objectives

To establish the three-dimensional facial soft tissue morphology of adolescent and adult females in the Guangdong population and to study the morphological characteristics of hyperdivergent skeletal class II females in Guangdong compared with that of normodivergent class I groups.

Materials and methods

The 3dMDface system was used to capture face scans of 160 patients, including 45 normal and 35 hyperdivergent skeletal class II adolescents (aged 11–14 years old) and 45 normal and 35 hyperdivergent skeletal class II adults (aged 18–30 years old). Thirty-two soft tissue landmarks were mapped, and 21 linear, 10 angular and 17 ratio measurements were obtained by 3dMDvultus analysis software. Data were assessed with a t-test of two independent samples between the normal adolescent and adult groups and between the normal and hyperdivergent skeletal class II groups.

Results

The linear measurements of the Guangdong adult females were larger than those of the adolescents in both Class I and Class II groups. However, the angular and ratio measurements had no significant difference. The vertical linear measurements were higher and the sagittal and transverse linear measurements were smaller in the hyperdivergent class II group (p < 0.05). The soft tissue ANB angle, chin-lip angle, and mandibular angle were significantly larger and the soft tissue facial convexity angle and nasal convexity angle were significantly smaller in the hyperdivergent class II group (p < 0.05). Additionally, there were significant differences in the ratio measurements between the hyperdivergent class II groups and the control groups (p < 0.05).

Conclusions

The three-dimensional facial morphology of Guangdong adolescent and adult females was acquired. The facial soft tissue measurements of the adults were higher in the three dimensions except for the facial convexity and proportional relationships which were similar, suggesting that the growth pattern remained the same. The three-dimensional facial soft tissue features of hyperdivergent skeletal class II were characterized by the terms “long, convex, and narrow”. Three-dimensional facial measurements can reflect intrinsic hard tissue characteristics.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12880-022-00782-w.

Bone Augmentation for Implant Placement: Recent Advances

There are various advancements in biomaterials and methods for bone augmentation. This article aims to review the recent advances in bone augmentation for dental implants. Relevant articles on bone augmentation for dental implants were searched in PubMed/Medline, Scopus, Google Scholar, and Science Direct published in English literature published between January 1996 and March 2021. Relevant studies on bone grafts for dental implants were included and critically analyzed in this review. Various biomaterials can be used to augment bone for implant placement. Each graft procedure has advantages and disadvantages in each clinical application and needs to choose the graft material with a high success rate and less morbidity.

Applications and Clinical Behavior of BioHPP in Prosthetic Dentistry: A Short Review

(1) Background: BioHPP® (Bredent, UK) is a partially crystalline poly ether ether ketone (PEEK) that is strengthened using ceramic. PEEK and its various formulations represent a very interesting alternative, and has been in-depth with its literature in recent years; (2) Methods: A PubMed and Scopus search for the term “BioHPP” yielded 73 results and 42 articles which were included in this short review. Considering the scarce literature on the subject, each article was considered in this review; (3) Results: the articles analyzed are very recent, all published in the last 5 years. Their clinical evaluation of BioHPP® highlights many positive aspects, and few articles have highlighted critical issues in its multiple clinical applications; (4) Conclusions: this material is not only extremely interesting for the future, but possesses characteristics suitable for clinical application today, for endocrowns, small adhesive bridges, temporary prostheses and for immediate loads on implant restorations. The excellent aesthetics and the possibility of simple reprocessing of the restorations made with this material invite its clinical application.

Evaluation of Electromyographic Activity of Masticatory Muscles in Adults with Posterior Crossbite

Introduction

There is evidence that patients with posterior crossbite (PXB) have neuromuscular changes in the masticatory muscles. However, up to the present time, the relationship among these changes on the electromyographic activity of the masticatory muscles is still unclear.

Objective

To systematic review the available literature on the electromyographic activity of masticatory muscles in adults with PXB.

Methods

Between August 22 and September 9, 2020, we searched the following seven electronic databases: PubMed, EMBASE, Web of Science, Cochrane Library, SciELO, LILACS, and Scopus. No restrictions were applied regarding the language and year of publication. This systematic review was registered in the Prospective Register of Systematic Reviews (PROSPERO - CRD42020205057) database and conducted using the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) guidelines. After data selection and extraction, the methodological quality of the selected studies was conducted independently by two reviewers, using two different evaluation tools.

Results

6957 records were initially located after the search process. In the end, eight papers were selected. Most studies were classified as having average to low methodological quality and moderate to high risk of bias. Based on the available evidence, adult patients with PXB have electromyographic activity changes in the masticatory muscles when compared with individuals without PXB. Moreover, adult patients with unilateral posterior crossbite (UPXB) have asymmetrical electromyographic activity when the crossbite side is compared with the noncrossbite side.

Conclusion

Despite the lack of studies with high methodological quality, electromyographic evaluation of masticatory muscles should be considered in the diagnosis and in the orthodontic treatment plan of patients with PXB. Prospective studies with a higher sample size and follow-up time, conducted using a rigorous scientific methodology, are necessary to reach a more reliable conclusion.

Titanium dioxide dental implants surfaces related oxidative stress in bone remodeling: a systematic review

Background

Titanium dioxide dental implants have a controversial effect on reactive oxygen species (ROS) production. ROS is necessary for cellular signal transmission and proper metabolism, but also has the ability to cause cell death as well as DNA, RNA, and proteins damage by excessive oxidative stress. This study aimed to systematically review the effect of titanium dioxide dental implant-induced oxidative stress and its role on the osteogenesis-angiogenesis coupling in bone remodeling.

Methods

This systematic review was performed conforming to preferred reporting items for systematic review and meta-analysis (PRISMA) model. Four different databases (PubMed, Science Direct, Scopus and Medline databases) as well as manual searching were adopted. Relevant studies from January 2000 till September 2021 were retrieved. Critical Appraisal Skills Programme (CASP) was used to assess the quality of the selected studies.

Results

Out of 755 articles, only 14 which met the eligibility criteria were included. Six studies found that titanium dioxide nanotube (TNT) reduced oxidative stress and promoted osteoblastic activity through its effect on Wnt, mitogen-activated protein kinase (MAPK) and forkhead box protein O1 (FoxO1) signaling pathways. On the other hand, three studies confirmed that titanium dioxide nanoparticles (TiO₂NPs) induce oxidative stress, reduce ostegenesis and impair antioxidant defense system as a significant negative correlation was found between decreased SIR3 protein level and increased superoxide (O₂ ^•-). Moreover, five studies proved that titanium implant alloy enhances the generation of ROS and induces cytotoxicity of osteoblast cells via its effect on NOX pathway.

Conclusion

TiO₂NPs stimulate a wide array of oxidative stress related pathways. Scientific evidence are in favor to support the use of TiO₂ nanotube-coated titanium implants to reduce oxidative stress and promote osteogenesis in bone remodeling. To validate the cellular and molecular cross talk in bone remodeling of the present review, well-controlled clinical trials with a large sample size are required.

A Novel Approach for Dynamic (4d) Multi-View Stereo System Camera Network Design

Image network design is a critical factor in image-based 3D shape reconstruction and data processing (especially in the application of combined SfM/MVS methods). This paper aims to present a new approach to designing and planning multi-view imaging networks for dynamic 3D scene reconstruction without preliminary information about object geometry or location. The only constraints are the size of defined measurement volume, the required resolution, and the accuracy of geometric reconstruction. The proposed automatic camera network design method is based on the Monte Carlo algorithm and a set of prediction functions (considering accuracy, density, and completeness of shape reconstruction). This is used to determine the camera positions and orientations and makes it possible to achieve the required completeness of shape, accuracy, and resolution of the final 3D reconstruction. To assess the accuracy and efficiency of the proposed method, tests were carried out on synthetic and real data. For a set of 20 virtual images of rendered spheres, completeness of shape reconstruction was up by 92.3% while maintaining accuracy and resolution at the user-specified level. In the case of the real data, the differences between predictions and evaluations for average density were in the range between 33.8% to 45.0%.

Postoperative Complications in Genioplasty and Their Association with Age, Gender, and Type of Genioplasty

Objective

The objective of our study was to determine the incidence of postoperative complications associated with different kinds of genioplasties done with or without concomitant orthognathic surgeries.

Materials and Methods

Patients in whom facial asymmetry was corrected by genioplasty with age ranging from 16 to 55 at the Department of Oral and Maxillofacial Surgery were included in the study. Patients with facial asymmetry due to congenital problems were excluded.

Results

59 patients were included, of which 38 were males and 21 were females with the age range of 16-55 (mean: 27.3729, Std. deviation: 4.70472). Advancement genioplasty was performed in 15.3%, reduction genioplasty was done in 16.9%, and advancement genioplasty with rotation was performed in 67.8% cases. In 28.8% cases, genioplasty was performed as an adjunct procedure with orthognathic surgery, and in 71.2% cases, genioplasty was performed alone. 3.4% patients developed infection, 8.5% had hematoma, and 6.8% had temporary numbness. Postoperative complications were seen more in men than in women. Correction of chin asymmetry by rotation/advancement showed the highest number of complications (84%).

Conclusion

Temporary neurosensory disturbance of the inferior alveolar nerve is the most common complication that occurs after genioplasty. Patients shall be counselled preoperatively, and informed consent shall be obtained prior to surgery.

Dental Curriculum's Continuing Improvement in the North American and Gulf Cooperation Council (GCC) Education Systems

Background:

Dynamic oral health care needs, alongside a diverse demographic of patients, presents a challenge to dental clinicians as they strive to resolve the ever-increasing demand for quality oral care service. Claims have arisen that the most appropriate way of speeding up the slow change in adopting innovations within the dental practice is by updating dentists' knowledge and skills through improving the undergraduate students' curriculum.

Objective:

This review compares the dental curriculum's continuing improvement processes between the North American and Gulf Cooperation Council (GCC) countries.

Methods:

The process of analysis consisted of identifying, examining, and interpreting patterns and themes within textual data, and then determining how each of these help answer the research questions.

Results:

Efforts to implement the dental curriculum's continuous improvement processes in the North American and GCC countries are evident, but the significant barriers for the dental curriculum's continuing improvement among the North American countries include the consequences of a compressed four-year curriculum, reliance on professional regulations, insufficient focus on patient perceptions, and the lack of a more theoretically robust approach to self-reflection. Conversely, amongst the GCC countries, the available literature states that the most significant factors hindering the dental curriculum's continuing improvement include deficient leadership attributes and low research productivity.

Conclusion:

The North American and GCC regions will benefit from the new dental curriculum and result in producing more competent dental practitioners, with improved leadership and patient-centered care. However, it has been observed that the dental curriculum’s continuous improvement processes are adopted slowly, particularly among the GCC countries.

Ultrasound Imaging in Dentistry: A Literature Overview

(1) Background: the frequency with which diagnostic tests are prescribed with exposure to ionizing radiation, a cause of biological damage, has been studied, and with much more attention, patients are subjected to these diagnostic tests for diagnosis and follow-up. This review aimed, given the recent developments of this technology, to evaluate the possible use of ultrasound in different branches of dentistry. The possibility of applying ionizing-radiation-free diagnostic exams in dentistry, overcoming the limits of this application, has led scientific research in this area to obtain interesting results that bode well for the future. (2) Methods: a search for articles on the application of ultrasounds in dentistry was performed using the PubMed electronic database. (3) Results: only 32 studies were included, and these clearly stated that this examination is widely usable and in great progress. (4) Conclusions: regarding the modern application techniques of this diagnostic test, it is essential to consider technological evolution as an objective to reduce the damage and side effects of necessary diagnostic tests. The use of ultrasound in dentistry can represent a valid radiation-free alternative, in certain contexts, to the other most used exams.

Influence of the Use of a Collagen Membrane Placed on the Bone Window after Sinus Floor Augmentation-An Experimental Study in Rabbits

BACKGROUND

We studied the influence on healing of a resorbable membrane covering the osteotomy site after maxillary sinus grafting, evaluated in different regions of the augmented area.

METHODS

Maxillary sinus augmentation was performed in 24 New Zealand rabbits. Osteotomy, 4 × 6 mm, were performed bilaterally. A collagenated cortico-cancellous porcine bone was used to fill the elevated region. A collagen membrane was randomly placed over the osteotomy site on one side (MG), and the other side was left uncovered (NMG). The animals were euthanized after 2, 4, and 8 weeks; and histomorphometric analysis was performed in eight different regions.

RESULTS

New bone percentages were similar in both groups. There were no statistically significant differences. In MG, the overall percentages were 15.6 ± 7.3%, 22.9 ± 6.1%, and 24.9 ± 12.0% after 2, 4, and 8 weeks, respectively. In NMG, the percentages were 11.2 ± 4.5%, 24.1 ± 5.7%, and 24.5 ± 15.7%, respectively. The proportions of new bone in the various regions after 8 weeks were 31 ± 8.9% and 29.9 ± 9.1% in the bone walls region, 25 ± 10.1% and 32.8 ± 9.1% in the submucosa region, 22.6 ± 21.6% and 10.9 ± 11.5 in the middle region, 17.3 ± 14% and 13.4 ± 9.8% in the close-to-window region, and 21.8 ± 11.6%, 19.1 ± 6.4% in the osteotomy region-for MG and NMG, respectively.

CONCLUSIONS

In both groups the greatest amounts of bone formation occurred near to the pre-existing bone walls, followed by the sub-mucosa region. The smallest amounts were found in the close-to-window region, followed by the central region. The placement of a collagen membrane to cover the osteotomy site did not influence the amount of new bone formation after sinus grafting.

Influence of Different Beverages on the Color Stability of Nanocomposite Denture Base Materials

BACKGROUND

The effect of beverages on nanocomposite denture base materials is neglected. Therefore, this study aimed to investigate the influence of different beverages (coffee, tea, cola, and mineral water) on the color stability of nanoparticles-modified denture base materials (DBMs).

MATERIALS AND METHODS

A total of 280 specimens (n = 10/group) were prepared from heat-polymerized acrylic resin modified with different concentrations (3% and 7%) of zirconium dioxide (nano-ZrO2), titanium dioxide (nano-TiO2), and silicon dioxide (nano-SiO2) nanoparticles, while 0% was taken as a control. Color change (∆E) of the specimens was evaluated after simulating 6-month immersion time in four commonly used beverages, coffee, tea, cola, and mineral water, as experimental groups. Color stability was measured using a spectrophotometer, and then values were converted to National Bureau of Standards units (NBS units). The one-way ANOVA test was applied to compare color change (ΔE) results followed by Bonferroni's post hoc test (α = 0.05).

RESULTS

The results showed that the heat-polymerized acrylic resin modified with different types of nanoparticles showed lower color changes after being immersed in beverage solutions compared to the unmodified group (P < 0.001), so the color stability of heat-polymerized acrylic resin was significantly enhanced by the addition of several nanoparticles; nano-ZrO2 showed the lowest ΔE followed by nano-TiO2 and then nano-SiO2. Regardless of the filler type, 3% concentration showed lower mean ΔE than 7% concentration. Regarding the beverage solutions, the greatest color change was found in the coffee group followed by tea and cola, while water showed the least changes.

CONCLUSION

Modification of heat-polymerized acrylic resin with certain amounts of nano-ZrO2, nano-TiO2, and nano-SiO2 may be useful in improving color stability.

Comparison of the Accuracy of Fixture-Level Implant Impression Making with Different Splinting Techniques

Objectives

The impression-taking technique is one of the most critical factors that not only prevents the shrinkage caused by polymerization but also enhances the accuracy of implant impressions. Also, choosing the right time of taking impressions after splinting implants is one of the important criteria that affects the impression-taking technique. Accordingly, the present study aimed to evaluate the accuracy of different splint methods for implant impressions made at different times.

Methods

In this in vitro study, a two-piece metallic index was prepared, and the patient's jaw was simulated by placing self-cured acrylic resin in the lower part of the index. Then, two holes were made in the acrylic resin at a specific distance from each other, and the analogs were placed in these holes. Splinting of impression copings was carried out with autopolymerized acrylic resin (GC Pattern resin LS, GC America Inc., USA), and an open tray impression approach was performed. Thirty-six casts in three groups (n = 12) were fabricated from the acrylic model. After scanning the casts, the impression accuracy was compared between the three study groups by measuring the distance between the outer portions of the scan bodies screw-retained on implant analogs inside the cast using the Exocad software (2015.07 version). Group 1: splinting impression copings with autopolymerized acrylic resin and impression making immediately after the setting time (4 minutes); group 2: splinting and impression procedure after 17 minutes with splint sectioning and reconnection; group 3: splinting and impression procedure after 24 hours with splint sectioning and reconnection. The data were analyzed using SPSS 17 using the Kruskal–Wallis test.

Results

The mean distance measured in group 1 was 19.14 ± 0.029 mm, which was significantly lower than the main model. The distances were 19.15 ± 0.039 and 19.159 ± 0.33 mm in groups 2 and 3, respectively. These two groups were not significantly different from the main model. Moreover, the mean distance measured in the three impression techniques was similar.

Conclusions

There was no significant difference in the measurements between group 2, group 3, and the main model. Therefore, dentists can make an impression after 17 minutes to reduce chair time.

Assessment of Anterior Loop of Inferior Alveolar Nerve and Its Anatomic Variations with Age, Gender, and Dentition Status in Indian Population: A CBCT Study

Background

The posterior region of the mandible is more often related to iatrogenic errors, but the interforaminal region is also not spared for neurovascular complications. This study aimed to use CBCT images to evaluate the prevalence of anterior nerve looping and its variations with age, gender, and dentition status.

Methods

This retrospective study was carried out by studying 600 CBCT scans retrieved from archival records of a CBCT center in Lucknow. The scans were inspected by two trained investigators. The length of the anterior loop was measured using the measuring tool of Carestream 3D imaging software. Descriptive and analytical tests were performed.

Results

The prevalence of the anterior loop of the inferior alveolar nerve was found to be 56%. The prevalence was found to be more on the right side (29.0%) compared to the left side (27.0%). The most common anterior looping of the inferior alveolar nerve was type 3 followed by type 1. Males were found to have significantly higher loops compared to females. The number of loops was found to decrease significantly with age. The mean length of the loop was found to vary from 1.14 to 1.61 mm.

Conclusion

The anterior looping of IAN is very much prevalent in the Lucknow population. The use of the CBCT technique and appropriate preplanning prior to surgery or implant placement should be performed to prevent nerve injury.

Diagnostic Accuracy of CBCT for Detection of Second Canal of Permanent Teeth: A Systematic Review and Meta-Analysis

INTRODUCTION

Missed canal is one of the common reasons for nonsurgical endodontic retreatments. The missed canals were frequently associated with periapical pathology. The aim of this systematic review was to find the diagnostic accuracy of CBCT for detection of the second canal of the root canal system of permanent teeth.

MATERIALS AND METHODS

The articles were selected from seven electronic databases according to selection criteria. All eligible studies were judged by the reviewers. The selected studies were checked with the QUADAS-2 tool for risk of bias and applicability concerns. Finally, 12 studies were selected for qualitative and quantitative analyses. The summary estimates of sensitivities and specificities and SROC curves were calculated and drawn by RevMan 5.3 and MetaDTA software.

RESULTS

Summary estimates of CBCT for detection of second canal anatomy in permanent teeth were 94% sensitivity and 93.1% specificity. 96.6% sensitivity of MB2 was followed by 88.8% sensitivity of maxillary and mandibular premolars and 81% that of mandibular molars. The specificity of 97.6% for premolars was trialed by 85% specificity of mandibular molars and MB2. For permanent mandibular canines, 67% sensitivity and 100% specificity were estimated. CBCT showed more agreement with detecting the second canal with micro-CT, estimating 100% sensitivity and 95.6% specificity. The highest prevalence of the second canal comprised the highest sensitivity of 99.1% and lowest specificity of 77.5%. After the exclusion of case-control studies, a 3% drop of sensitivity from the summary estimate was observed. Multiple spectrum of the second canal had 8.6% higher sensitivity and 4.4% lower specificity than single spectrum.

CONCLUSION

CBCT is informative for detecting the second canal. Clinicians should keep in mind that the accuracy can vary in different types of teeth, with the prevalence of second canal across different populations, and with the spectrum of second canal anatomy in spite of the reviewers having postulated overestimation of the findings.