Three-Dimensional Assessment of Morphological Changes Following Nasoalveolar Molding Therapy in Cleft Lip and Palate Patients: A Case Report

Predictability of Maxillary Molar Distalization and Derotation with Clear Aligners: A Prospective Study

Clear aligners are employed daily for the treatment of Class II malocclusions, when a valid option involves distalization and derotation of the upper first and second molars. Evidence regarding the predictability of these movements is slight, and the treatment outcome that clinicians plan may not be achieved. Therefore, the purpose of this study is to assess the accuracy of distalization and derotation with clear aligners. Geomagic Control X, a 3D quality control software, was used to superimpose digital models of the pre-treatment, post-treatment, and virtual plan (ideal post-treatment) measurements of 16 patients (4 M, 12 F; mean age 25.7 ± 8.8 years). Linear and angular measurement tools were used to calculate the amount of tooth movement prescribed and achieved. Distal displacement of the buccal cusps had an overall accuracy of 69% for the first molar and 75% for the second molar. The accuracy of molar derotation was higher for the first molar (77.5%) than for the second molar (62.7%). The aligners were not able to achieve 100% of the ideal post-treatment result; thus, planning of refinements is often needed. However, clear aligners can be regarded as a valuable option for the distalization of first and second molars.

Recent Advances in Nasoalveolar Molding Therapy Using 3D Technology

Presurgical Nasoalveolar Molding (NAM) is an adjunctive treatment modality designed to reorient misaligned tissue structures and nasal cartilage in cleft lip and/or palate (CL/P) patients. Recent advances in NAM therapy focus on modifications to the intraoral molding plate or nasal stent intended to improve treatment outcomes, ease of use, compliance, and cost-effectiveness. Notably, 3D technological advancements have been employed to design NAM devices more efficiently and create objective, standardized means of measuring progressive morphological changes during therapy. These advances are designed to incorporate 3D technology in the treatment of cleft lip and/or palate to render it more precise, accurate, and time-efficient.

[Deep learning-assisted construction of three-demensional facial midsagittal plane]

OBJECTIVE

To establish a deep learning algorithm that can accurately determine three-dimensional facial anatomical landmarks, multi-view stacked hourglass convolutional neural networks (MSH-CNN) and to construct three-dimensional facial midsagittal plane automatically based on MSH-CNN and weighted Procrustes analysis algorithm.

METHODS

One hundred subjects with no obvious facial deformity were collected in our oral clinic. Three-dimensional facial data were scanned by three-dimensional facial scanner. Experts annotated twenty-one facial landmarks and midsagittal plane of each data. Eighty three-dimensional facial data were used as training set, to train the MSH-CNN in this study. The overview of MSH-CNN network architecture contained multi-view rendering and training the MSH-CNN network. The three-dimensional facial data were rendered from ninety-six views that were fed to MSH-CNN and the output was one heatmap per landmark. The result of the twenty-one landmarks was accurately placed on the three-dimensional facial data after a three-dimensional view ray voting process. The remaining twenty three-dimensional facial data were used as test set. The trained MSH-CNN automatically determined twenty-one three-dimensional facial anatomical landmarks of each case of data, and calculated the distance between each MSH-CNN landmark and the expert landmark, which was defined as position error. The midsagittal plane of the twenty subjects' could be automatically constructed, using the MSH-CNN and Procrustes analysis algorithm. To evaluate the effect of midsagittal plane by automatic method, the angle between the midsagittal plane constructed by the automatic method and the expert annotated plane was calculated, which was defined as angle error.

RESULTS

For twenty subjects with no obvious facial deformity, the average angle error of the midsagittal plane constructed by MSH-CNN and weighted Procrustes analysis algorithm was 0.73°±0.50°, in which the average position error of the twenty-one facial landmarks automatically determined by MSH-CNN was (1.13±0.24) mm, the maximum position error of the orbital area was (1.31±0.54) mm, and the minimum position error of the nasal area was (0.79±0.36) mm.

CONCLUSION

This research combines deep learning algorithms and Procrustes analysis algorithms to realize the fully automated construction of the three-dimensional midsagittal plane, which initially achieves the construction effect of clinical experts. The obtained results constituted the basis for the independent intellectual property software development.

[Deep learning-assisted construction of three-demensional facial midsagittal plane]

OBJECTIVE

To establish a deep learning algorithm that can accurately determine three-dimensional facial anatomical landmarks, multi-view stacked hourglass convolutional neural networks (MSH-CNN) and to construct three-dimensional facial midsagittal plane automatically based on MSH-CNN and weighted Procrustes analysis algorithm.

METHODS

One hundred subjects with no obvious facial deformity were collected in our oral clinic. Three-dimensional facial data were scanned by three-dimensional facial scanner. Experts annotated twenty-one facial landmarks and midsagittal plane of each data. Eighty three-dimensional facial data were used as training set, to train the MSH-CNN in this study. The overview of MSH-CNN network architecture contained multi-view rendering and training the MSH-CNN network. The three-dimensional facial data were rendered from ninety-six views that were fed to MSH-CNN and the output was one heatmap per landmark. The result of the twenty-one landmarks was accurately placed on the three-dimensional facial data after a three-dimensional view ray voting process. The remaining twenty three-dimensional facial data were used as test set. The trained MSH-CNN automatically determined twenty-one three-dimensional facial anatomical landmarks of each case of data, and calculated the distance between each MSH-CNN landmark and the expert landmark, which was defined as position error. The midsagittal plane of the twenty subjects' could be automatically constructed, using the MSH-CNN and Procrustes analysis algorithm. To evaluate the effect of midsagittal plane by automatic method, the angle between the midsagittal plane constructed by the automatic method and the expert annotated plane was calculated, which was defined as angle error.

RESULTS

For twenty subjects with no obvious facial deformity, the average angle error of the midsagittal plane constructed by MSH-CNN and weighted Procrustes analysis algorithm was 0.73°±0.50°, in which the average position error of the twenty-one facial landmarks automatically determined by MSH-CNN was (1.13±0.24) mm, the maximum position error of the orbital area was (1.31±0.54) mm, and the minimum position error of the nasal area was (0.79±0.36) mm.

CONCLUSION

This research combines deep learning algorithms and Procrustes analysis algorithms to realize the fully automated construction of the three-dimensional midsagittal plane, which initially achieves the construction effect of clinical experts. The obtained results constituted the basis for the independent intellectual property software development.

The Efficacy of a New AMCOP® Elastodontic Protocol for Orthodontic Interceptive Treatment: A Case Series and Literature Overview

BACKGROUND

Elastodontics is a specific interceptive orthodontic treatment that uses removable elastomeric appliances. They are functional appliances that produce neuromuscular, orthopedic and dental effects. Thus, these devices are useful in the developmental age, when skeletal structures are characterized by important plasticity and adaptation capacity, allowing to remove factors responsible for malocclusions. Elastomeric devices are generally well tolerated by patients requiring simple collaboration and management. This work can be useful to update all orthodontists already adopting these appliances or for those who want to approach them for the first time. This study aimed to describe four cases treated with new elastomeric devices called AMCOP Bio-Activators and to provide an overview of elastodontics, its evolution, indications and limits.

METHODS

A total of four clinical cases were presented after a treatment period of 16-20 months to evaluate the clinical and radiological effects of the elastodontic therapy.

RESULTS

The effectiveness of Bio-Activators on clinical cases was evidenced with a significant improvement in skeletal and dentoalveolar relationship, and malocclusion correction in a limited treatment period (16-20 months).

CONCLUSIONS

The Bio-Activators showed clinical effectiveness to achieve therapeutic targets according to a low impact on the patient's compliance.

Effect of Craniofacial Morphology on Pharyngeal Airway Volume Measured Using Cone-Beam Computed Tomography (CBCT)-A Retrospective Pilot Study

Background: The present study aimed to determine the correlation between pharyngeal airway volume and craniofacial morphology through cone-beam computed tomography (CBCT). Additionally, the study analyzed the influence of gender on pharyngeal airway volume. (2) Methods: 80 CBCT scans of 40 male and 40 female patients (mean age: 15.38 + 1.10 years) fulfilling the eligibility criteria were included. CBCT scans were evaluated for pharyngeal airway volume using the In Vivo Dental 5.1 software. Additionally, CBCT-derived lateral cephalograms were used to assess various craniofacial morphology parameters. To examine the influences of gender on airway volume, T-test was carried out. Correlation between airway volume and craniofacial parameters were measured using Pearson correlation followed by regression analysis. The value of p < 0.05 was considered statistically significant. Results: The mean airway volume was significantly greater in males than in females. A statistically significant negative correlation was found between maxillary plane inclination and pharyngeal airway volume. In contrast, a positive correlation was observed between mandibular length and lower molar inclination with oropharyngeal and total pharyngeal airway volume. Females showed a statistically significant positive correlation between the pharyngeal airway volume and sagittal position of maxilla and mandible; they also showed a negative correlation between oropharyngeal airway volume and the mandibular plane angle. Conclusions: Overall, the pharyngeal airway space differs significantly between males and females. Craniofacial morphology does have a significant effect on the pharyngeal airway, especially on the oropharyngeal airway volume.

Radiographic Assessment of Pediatric Condylar Fractures after Conservative Treatment with Functional Appliances-A Systematic Review

Background: To evaluate the effectiveness of conservative treatment with functional appliances for condylar fractures in pediatric age. Methods: Four electronic databases (PubMed, EBSCO, Scopus, and Web of Science) were consulted with no restriction of publication status or year, up to 31 August 2020. Selection criteria: based on the PICOS criteria, the selection criteria were set for observational human studies, with at least 10 patients and six months of follow-up. The study population included pediatric patients (aged 5–16 years), with unilateral or bilateral condylar fracture, treated with functional appliances. Condylar remodeling and mandibular growth were analyzed through sequential radiographic examinations. Data collection and analysis: Two independent reviewers carried out title-abstract screening, and a senior investigator was involved to solve any disagreement. The quality of the evidence was assessed through the Canada Institute of Health Economics (IHE) quality appraisal checklist, and the National Institutes of Health (NIH) quality assessment tool. Results: A total of 971 articles were retrieved from the electronic search; among them, three studies met the eligibility criteria. A moderate risk of bias was detected in all the studies, due to common limitations (absence of multicenter studies, prospective design, blindness of the investigators, patients’ drop-out). At follow-up examinations (between 6 months and 4.9 years), the difference of condylar neck length between the “injured” and “healthy” side was approximately 2 mm, while the anteroposterior condylar width discrepancy was recorded up to 1 mm. Conclusions: Short- and long-term data revealed that conservative treatment with functional appliances led to partial or full radiological recovery of the joint morphology, along with good to excellent functional results. Patients’ age has a crucial role on the treatment choice, and the type of fracture (presence of condylar displacement, or dislocation) is also a major prognostic indicator of the radiologic outcome. Limitation: To confirm the effectiveness of functional appliances, more prospective clinical long-term follow-up studies with homogeneous samples of condylar fractures are deemed necessary. Registration: The study protocol was registered on PROSPERO (CRD42020205650).

Indication of clear aligners in the early treatment of anterior crossbite: a case series

Introduction:

Anterior crossbite (AC) is defined as a reverse sagittal relationship between maxillary and mandibular incisors. According to an evidence-based orthodontic triage, the treatment need of AC is indicated if any occlusal interference is forcing the mandible towards a Class III growth pattern. Removable and fixed appliances have been suggested to correct AC.

Objective:

The present report aims at presenting the benefits of an alternative therapy for the early treatment of anterior crossbite using clear aligners.

Methods:

Two cases of anterior crossbite corrected using clear aligners in 8-years-old children are presented.

Results:

In both cases, AC was successfully corrected within 5 months. At the end of the treatment, overjet and overbite were corrected. No major discomfort or speech impairment was noticed by the parents.

Conclusions:

Due to the perceived shortcomings of alternative approaches, the use of clear aligners for correcting AC in mixed dentition should be considered as a comfortable and well tolerated appliance for young patients.

Integration of Cranial Base and Face in Growing Subject

Background: many papers investigate the role of the cranial base in facial development, but the results are not in agreement. This can be due to a difference between the central and lateral parts of the cranial base. The aim of the present study is to evaluate the relationship between the central and the lateral cranial base and the facial skeleton in pre-pubertal peak subjects and at the end of growth. Material/Methods: a total sample of 52 latero-lateral cranial teleradiographs were analyzed. To test the correlation between structures, the “Partial Least Square” analysis was performed. Geometric morphometric analysis were applied and partial least square analysis was used to test correlation. Integration was studied removing the effect of allometry. Results: facial skeleton has no significant relation with central cranial base. Facial skeleton has significant relationships with the lateral portion of the cranial base. This relationship is higher in the post-peak phase of growth. Conclusion: the Integration between facial structures and cranial base is significant. The Spatial orientation and shape of the facial structures are both influenced by cranial base. This is mainly due to the lateral portion of cranial base.

Lower Arch Dimensions in Children with Anterior Open Bite and Normal Vertical Overbite: A Cross-sectional Study

Aim

Dental arch is a dynamic structure and its size depends on genetic and environmental factors. The aim of this study was to determine lower arch dimensions in children between 8 and 16 years with anterior open bite (AOB) and normal vertical overbite (NVO).

Materials and Methods

A cross-sectional study was performed in 132 individuals with AOB and 132 with NVO between 8 and 16 years selected from public schools. Intercanine width, arch length, intermolar and interpremolar distances, and arch perimeter of the lower arch were measured in previously digitalized models using the GOM inspection program and an optical three-dimensional scanner.

Results

Individuals with NVO presented smaller lower arch size with statistical differences in intercanine (P = 0.024, 95% confidence interval [CI]: 0.01, 0.02) and intermolar (P = 0.000, 95% CI: -1.76, -0.53) width and nonsignificant differences in the arch perimeter (P = 0.239, 95% CI: -1.57, 0.39) according to Mann-Whitney U-test.

Conclusion

Individuals between 8 and 16 years of age with NVO showed smaller lower dental arch than individuals with AOB in most dimensions.

Custom made onlay implants in peek in maxillofacial surgery: a volumetric study

PURPOSE

Facially malformed patients often present a variable degree of facial imbalance even after basal bone correction, and resolution of the residual hard- and soft-tissue deficiencies and asymmetries of the face are of great importance for achieving a satisfactory post-implant procedure result. The use of polyether ether ketone (PEEK) implants for maxillofacial reconstruction has been documented in the literature, but the number of patients who have received them is limited. The aim of this study was to evaluate the overall volumetric results in patients with facial imbalance after onlay custom implant positioning for mandible and fronto-orbital reconstructions. Analysis was performed by confronting volumes with the use of three-dimensional (3D) photogrammetry.

METHODS

Fifteen patients were eligible for PEEK implant placements, eight for mandibular angle reconstruction, and seven for fronto-orbital reconstruction. Pre- and post-surgical 3D images of each patient's face were acquired. Facial asymmetry was analyzed by comparing each face with its mirrored copy.

RESULTS

Three-dimensional analyses have shown that some degree of volume imbalance was still present in the patients with only 1.32 ± 1.02 mm residual discrepancy after treatment.

CONCLUSION

Results of the study were found to fall within clinically acceptable limits since an asymmetry rate of < 3 mm is considered to fall into the norm.

Case Reports in Pediatric Dentistry Journals: A Systematic Review about Their Effect on Impact Factor and Future Investigations

Background: The effects of publishing case reports on journal impact factor and their impact on future research in pediatric dentistry has not been clearly evaluated yet. Aim. To assess the relevance and role of case reports in pediatric dentistry. Methods: A systematic review (PROSPERO registration number: CRD42018108621) of all case reports published between 2011 and 2012 in the three major pediatric dentistry journals was performed manually. Data regarding citations of each report were acquired from the Institute for Scientific Information database available online. The authors analyzed information regarding citations (number, percentage, and mean) received by each case report and considered their relation with the 2013 journal impact factor. Results: Case reports accounted for almost sixteen per cent of all articles published between 2011 and 2012. The citation rate of case reports was generally low and the highest mean citation was 0.5. This review revealed that 6 (9.52%) case reports had at least 5 citations and that the majority of the citing articles were also case reports (27.78%) or narrative reviews (25%). Conclusions: The publication of case reports affected the journal impact factor in a negative way, this influence is closely related to the percentage of the published case reports. Case reports about innovative topics, describing rare diseases, syndromes, and pathologies were more frequently cited.

Lay People Esthetic Evaluation of Primary Surgical Repair on Three-Dimensional Images of Cleft Lip and Palate Patients

Background and Objectives: Previous literature has disclosed that facial attractiveness affects the esthetic evaluation of nose and lip deformity on frontal and lateral photographs. However, it has never been debated if the removal of the external facial features on three-dimensional (3D) models ("cropped assessment bias") could provide a considerable usefulness in the interpretation and comparison of the results. Additionally, it has been assumed on two-dimensional (2D) studies that esthetic assessment biases with respect to observer gender, and it is not acknowledged if and to the extent that "gender assessment bias" may be influenced by a three-dimensional layout. The aim of this study is to investigate if facial traits and observers' gender may affect the esthetic ratings of unilateral cleft lip and palate (UCLP) patients after soft tissue reconstruction. Materials and Methods: Three-dimensional images of ten UCLP patients' images were acquired before the intervention (T0), one-month (T1) and six-months (T2) postoperative. Geomagic^® software (version 2014; 3D Systems, Rock Hill, SC, USA) was used to remove the external facial features of 3D surface models. Five-point scale developed by Asher-McDade et al. was used to rate both nasolabial attractiveness and impairment for full-face (FF) and cropped-face (CF) 3D images. Forty-three judges (21 males, 22 females) were enrolled for the esthetic evaluation. Intraclass correlation coefficient (ICC) was used to test intra- and inter-examiner reliability; a value of 0.7 was set as the minimum acceptable level of reliability. Results: When comparing the 2 sets of observations (FF and CF), the ICC ranged from 0.654 to 0.823. Concerning gender assessment bias, the ICC ranged from 0.438 to 0.686 and from 0.722 to 0.788 for males and females, respectively. Concerning inter-examiner reliability, ICC for questions 2-7 ranged from 0.448 to 0.644 and from 0.659 to 0.817 at T0 and T2, respectively. Conclusions: The removal of external facial features provides subtle differences on the esthetic assessment of UCLP patients. Moreover, based on our data, examiners' gender differences may affect esthetic assessment of UCLP patients. Despite the subjectivity of esthetic judgments, a reliable, validated and reproducible scoring protocol should consider the influence of gender differences on 3D esthetic assessment of UCLP patients.