A Pseudo-Dynamic Delay Calculation Using Optimal Zone Segmentation for Ultra-Compact Ultrasound Imaging Systems

Synthetic radial aperture focusing to regulate manual volumetric scanning for economic transrectal ultrasound imaging

In this paper, we present a volumetric transrectal ultrasound (TRUS) imaging under the presence of radial scanning angle disorientation (SAD) in a resource-limited diagnostic setting. Herein, we test our hypothesis that a synthetic radial aperture focusing (TRUS-rSAF) technique, in which a radial plane in target volume is reconstructed by coherent compounding of multiple transmittance/reception events, will reject a randomized SAD in a free-hand scanning setup based on external angular tracking. Based on an analytical model of the TRUS-rSAF technique, we first tested specific scenarios using a clinically available TRUS transducer under different SADs in a range of normal distributions (σ = 0.1°, 0.2°, 0.5°, 1°, 2°, and 5°). We found a benefit of the TRUS-rSAF technique for higher robustness when the SAD is contained within the radial synthetic aperture window, i.e., ±0.71° from a target scanning angle. However, no enhancement was found in spatial resolution because of the limited transmit beam field of the clinical TRUS transducer, limiting the synthetic aperture window. We further evaluated the TRUS-rSAF technique with a modified TRUS transducer for an extended synthetic aperture window to test whether higher spatial resolution and robustness to SAD can be obtained in the same evaluation setup. Widening of the synthetic aperture window (±3.54°, ± 5.91°, ± 8.27°, ± 10.63°, ± 12.99°, ± 15.35°) resulted in proportional enhancements of spatial resolution, but it also progressively built up sidelobe artifacts due to randomized synthesis with limited phase cancellations. The results suggest the need for careful calibration of the TRUS-rSAF technique to enable TRUS imaging with free-hand radial scanning and external angle tracking in resource-limited settings.

A Computationally Efficient Mean Sound Speed Estimation Method Based on an Evaluation of Focusing Quality for Medical Ultrasound Imaging

Generally, ultrasound receive beamformers calculate the focusing time delays of fixed sound speeds in human tissue (e.g., 1540 m/s). However, phase distortions occur due to variations of sound speeds in soft tissues, resulting in degradation of image quality. Thus, an optimal estimation of sound speed is required in order to improve image quality. Implementation of real-time sound speed estimation is challenging due to high computational and hardware complexities. In this paper, an optimal sound speed estimation method with a low-cost hardware resource is presented. In the proposed method, the optimal mean sound speed is determined by measuring the amplitude variance of pre-beamformed radio-frequency (RF) data. The proposed method was evaluated with phantom and in vivo experiments, and implemented on Virtex-4 with Xilinx ISE 12.4 using VHDL. Experiment results indicate that the proposed method could estimate the mean optimal sound speed and enhance spatial resolution with a negligible increase in the hardware resource usage.