Complex Permittivity Measurement of High-Loss Biological Material with Improved Cavity Perturbation Method in the Range of 26.5–40 GHz

Millifluidic Nanogenerator Lab-on-a-Chip Device for Blood Electrical Conductivity Monitoring at Low Frequency

The electrical conductivity of blood is a crucial physiological parameter with diverse applications in medical diagnostics. Here, a novel approach utilizing a portable millifluidic nanogenerator lab-on-a-chip device for measuring blood conductivity at low frequencies, is introduced. The proposed device employs blood as a conductive substance within its built-in triboelectric nanogenerator system. The voltage generated by this blood-based nanogenerator device is analyzed to determine the electrical conductivity of the blood sample. The self-powering functionality of the device eliminates the need for complex embedded electronics and external electrodes. Experimental results using simulated body fluid and human blood plasma demonstrate the device's efficacy in detecting variations in conductivity related to changes in electrolyte concentrations. Furthermore, artificial intelligence models are used to analyze the generated voltage patterns and to estimate the blood electrical conductivity. The models exhibit high accuracy in predicting conductivity based solely on the device-generated voltage. The 3D-printed, disposable design of the device enhances portability and usability, providing a point-of-care solution for rapid blood conductivity assessment. A comparative analysis with traditional conductivity measurement methods highlights the advantages of the proposed device in terms of simplicity, portability, and adaptability for various applications beyond blood analysis.

Complex Permittivity Measurement of Low-Loss Anisotropic Dielectric Materials at Hundreds of Megahertz

Resonant methods are well known for their accuracy in determining the complex permittivity of materials. However, to guarantee the accuracy, interference modes must be suppressed in the measurement band. In this paper, a multi-mode split rectangular cavity is designed and fabricated to measure low-loss anisotropic dielectric materials in the frequency range from 300 to 1000 MHz. Details of the cavity design are presented. Simulation results for a uniaxially anisotropic material validate both the setup and the processing. Moreover, validation measurements on a sheet of polytetrafluoroethylene (PTFE) are in agreement with the literature data, which indicate that the proposed method in this paper is reliable and accurate for low-loss complex permittivity characterization at hundreds of megahertz.

Simple, Fast, and Accurate Broadband Complex Permittivity Characterization Algorithm: Methodology and Experimental Validation from 140 GHz up to 220 GHz

Accurate permittivity characterization has attracted a lot of attention in various areas. Resonant characterization methods are well-known for their accuracy, but they are restricted in very narrow frequency ranges, and thus, they are normally not recommended to be used for dispersive or high-loss materials. Transmission line characterization techniques are outstanding for being inexpensive, accurate, and broadband, but the algorithms are often complex to perform. This paper proposes a fast, simple, and accurate broadband permittivity characterization algorithm, which is mainly suitable for millimeter-wave applications. It combines a general line–line method and a closed-form algorithm, extracting the complex permittivity of the material under test (MUT) without the need for calculating any intermediate parameters. Validation measurements on de-ionized water in the frequency range from 140 to 220 GHz are in very good agreement with the literature data, which successfully indicates that the proposed algorithm is reliable and accurate for millimeter wave permittivity characterization.

Measuring the Complex Permittivities of Plastics in Irregular Shapes

This work presents the measurement of the complex permittivities of high density polyethylene (HDPE), linear low density polyethylene (LLDPE), low density polyethylene (LDPE), polypropylene (PP), Nylon, and thermoplastic vulcanizates (TPV) in irregular shapes at the microwave frequency. A Teflon sample holder was employed to pack irregularly shaped plastic materials with various volumetric percentages. The samples were put into a resonant cavity with an enhanced electric field in its center, which is known as the enhanced-field method (EFM). The resonant frequencies and the quality factors at different volumetric percentages were measured by a network analyzer and compared with simulated results using a full-wave simulator (high-frequency structure simulator (HFSS)). Three simulation models, layer, ring, and hybrid, are proposed and compared with the experimental results. It is found that the hybrid model (denoted as Z5R5) with five heights and five radii in the partition is the most suitable. The complex permittivities of six plastic materials were evaluated by the contour maps of the HFSS simulation using the hybrid model. The measured complex permittivities of the irregularly shaped polymers agree well with their counterparts in bulk form.

Complex Permittivity Characterization of Liquid Samples Based on a Split Ring Resonator (SRR)

A complex permittivity characterization method for liquid samples has been proposed. The measurement is carried out based on a self-designed microwave sensor with a split ring resonator (SRR), the unload resonant frequency of which is 5.05 GHz. The liquid samples in capillary are placed in the resonant zone of the fabricated senor for high sensitivity measurement. The frequency shift of 58.7 MHz is achieved when the capillary is filled with ethanol, corresponding a sensitivity of 97.46 MHz/μL. The complex permittivity of methanol, ethanol, isopropanol (IPA) and deionized water at the resonant frequency are measured and calibrated by the first order Debye model. Then, the complex permittivity of different concentrations of aqueous solutions of these materials are measured by using the calibrated sensor system. The results show that the proposed sensor has high sensitivity and accuracy in measuring the complex permittivity of liquid samples with volumes as small as 0.13 μL. It provides a useful reference for the complex permittivity characterization of small amount of liquid chemical samples. In addition, the characterization of an important biological sample (inositol) is carried out by using the proposed sensor.