Metallic Organic Framework-Derived Fe, N, S co-doped Carbon as a Robust Catalyst for the Oxygen Reduction Reaction in Microbial Fuel Cells

Iron/iron carbide coupled with S, N co-doped porous carbon as effective oxygen reduction reaction catalyst for microbial fuel cells

As a novel energy device, microbial fuel cells (MFCs) have attracted much attention for their dual functions of electricity generation and sewage treatment. However, the sluggish oxygen reduction reaction (ORR) kinetic on the cathode have hindered the practical application of MFCs. In this work, metallic organic framework derived carbon framework co-doped by Fe, S, N tri-elements was used as alternative electrocatalyst to the conventional Pt/C cathode catalyst in pH-universal electrolytes. The amount of thiosemicarbazide from 0.3 to 3 g determined the surface chemical property, and therefore the ORR activity of FeSNC catalysts. The sulfur/nitrogen doping and Fe/Fe₃C embedded in carbon shell was characterized by X-ray photoelectron spectroscopy and transmission electron microscopy. The synergy of iron salt and thiosemicarbazide contributed to the improvement of nitrogen and sulfur doping. Sulfur atoms were successfully doped into the carbon matrix and formed a certain amount of thiophene- and oxidized-sulfur. The optimal FeSNC-3 catalyst synthesized with 1.5 g of thiosemicarbazide exhibited the highest ORR activity with a positive half wave potential of 0.866 V in alkaline and 0.691 V (vs. Reversible Hydrogen Electrode) in neutral electrolyte, which both outperformed the commercial Pt/C catalyst. However, as the amount of thiosemicarbazide surpassed 1.5 g, the catalytic performance of FeSNC-4 was lowered, and this could be assigned to the decreased defects and low specific surface area. The excellent ORR performance in neutral medium urged FeSNC-3 as good cathode catalyst in single chambered MFC (SCMFC). It showed the highest maximum power density of 2126 ± 100 mW m^-2, excellent output stability of 8.14% decline in 550 h, chemical oxygen demand removal of 90.7 ± 1.6% and coulombic efficiency of 12.5 ± 1.1%, all superior to those of benchmark SCMFC-Pt/C (1637 ± 35 mW m^-2, 15.4%, 88.9 ± 0.9%, and 10.2 ± 1.1%). These outstanding results were associated to the large specific surface area and synergistic interaction of multiple active sites, like Fe/Fe₃C, Fe-N₄, pyridinic N, graphite N and thiophene-S.

2D/3D-Shaped Fe0.8Ni0.2S2/ZIF-67 as a Nanozyme for Rapid Measurement of H2O2 and Ascorbic Acid with a Low Limit of Detection

Metal-organic frameworks (MOFs) can be used as ideal artificial nanozymes for an open structure to transfer substances and products. The nanozymic mechanism of MOFs needs further investigation for wide application. In this manuscript, no peroxidase-like activity was found for ZIF-67 (a kind of MOF), however, it enhanced the peroxidase-like activity of the Fe_0.8Ni_0.2S₂/ZIF-67 composite, in which Fe_0.8Ni_0.2S₂ was the active composition. The catalytic constant (K_cat) is higher at 1.98 (for TMB) and 2.08 (for H₂O₂) times and the catalytic efficiency (K_cat/K_m) is higher at 3.13 (for TMB) and 2.67 (for H₂O₂) times, than those of Fe_0.8Ni_0.2S₂. The K_m value decreased about 85 times (for H₂O₂) for Fe_0.8Ni_0.2S₂/ZIF-67 than that of horseradish peroxidase (natural enzyme). The mechanism was proposed. The limit of detection of H₂O₂ for Fe_0.8Ni_0.2S₂/ZIF-67 is 0.039 μM, which is lower by about 18.2 times than that of Fe_0.8Ni_0.2S₂. Simultaneously, Fe_0.8Ni_0.2S₂/ZIF-67 was used to rapidly detect ascorbic acid for only 1.0 min in food monitoring. This study may be important to design a new kind of nanozyme.