How Climate Change Affects the Building Energy Consumptions Due to Cooling, Heating, and Electricity Demands of Italian Residential Sector

Improvement Options of a Social Housing Prototype in Different Climate Zones in Ecuador

Ecuador is a country with several climate zones. The zones’ characteristics are very different; however, there are social housing prototypes used in all the territories. This study constitutes the second part of the analysis of a social housing prototype in four zones (Cfb, Af, Aw, and BSh) in both the current climate situation (2020) and its projection to 2050. Improvement measures from the original dwelling block have been proposed according to the initial diagnosis, considering seven passive performance variants. A total of 56 dynamic simulations have been performed for both the current and 2050 climate scenario. The results have shown that, depending on the climate zone, improvement measures differently influence comfort ranges. In addition, the behaviour of the dwellings on the upper floor is different from those on the ground floor. This study is a starting point to show that prototype solutions of social housing should be adapted with various improvement measures and should be based on specific requirements according to their location to achieve acceptable comfort levels.

Transforming a Historic Public Office Building in the Centre of Rome into nZEB: Limits and Potentials

According to the last census of 2019, about two million Italian buildings are more than 100 years old. Building energy retrofitting involves a diverse mix of influencing factors, depending on history, intended use, and construction techniques. This paper aims to assess the energy needs of a historic building by evaluating the variability of climatic conditions and internal loads, as well as the thermal capacity of the building envelope. The energy analysis was conducted using dynamic simulation systems (TRNSYS). The purpose of the study is to provide an analysis of the current energy conditions of the building to identify the main critical issues and suggest the most suitable interventions to be implemented. All the transformations were conducted to meet the nZEB requirements and evaluate technical and economic feasibility, compatibility with architectural and landscape constraints, and large-scale replicability. Specifically, to reach the proposed targets, a 36 kWp PV system was implemented for an area of 210 m2, in addition to the Air Handling Unit (AHU) already present. The profit index is above the unit, and it yields a time range between three and four years. Therefore, fully respecting the energy performance parameters required by the Italian legislation, the study demonstrated the unattainability of the nZEB class for a listed building.

The Impact of Climate Change on Primary Air Treatment Processes and Energy Demand in Air Conditioning Systems—A Case Study from Warsaw, Poland

This article presents the impact of climate change on air treatment processes and energy demand in a selected air-conditioning system. The analysis was performed for a system supplying rooms with pre-treated primary air. Further treatment occurred directly in the rooms with individual devices such as fan coils or chilled beams. The analysis of the second stage of air treatment was not part of this study. The calculations were made for the city of Warsaw, where, according to the climate analysis for the period 1961–2020, an increase in outside temperature by 0.4 °C per decade and an increase in air humidity by 0.2 g/kg per decade were observed. The system analysis was divided into two stages. The first, including calculations made for monthly average climate data for the entire period of 1961–2020, shows changes in the energy demand of the system, resulting from progressive climate change. This analysis confirmed the general tendency of increasing demand for cooling energy and decreasing demand for heating energy, which is also observed in many other regions of the world. The second stage, based on calculations for hourly climate data in selected years, is an analysis of the operation of all elements of the system equipment. Research has identified areas that will have an increasing impact on the energy efficiency of the whole air condition system during further climate change.

The Impact Assessment of Climate Change on Building Energy Consumption in Poland

A substantial share of the building sector in global energy demand has attracted scholars to focus on the energy efficiency of the building sector. The building’s energy consumption has been projected to increase due to mass urbanization, high living comfort standards, and, more importantly, climate change. While climate change has potential impacts on the rate of energy consumption in buildings, several studies have shown that these impacts differ from one region to another. In response, this paper aimed to investigate the impact of climate change on the heating and cooling energy demands of buildings as influential variables in building energy consumption in the city of Poznan, Poland. In this sense, through the statistical downscaling method and considering the most recent Typical Meteorological Year (2004–2018) as the baseline, the future weather data for 2050 and 2080 of the city of Poznan were produced according to the HadCM3 and A2 GHG scenario. These generated files were then used to simulate the energy demands in 16 building prototypes of the ASHRAE 90.1 standard. The results indicate an average increase in cooling load and a decrease in heating load at 135% and 40%, respectively, by 2080. Due to the higher share of heating load, the total thermal load of the buildings decreased within the study period. Therefore, while the total thermal load is currently under the decrease, to avoid its rise in the future, serious measures should be taken to control the increased cooling demand and, consequently, thermal load and GHG emissions.

Smart Energy Solutions as an Indispensable Multi-Criteria Input for a Coherent Urban Planning and Building Design Process—Two Case Studies for Smart Office Buildings in Warsaw Downtown Area

The introduction of parametric tools has made a strong shift within a traditional approach to urban planning and building design, including the creation of a design awareness zone where environmental issues are concerned. This approach also uses sufficient data to be used already at the concept stage and provides initial interdisciplinary solutions. Analyses from the very initial stages allow the inclusion of smart energy choices influencing the massing, architectural features, proportions, flexibility of design, and economics. This is only a threshold; there is still a place for further development and more accurate analyses leading to the construction of buildings and urban areas with a stronger input of sustainable solutions, as existing approaches have certain limitations. This path has been followed in several research grants conducted at the Faculty of Architecture Warsaw University of Technology, and later on developed as a co-operation area with various stakeholders. Outside the general state of art, this paper will include two case studies which were provided as a concept design for prospective investors. Both locations are in the Warsaw Downtown Area, and analyses include algorithmic models dealing with the optimisation of the buildings’ forms, urban scale sun radiation levels, shadow and wind analyses indicating use of sunlight energy and wind as alternative energy sources. One of the case studies contains Pareto Front including both single- and multi-criteria optimization methods for analysing energy and economic efficiency issues, pointing out the best case solutions.

How the Italian Residential Sector Could Contribute to Load Flexibility in Demand Response Activities: A Methodology for Residential Clustering and Developing a Flexibility Strategy

This work aims at exploring the potential contribution of the Italian residential sector in implementing load flexibility for Demand Response activities. In detail, by combining experimental and statistical approaches, a method to estimate the load profile of a dwelling cluster of 751 units has been presented. To do so, 14 dwelling archetypes have been defined and the algorithm to categorise the sample units has been built. Then, once the potential flexible loads for each archetype have been evaluated, a control strategy for applying load time shifting has been implemented. That strategy accounts for both the power demand profile and the hourly electricity price. Specifically, it has been assumed that end users access a pricing mechanism following the hourly trend of electricity economic value, which is traded day by day in the Italian spot market, instead of the current Time of Use (TOU) system. In such a way, it is possible to flatten the dwellings cluster profile, limiting undesired and unexpected results on the balancing market. In the end, monthly and yearly flexibility indexes have been defined along with the strategy effectiveness parameter. From calculations, it emerges that a dwelling cluster for the Italian residential sector is characterised by a flexibility index of 10.3% and by a strategy effectiveness equal to 34%. It is noteworthy that the highest values for flexibility purpose have been registered over the heating season (winter) for the weekends.

How to Prioritize Energy Efficiency Intervention in Municipal Public Buildings to Decrease CO2 Emissions? A Case Study from Italy

The European Union 2050 climate neutrality goal and the climate crisis require coordinated efforts to reduce energy consumption in all sectors, and mainly in buildings greatly affected by the increasing temperature, with relevant CO₂ emissions due to inefficient end-use technologies. Moreover, the old building stock of most countries requires suited policies to support renovation programs aimed at improving energy performances and optimize energy uses. A toolbox was developed in the framework of the PrioritEE project to provide policy makers and technicians with a wide set of tools to support energy efficiency in Municipal Public Buildings. The toolbox, available for free, was tested in the partners’ communities, proving its effectiveness. The paper illustrates its application to the Potenza Municipality case study in which the online calculator DSTool (the core instrument of the toolbox) was utilized to select and prioritize the energy efficiency interventions in public buildings implementable in a three-year action plan in terms of costs, energy savings, CO₂ emissions’ reduction and return on investments. The results highlight that improvements in the building envelopes (walls and roofs), heating and lighting and photovoltaic systems allow reducing CO₂ emission approximately 644 t/year and saving about 2050 MWh/year with a total three-year investment of 1,728,823 EUR.

The Microclimate Design Process in Current African Development: The UEM Campus in Maputo, Mozambique

Even if current action towards sustainability in architecture mainly concerns single buildings, the responsibility of the urban shape on local microclimate has largely been ascertained. In fact, it heavily affects the energy performances of the buildings and their environmental behaviour. This produces the necessity to broaden the field of intervention toward the urban scale, involving in the process different disciplines, from architecture to fluid dynamics and physics. Following these ideas, the Masterplan for the Campus of the University Eduardo Mondlane in Maputo (Mozambique) develops a methodology that integrates microclimatic data and analyses from the initial design model. The already validated software ENVI-met (Version 4.4, ENVI_MET GmbH, Essen, Germany) acts as a useful ‘feedback’ tool that is able to assess the microclimatic behaviour of the design concept, also in terms of outdoor comfort. In particular, the analysis focused on the microclimatic performances of a ‘C’ block typology east oriented in relation to the existing buildings, in Maputo’s specific climatic characteristics. The initial urban proposal was gradually evaluated and modified in relation to the main critical aspects highlighted by the microclimatic analyses, in a sort of circular process that ended with a proposed solution ensuring better outdoor comfort than the existing buildings, and which provided an acceptable balance between spatial and climatic instances.