Synthesis and Application of Heterogeneous Catalysts Based on Heteropolyacids for 5-Hydroxymethylfurfural Production from Glucose

Combination of deep eutectic solvent and functionalized metal-organic frameworks as a green process for the production of 5-hydroxymethylfurfural and furfural from sugars

Biomass is an abundant and sustainable resource that can be converted into energy and chemicals. Therefore, the development of efficient methods for the conversion of biomass into platform intermediates is crucial. In this study, the one-pot conversion of sugars into 5-hydroxymethylfurfural (HMF) and furfural was achieved using the metal-organic framework combined with metal ions [MIL-101(Cr)] as a high-activity catalyst, and a deep eutectic solvent (choline chloride and lactic acid) as a green solvent. The optimal temperature, time, amount of catalyst used, and amount of deep eutectic solvent used were all determined. The highest HMF yield of 49.74% and furfural yield of 55.90% were obtained. The recyclability of the catalysts and deep eutectic solvent was also investigated. After three reaction runs, the HMF yield was still nearly 30.00%. Finally, the MIL-101(Cr) catalytic system was selected to study the kinetic mechanism underlying the conversion of glucose into HMF.

Sustainable Approaches to Selective Conversion of Cellulose Into 5-Hydroxymethylfurfural Promoted by Heterogeneous Acid Catalysts: A Review

5-Hydroxymethylfurfural (5-HMF) as a triply catalytic product is a value-added refining chemical in industry production. 5-HMF as biomass feedstock enables to be transformed into other high-value industrial compounds, such as 2,5-furandicarboxylic acid (FDCA), 5-hydroxymethyl-2-furancarboxylic acid (HMFCA), 5-formyl-2-furancarboxylic acid (FFCA), 2,5-diformylfuran (DFF), 2,5-bis(aminomethyl)furan (BAMF), and 2,5-dimethylfuran (DMF). Hence, catalytic conversion of biomass into 5-HMF has been given much more attention by chemists. In this review, some latest studies about the conversion of cellulose to 5-HMF have been introduced systematically. Solid acids such as heterogeneous catalysts have been widely applied in the conversion of cellulose into 5-HMF. Therefore, some novel solid acids with Brønsted and/or Lewis acidic sites, such as sulfonated solid acids, carbon-based acids, and zeolite particles employed for biomass conversions are listed.

Soluble and reusable polymer-based catalysts with Brønsted and Lewis acidity for the one-pot synthesis of hydroxymethylfurfural from glucose

One-pot synthesis of hydroxymethylfurfural from glucose using polymer-based catalysts with Brønsted and Lewis acidity.

High-throughput monitoring of biomass conversion reaction with automatic time-resolved analysis

Reactions of biomass conversions are of great importance in fine chemistry for substantial development. While numerous studies have been performed to search for functional materials to catalyze biomass conversions, a robust and high-throughput analytical method is rather limited, which may hamper further integration and automation of the reactions. Here we propose an automatic and sequential method for the investigation of glucose conversion. By combining sequential sample injection and high-speed capillary electrophoresis (HSCE) techniques, we can monitor the glucose conversion from the beginning toward the end with a good temporal resolution. The HSCE assays are performed using short capillaries (effective length of 10 cm, i.d./o.d. of 50 μm/365 μm), and the analytes are separated at an electric field of 467 V/cm and are detected by UV-absorption at 200 nm with mixed 0.2 mM CTAB, 10 mM borate, 20 mM sorbic acid (pH 12.2) as the background electrolyte. All compounds involved in the reaction, including all products (fructose, 5-hydroxymethylfurfural, formic acid and levulinic acid) and the remaining substrate glucose, are efficiently separated and simultaneously detected from just one analysis with a temporal resolution of one minute. The method exhibits high-resolution separation, a wide linear range with limit-of-detection down to μg/mL-level, as well as excellent repeatability in sequential analysis. It is indicated that the proposed method is of great value in the analysis of complicated biomass conversion and could be potentially applied in various catalytic chemical reactions.

Production of 5-Hydroxymethylfurfural from Direct Conversion of Cellulose Using Heteropolyacid/Nb2O5 as Catalyst

This study aimed to select the best reaction conditions to produce 5-hydroxymethylfurfural (HMF) from cellulose using heterogeneous catalyst based on a heteropolyacid (H3PW12O40—HPW) and Nb2O5. Initially, the influence of the temperature (160 or 200 °C), acetone:water ratio (50:50 or 75:25 v/v), cellulose load (5% or 10% w/v) and catalyst concentration (1% or 5% w/v) on HMF production from cellulose was evaluated through a Taguchi’s L16 screening experimental design. Afterwards, the main variables affecting this process, namely the temperature (160–240 °C) and acetone:water ratio (60:40–90:10 v/v), were optimized using a central composite rotatable design. Next, a kinetic study on HMF production from cellulose was carried out. Finally, HMF production from cellulose obtained from different biomass sources was evaluated. It was found that the reaction conditions able to result in maximum HMF yield, i.e., around 20%, were 200 °C, acetone:water ratio of 75:25 (v/v), 10% w/v of cellulose, and 5% w/v of catalyst concentration. The kinetic study revealed that the Langmuir–Hinshelwood–Hougen–Watson approach fit to the experimental data. Under the optimized conditions, the catalyst HPW/Nb2O5 was also effective in converting different sources of cellulose into HMF.