A Comprehensive Review on Energy Storage Systems: Types, Comparison, Current Scenario, Applications, Barriers, and Potential Solutions, Policies, and Future Prospects

Retraction: Metal-ion batteries for electric vehicles: current state of the technology, issues and future perspectives

[This retracts the article DOI: 10.1039/D1NA00214G.].

Zinc-Carbon Battery Recycling for Investigating Carbon Materials for Supercapacitor Applications

In this paper, carbon materials, including graphene nanosheets and carbon nanoparticles, were prepared from spent zinc-carbon batteries by the following two simple methods: electrochemical exfoliation and ultrasonication. Here, graphene nanosheets were synthesized by electrochemical exfoliation in 0.5 M H2SO4 by using a direct current power supply with two carbon rods from spent zinc-carbon batteries. Carbon nanoparticles were prepared by fast ultrasonication in a low-cost, green solution of DI water and ethanol. Graphene nanosheets in this study have high quality, large scale, and good electrochemical ability, while carbon nanoparticles have a unique nanosize and a good specific surface area. These carbon materials were applied for electrochemical measurements for supercapacitor studies and showed excellent stability at different temperatures. Moreover, electric double-layer capacitor devices based on graphene nanosheets and carbon nanoparticles were also used in electrochemical studies with strong stability and good electrochemical capability.

Optimization of the Ex Situ Biomethanation of Hydrogen and Carbon Dioxide in a Novel Meandering Plug Flow Reactor: Start-Up Phase and Flexible Operation

With the increasing use of renewable energy resources for the power grid, the need for long-term storage technologies, such as power-to-gas systems, is growing. Biomethanation provides the opportunity to store energy in the form of the natural gas-equivalent biomethane. This study investigates a novel plug flow reactor that employs a helical static mixer for the biological methanation of hydrogen and carbon dioxide. In tests, the reactor achieved an average methane production rate of 2.5 LCH4LR∗d (methane production [LCH4] per liter of reactor volume [LR] per day [d]) with a maximum methane content of 94%. It demonstrated good flexibilization properties, as repeated 12 h downtimes did not negatively impact the process. The genera Methanothermobacter and Methanobacterium were predominant during the initial phase, along with volatile organic acid-producing, hydrogenotrophic, and proteolytic bacteria. The average ratio of volatile organic acid to total inorganic carbon increased to 0.52 ± 0.04, while the pH remained stable at an average of pH 8.1 ± 0.25 from day 32 to 98, spanning stable and flexible operation modes. This study contributes to the development of efficient flexible biological methanation systems for sustainable energy storage and management.

Nanostructured Design Cathode Materials for Magnesium-Ion Batteries

Energy is undeniably one of the most fundamental requirements of the current generation. Solar and wind energy are sustainable and renewable energy sources; however, their unpredictability points to the development of energy storage systems (ESSs). There has been a substantial increase in the use of batteries, particularly lithium-ion batteries (LIBs), as ESSs. However, low rate capability and degradation due to electric load in long-range electric vehicles are pushing LIBs to their limits. As alternative ESSs, magnesium-ion batteries (MIBs) possess promising properties and advantages. Cathode materials play a crucial role in MIBs. In this regard, a variety of cathode materials, including Mn-based, Se-based, vanadium- and vanadium oxide-based, S-based, and Mg2+-containing cathodes, have been investigated by experimental and theoretical techniques. Results reveal that the discharge capacity, capacity retention, and cycle life of cathode materials need improvement. Nevertheless, maintaining the long-term stability of the electrode-electrolyte interface during high-voltage operation continues to be a hurdle in the execution of MIBs, despite the continuous research in this field. The current Review mainly focuses on the most recent nanostructured-design cathode materials in an attempt to draw attention to MIBs and promote the investigation of suitable cathode materials for this promising energy storage device.

A simple efficient algorithm for molecular simulations of constant potential electrodes

Increasingly, society requires high power, high energy storage devices for applications ranging from electric vehicles to buffers on the electric grid. Supercapacitors are a promising contribution to meeting these demands, though there still remain unsolved practical problems. Molecular dynamics simulations can shed light on the relevant molecular level processes in electric double layer capacitors, but these simulations are computationally very demanding. Our focus here is on the algorithmic complexity of the constant potential method (CPM), which uses dedicated electrostatics solvers to maintain a fixed potential difference between two conducting electrodes. We show how any standard electrostatics solver-capable of calculating the energies and forces on all atoms-can be used to implement CPM with a minimum of coding. As an example, we compare our generalized implementation of CPM, based on invocations of the particle-particle-particle-mesh routine of the Large-scale Atomic/Molecular Massively Parallel Simulator, with a traditional implementation based on a dedicated re-implementation of Ewald summation. Both methods yield comparable results on four test systems, with the former achieving a substantial gain in speed and improved scalability. The step from dedicated electrostatic solvers to generic routines is made possible by noting that CPM's traditional narrow Gaussian point-spread of atomic charges on the electrodes effectively endows point-like atoms with chemical hardness, i.e., an intra-atomic energy quadratic in the charge.

Bifunctional electrode of bismuth tungsten for electrochemical sensing applications

A co-precipitation technique has been used to prepare Bismuth tungstate nanoparticles (Bi₂WO₆) for electrochemical capacitors and electrochemical sensing of Ascorbic acid (AA). Using a scanning rate of 10 mV s ^-1, the electrode was performed as the pseudocapacitance behavior and the specific capacitance to be up to 677 Fg ^-1 at 1 A/g. Bi₂WO₆ versus Glassy carbon electrode (GCE) was also used to study the behavior of the Bi₂WO₆ modified electrodes in detecting ascorbic acid. This electrochemical sensor shows excellent electrocatalytic performance when ascorbic acid is present, as determined by differential pulse voltammetry. In solution, ascorbic acid diffuses to an electrode surface and controls its surface properties. Based on the results from the investigation, the sensor showed a detection sensitivity of 0.26 mM/mA, and a limit of detection (LOD) of 77.85 mM. It is clear from these results that Bi₂WO₆ may find application as an electrode material for supercapacitors and glucose sensors.

Morphology and Photocatalytic Activity of Zinc Oxide Reinforced Polymer Composites: A Mini Review

There is an approximately 3% of fresh water available globally for utilization, while the rest of the water is not available for usage, leaving billions of people with less water. Less water availability means that the majority of water consists of pollutants either in ground water or drinking water, which in turn may have a negative impact on the environment and people. Various methods such as plasma technology, flocculation, neutralization, and disinfection have been utilized for wastewater treatment. The wastewater treatment methods have been found to be selective in terms of the removal of other pollutants, as a result, the majority of them are unable to remove pollutants such as antibiotics at a trace level. In order to ensure that there is a complete removal of pollutants from water, there is a need for the development of alternative wastewater treatment methods. The use of solar light by photocatalysis is an alternative method for the degradation of toxic pollutants. Different photocatalysts such as zinc oxide (ZnO), titanium dioxide (TiO2), and silver (Ag) have been used in the process of photocatalysis. However, the above photocatalysts were found to have drawbacks such as agglomeration at higher contents and health problems during transportation. To solve the above problem, the nanoparticles were immobilized in various matrices such as polymers and ceramics, with polymers being preferred because of low cost, chemical inertness, and high durability. The current review discusses various methods for the preparation of ZnO and its synergy with other nanoparticles incorporated in various polymer matrices. Because it is known that the preparation method(s) affects the morphology, the morphology and the photocatalytic activity of various ZnO/polymer composites and hybrid systems of ZnO/other nanoparticles/polymer composites are discussed in depth.

Green Recycling Methods to Treat Lithium-Ion Batteries E-Waste: A Circular Approach to Sustainability

E-waste generated from end-of-life spent lithium-ion batteries (LIBs) is increasing at a rapid rate owing to the increasing consumption of these batteries in portable electronics, electric vehicles, and renewable energy storage worldwide. On the one hand, landfilling and incinerating LIBs e-waste poses environmental and safety concerns owing to their constituent materials. On the other hand, scarcity of metal resources used in manufacturing LIBs and potential value creation through the recovery of these metal resources from spent LIBs has triggered increased interest in recycling spent LIBs from e-waste. State of the art recycling of spent LIBs involving pyrometallurgy and hydrometallurgy processes generates considerable unwanted environmental concerns. Hence, alternative innovative approaches toward the green recycling process of spent LIBs are essential to tackle large volumes of spent LIBs in an environmentally friendly way. Such evolving techniques for spent LIBs recycling based on green approaches, including bioleaching, waste for waste approach, and electrodeposition, are discussed here. Furthermore, the ways to regenerate strategic metals post leaching, efficiently reprocess extracted high-value materials, and reuse them in applications including electrode materials for new LIBs. The concept of "circular economy" is highlighted through closed-loop recycling of spent LIBs achieved through green-sustainable approaches.

Recent Advances in Energy Storage Systems for Renewable Source Grid Integration: A Comprehensive Review

The reduction of greenhouse gas emissions and strengthening the security of electric energy have gained enormous momentum recently. Integrating intermittent renewable energy sources (RESs) such as PV and wind into the existing grid has increased significantly in the last decade. However, this integration hampers the reliable and stable operation of the grid by posing many operational and control challenges. Generation uncertainty, voltage and angular stability, power quality issues, reactive power support and fault ride-through capability are some of the various challenges. The power generated from RESs fluctuates due to unpredictable weather conditions such as wind speed and sunshine. Energy storage systems (ESSs) play a vital role in mitigating the fluctuation by storing the excess generated power and then making it accessible on demand. This paper presents a review of energy storage systems covering several aspects including their main applications for grid integration, the type of storage technology and the power converters used to operate some of the energy storage technologies. This comprehensive review of energy storage systems will guide power utilities; the researchers select the best and the most recent energy storage device based on their effectiveness and economic feasibility.

Mixed-Integer Linear Programming Model to Assess Lithium-Ion Battery Degradation Cost

This work proposes a mixed-integer linear programming model for the operational cost function of lithium-ion batteries that should be applied in a microgrid centralized controller. Such a controller aims to supply loads while optimizing the leveled cost of energy, and for that, the cost function of the battery must compete with the cost functions of other energy resources, such as distribution network, dispatchable generators, and renewable sources. In this paper, in order to consider the battery lifetime degradation, the proposed operational cost model is based on the variation in its state of health (SOH). This variation is determined by experimental data that relate the number of charge and discharge cycles to some of the most important factors that degrade the lifespan of lithium-ion batteries, resulting in a simple empirical model that depends on the battery dispatch power and the current state of charge (SOC). As proof-of-concept, hardware-in-the-loop (HIL) simulations of a real microgrid are performed considering a centralized controller with the proposed battery degradation cost function model. The obtained results demonstrate that the proposed cost model properly maintains the charging/discharging rates and the SOC at adequate levels, avoiding accelerating the battery degradation with use. For the different scenarios analyzed, the battery is only dispatched to avoid excess demand charges and to absorb extra power produced by the non-dispatchable resources, while the daily average SOC ranges from 48.86% to 65.87% and the final SOC converges to a value close to 50%, regardless of the initial SOC considered.

Electrochemical Cells and Storage Technologies to Increase Renewable Energy Share in Cold Climate Conditions—A Critical Assessment

The energy efficiency of a renewable energy system is inextricably linked to the energy storage technologies used in conjunction with it. The most extensively utilized energy storage technology for all purposes is electrochemical storage batteries, which have grown more popular over time because of their extended life, high working voltage, and low self-discharge rate. However, these batteries cannot withstand the very low temperatures encountered in cold regions, even with these very promising technical characteristics. The cold northern temperatures affect the batteries’ electromotive force and thus decrease their storage capacity. In addition, they affect the conductivity of the electrolyte and the kinetics of electrochemical reactions, thus influencing the capacity and speed of electrons in the electrolyte. In this article, which is intended as a literature review, we first describe the technical characteristics of charge–discharge rate of different electrochemical storage techniques and their variations with temperature. Then, new approaches used to adapt these electrochemical storage techniques to cold climates are presented. We also conduct a comparative study between the different electrochemical storage techniques regarding their performance in the harsh climatic conditions of the Canadian North.

Replacement of Cobalt in Lithium-Rich Layered Oxides by n-Doping: A DFT Study

The replacement of cobalt in the lattice of lithium-rich layered oxides (LRLO) is mandatory to improve their environmental benignity and reduce costs. In this study, we analyze the impact of the cobalt removal from the trigonal LRLO lattice on the structural, thermodynamic, and electronic properties of this material through density functional theory calculations. To mimic disorder in the transition metal layers, we exploited the special quasi-random structure approach on selected supercells. The cobalt removal was modeled by the simultaneous substitution with Mn/Ni, thus leading to a p-doping in the lattice. Our results show that cobalt removal induces (a) larger cell volumes, originating from expanded distances among stacked planes; (b) a parallel increase of the layer buckling; (c) an increase of the electronic disorder and of the concentration of Jahn–Teller defects; and (d) an increase of the thermodynamic stability of the phase. Overall p-doping appears as a balanced strategy to remove cobalt from LRLO without massively deteriorating the structural integrity and the electronic properties of LRLO.

Stationary Hybrid Renewable Energy Systems for Railway Electrification: A Review

This article provides an overview of modern technologies and implemented projects in the field of renewable energy systems for the electrification of railway transport. In the first part, the relevance of the use of renewable energy on the railways is discussed. Various types of power-generating systems in railway stations and platforms along the track, as well as in separate areas, are considered. The focus is on wind and solar energy conversion systems. The second part is devoted to the analysis of various types of energy storage devices used in projects for the electrification of railway transport since the energy storage system is one of the key elements in a hybrid renewable energy system. Systems with kinetic storage, electrochemical storage batteries, supercapacitors, hydrogen energy storage are considered. Particular attention is paid to technologies for accumulating and converting hydrogen into electrical energy, as well as hybrid systems that combine several types of storage devices with different ranges of charge/discharge rates. A comparative analysis of various hybrid electric power plant configurations, depending on the functions they perform in the electrification systems of railway transport, has been carried out.

Review on Energy Storage Systems in Microgrids

Energy storage systems (ESSs) are gaining a lot of interest due to the trend of increasing the use of renewable energies. This paper reviews the different ESSs in power systems, especially microgrids showing their essential role in enhancing the performance of electrical systems. Therefore, The ESSs classified into various technologies as a function of the energy storage form and the main relevant technical parameters. In this review paper, the most common classifications are presented, summarized, and compared according to their characteristics. A specific interest in electrochemical ESSs, especially battery energy storage systems, focusing on their classifications due to their importance in the residential sector. Besides that, the benefits and drawbacks of Lithium-Ion (Li-Ion) batteries are discussed due to their significance. Finally, the environmental impact of these ESSs is discussed.

Potential and Economic Analysis of Solar-to-Hydrogen Production in the Sultanate of Oman

Hydrogen production using renewable power is becoming an essential pillar for future sustainable energy sector development worldwide. The Sultanate of Oman is presently integrating renewable power generations with a large share of solar photovoltaic (PV) systems. The possibility of using the solar potential of the Sultanate can increase energy security and contribute to the development of the sustainable energy sector not only for the country but also for the international community. This study presents the hydrogen production potential using solar resources available in the Sultanate. About 15 locations throughout the Sultanate are considered to assess the hydrogen production opportunity using a solar PV system. A rank of merit order of the locations for producing hydrogen is identified. It reveals that Thumrait and Marmul are the most suitable locations, whereas Sur is the least qualified. This study also assesses the economic feasibility of hydrogen production, which shows that the levelized cost of hydrogen (LCOH) in the most suitable site, Thumrait, is 6.31 USD/kg. The LCOH in the least convenient location, Sur, is 7.32 USD/kg. Finally, a sensitivity analysis is performed to reveal the most significant influential factor affecting the future’s green hydrogen production cost. The findings indicate that green hydrogen production using solar power in the Sultanate is promising, and the LCOH is consistent with other studies worldwide.

Advantages of Applying Large-Scale Energy Storage for Load-Generation Balancing

The continuous development of energy storage (ES) technologies and their wider utilization in modern power systems are becoming more and more visible. ES is used for a variety of applications ranging from price arbitrage, voltage and frequency regulation, reserves provision, black-starting and renewable energy sources (RESs), supporting load-generation balancing. The cost of ES technologies remains high; nevertheless, future decreases are expected. As the most profitable and technically effective solutions are continuously sought, this article presents the results of the analyses which through the created unit commitment and dispatch optimization model examines the use of ES as support for load-generation balancing. The performed simulations based on various scenarios show a possibility to reduce the number of starting-up centrally dispatched generating units (CDGUs) required to satisfy the electricity demand, which results in the facilitation of load-generation balancing for transmission system operators (TSOs). The barriers that should be encountered to improving the proposed use of ES were also identified. The presented solution may be suitable for further development of renewables and, in light of strict climate and energy policies, may lead to lower utilization of large-scale power generating units required to maintain proper operation of power systems.

Economic Analysis of the Investments in Battery Energy Storage Systems: Review and Current Perspectives

Sources such as solar and wind energy are intermittent, and this is seen as a barrier to their wide utilization. The increasing grid integration of intermittent renewable energy sources generation significantly changes the scenario of distribution grid operations. Such operational challenges are minimized by the incorporation of the energy storage system, which plays an important role in improving the stability and the reliability of the grid. This study provides the review of the state-of-the-art in the literature on the economic analysis of battery energy storage systems. The paper makes evident the growing interest of batteries as energy storage systems to improve techno-economic viability of renewable energy systems; provides a comprehensive overview of key methodological possibilities for researchers interested in economic analysis of battery energy storage systems; indicates the need to use adequate economic indicators for investment decisions; and identifies key research topics of the analyzed literature: (i) photovoltaic systems with battery energy storage systems for residential areas, (ii) comparison between energy storage technologies, (iii) power quality improvement. The last key contribution is the proposed research agenda.

A Review of Control Techniques in Photovoltaic Systems

Complex control structures are required for the operation of photovoltaic electrical energy systems. In this paper, a general review of the controllers used for photovoltaic systems is presented. This review is based on the most recent papers presented in the literature. The control architectures considered are complex hybrid systems that combine classical and modern techniques, such as artificial intelligence and statistical models. The main contribution of this paper is the synthesis of a generalized control structure and the identification of the latest trends. The main findings are summarized in the development of increasingly robust controllers for operation with improved efficiency, power quality, stability, safety, and economics.

Resonant Energy Carrier Base Active Charge-Balancing Algorithm

This paper presents a single LC tank base cell-to-cell active voltage balancing algorithm for Li-ion batteries in electric vehicle (EV) applications. EV batteries face challenges in accomplishing fast balancing and high balancing efficiency with low circuit and control complexity. It addresses that LC resonant tank uses an energy carrier to transfer the voltage from an excessive voltage cell to the lowest voltage cell. The method requires 2N - 4 bidirectional MOSFET switches and a single LC resonant circuit, where N is the number of cells in the battery strings. The balancing speed is improved by allowing a short balancing path for voltage transfer and guarantees a fast balancing speed between any two cells in the battery string, and power consumption is reduced by operating all switches in zero-current switching conditions. The circuit was tested for 4400 mAh Li-ion battery cells under static, cyclic, and dynamic charging/discharging conditions. Two battery cells at the voltage 3.93 V and 3.65 V were balanced after 76 min, and the balancing efficiency is 94.8%. The result of dynamic and cyclic charging/discharging conditions shows that the balancing circuit is applicable for the energy storage devices and Li-ion battery cells for EV.

TFBN: A Cost Effective High Performance Hierarchical Interconnection Network

In order to fulfill the increasing demand for computation power to process a boundless data concurrently within a very short time or real-time in many areas such as IoT, AI, machine learning, smart grid, and big data analytics, we need exa-scale or zetta-scale computation in the near future. Thus, to have this level of computation, we need a massively parallel computer (MPC) system that shall consist of millions of nodes; and, for the interconnection of these massive numbers of nodes, conventional topologies are infeasible. Thus, a hierarchical interconnection network (HIN) is a rational way to connect huge nodes. Through this article, we are proposing a new HIN, which is a tori-connected flattened butterfly network (TFBN) for the next generation MPC system. Numerous basic modules are hierarchically interconnected as a toroidal connection, whereby the basic modules are flattened butterfly networks. We have studied the network architecture, static network performance, and static cost-effectiveness of the proposed TFBN in detail; and compared static network and cost-effectiveness performance of the TFBN to those of TTN, torus, TESH, and mesh networks. It is depicted that TFBN possesses low diameter and average distance, high arc connectivity, and temperate bisection width. It also has better cost-effectiveness and cost-performance trade-off factor compared to those of TTN, torus, TESH, and mesh networks. The only shortcoming is that the complexity of wiring of the TFBN is higher than that of those networks; this is because the basic module necessitates some extra short length link to form the flattened butterfly network. Therefore, TFBN is a high performance and cost-effective HIN, and it will be a good option for the next generation MPC system.

Grid Integration as a Strategy of Med-TSO in the Mediterranean Area in the Framework of Climate Change and Energy Transition

The paper presents a survey on the situation in terms of solutions for grid integration throughout the Mediterranean area in the framework of climate change and energy transition. The objective of the study is focused on Mediterranean region connectivity initiatives in the context of the broader vision of an interconnected European–Mediterranean (Euro–Med) power system for a future low-carbon energy system as the fundamental objective of Med-TSO, the Association of the Mediterranean Transmission System Operators (TSOs) for electricity. The analysis examines how the power grid connectivity evolves from now on to 2030, describing the progress made to date in integrating the power grids of the Mediterranean region as well as the future possibilities for a more integrated power grid covering the whole region. The research, conducted within Mediterranean Project II of Med-TSO, includes an overview on the current situation of the interconnections and the proposal for the 2030 interconnections Master Plan, coherent with the national development plans (NDPs) and shared energy scenarios for the whole region at the same horizon of 2030. It conducts an assessment of the gap between the current and the 2030 expected situation, taking into account the energy transition toward 2030 objectives resulting from the achievements of climate change pledges, local governmental policies and EU strategy for neighboring countries and Africa. The solutions survey includes technical solutions, procedures and rules to improve systems’ integration and increase regional electricity exchanges in Med-TSO countries, and is aimed at achieving a higher quality of services and better efficiency of energy supply in Med-TSO member countries in the framework of the expected energy transition. The main scope is to present solutions that will be made available due to maturity and experience in the coming decade, specifically: high voltage direct current (HVDC) transmission technologies, energy storage, sectors coupling, smart grid technologies and services, inter-TSO and transmission–distribution cooperation platforms, etc. The article presents two case studies: the island paradigm and a new cross-border interconnection project of common interest. Finally, the post-pandemic core role of TSOs, which has become more relevant than ever, is transformed into a key-enabler of energy transition towards a sustainable, resilient and innovative climate-neutral recovery.