Advanced Adsorbent Materials for Waste Energy Recovery

Environmental concerns on the use of the electrospinning technique for the production of polymeric micro/nanofibers

The production of micro and nanofibers through the electrospinning technique is a well assessed technology that finds application in a variety of fields. Indeed, the specific features of electrospun fibers, as well as the possibility to be modelled and functionalized, ensure their great versatility. In the last decades, the widespread use of electrospun fibers promoted studies related to the evaluation of both human health and environmental risks associated to their handling and exposure. However, to date, the environmental impact strictly related to the use of the manufacturing process has been barely considered. Therefore, the present work aims to assess the environmental impacts of the electrospinning technology used to produce micro and nanofibers. To this purpose, a model polymer was systematically electrospun, varying the main system, process and external parameters, that control the electrospinning technique. A simplified life cycle assessment analysis was finally used to evaluate how the fibrous morphology, closely linked to the choice of the technological parameters, intrinsically affected the environmental impacts.

Special Issue on Advanced Materials and Nanotechnology for Sustainable Energy and Environmental Applications

Materials play a very important role in the technological development of a society, greatly impacting people’s daily lives [...]

Investigation on the Suitability of Engelhard Titanium Silicate as a Support for Ni-Catalysts in the Methanation Reaction

Methanation reaction of carbon dioxide is currently envisaged as a facile solution for the storage and transportation of low-grade energies, contributing at the same time to the mitigation of CO2 emissions. In this work, a nickel catalyst impregnated onto a new support, Engelhard Titanium Silicates (ETS), is proposed, and its catalytic performance was tested toward the CO2 methanation reaction. Two types of ETS material were investigated, ETS-4 and ETS-10, that differ from each other in the titanium content, with Si/Ti around 2 and 3% by weight, respectively. Catalysts, loaded with 5% of nickel, were tested in the CO2 methanation reaction in the temperature range of 300–500 °C and were characterized by XRD, SEM–EDX, N2 adsorption–desorption and H2-TPR. Results showed an interesting catalytic activity of the Ni/ETS catalysts. Particularly, the best catalytic performances are showed by Ni/ETS-10: 68% CO2 conversion and 98% CH4 selectivity at T = 400 °C. The comparison of catalytic performance of Ni/ETS-10 with those obtained by other Ni-zeolites catalysts confirms that Ni/ETS-10 catalyst is a promising one for the CO2 methanation reaction.

Focus on Materials for Sulfur-Resistant Catalysts in the Reforming of Biofuels

The reforming of biofuels represents a promising technology for low carbon and renewable hydrogen production today. The core of the process is an active and stable catalyst, which can help to improve this technology and its efficiency. With this review, we aim to survey the more relevant literature on heterogeneous catalysts for the reforming of biofuels with improved sulfur tolerance. The review is structured into four main sections. Following the introduction, the fundamental aspects of sulfur poisoning are discussed. In the third section, the basic principles of the reforming of biofuels are reported, and finally, in the fourth section—the core of the review—recent progresses in the development of sulfur resistant catalysts are discussed, distinguishing the role of the metal (noble and non-noble) from that of the support.

Electrospun Nanofibers and Electrochemical Techniques for the Detection of Heavy Metal Ions

Contamination by heavy metals is currently one of the most environmental concerns especially due to the toxicity, pervasiveness, and persistence of these substances. As they are not biodegradable, heavy metals are harmful not only for water, air, and soil but also for human health, even in very low traces. There is therefore a pressing need to develop an efficient, economic, and rapid analysis method to be applied in a wide range of conditions and able to detect very low contaminants concentrations. Currently, the most novel solution in this field is represented by the combination of electrospun nanofibers and highly sensitive electrochemical techniques. It has been proved that nanofibers, due to their outstanding properties, perfectly fit as sensing material when trace concentrations of heavy metals were investigated by anodic stripping voltammetry, envisaged as the most sensitive electrochemical technique for this kind of measurements. This work aims to provide an overview of the latest trends in the detection of contaminants by the simultaneous use of electrospun fibers and anodic stripping voltammetry. Indeed, a clear and comprehensive vision of the current status of this research may drive future improvements and new challenges.

Self Standing Mats of Blended Polyaniline Produced by Electrospinning

Conducting nanofibers of polyaniline (PANI) doped with camphor-10-sulfonic acid (HCSA) and blended with different polymers, such as polymethyl methacrylate (PMMA) and polyvinyl acetate (PVAc), have been fabricated using the electrospinning technique. Scanning electron microscopy (SEM) and thermal gravimetric analysis (TGA) were utilized to characterize the morphology and the thermal stability of PANI-blended fibers. An extensive study was performed to understand the copolymer influence on both the structural and surface properties of the realized conductive thin films. Samples main electrical characteristics, as conductivity, specific capacitance and electrochemical performances were tested. The better mats were obtained with the use of PVAc copolymer, which showed a conductivity value two orders of magnitude higher than the PMMA system. Aiming at further improving the electrochemical features of these blended mats, hybrid fibers based on PANI/PVAc/graphene oxide and PANI/PVAc/iron oxide were also produced and characterized. The obtained mats were potentially addressed to numerous practical fields, including sensors, health applications, smart devices and multifunctional textile materials.