Research on the Possible Application of Polyolefin Waste-Derived Pyrolysis Oils for ANFO Manufacturing

Assessment of the impact of the comminution of property modifiers - plastics used in ANFO, on the energy parameters of the high-energy materials

Plastics are an important usable energy resource. The energy stored in them can be used as fuel in modified high-energy materials. Such use makes it possible to simultaneously dispose of waste plastics and improve the energy properties of modified explosives. The simplest material that is used for this purpose is ammonium nitrate fuel oil (ANFO)-commonly used in rock mining. Tests carried out in the Trauzl lead block test assessing the strength of explosive have shown that, with the right amount of certain polymers, similar or even better properties-energy performance-can be achieved by replacing the fuel oil in ANFO. In turn, tests conducted on the impact of plastic comminution on the assessment of the strength of high-energy material showed that a 1.0% addition of polypropylene, polyethylene or polyurethane significantly increases the strength with reference to ANFO. The test results are of practical importance and, for a more complete assessment of the suitability of polymers for use, it will be advisable to conduct further studies of the properties of high-energy materials with selected plastics.

Cu-Containing Faujasite-Type Zeolite as an Additive in Eco-Friendly Energetic Materials

Regarding the current state of the art on the utilization of zeolites in industry, the application of zeolites as an additive to eco-friendly energetic materials indicates the innovative character of the present research. One of the most commonly used energetic materials in the mining industry (engineering works) is ANFO (ammonium nitrate fuel oil), due to its easy and cheap production procedure as well as its good energetic properties and vast possibilities for modification. In the present research, we investigated Cu-zeolite with a faujasite structure (Cu-FAU) as a modifier of ANFO-based energetic materials. Analysis of the results obtained from thermodynamic calculations of energetic performance led to the conclusion that the application of Cu-faujasite as an additive to ANFO resulted in a relevant reduction in the total emission of post-decomposition fumes, with simultaneous enhancement of the energetic properties of the energetic material, which corresponded with the changes in the status of the surface and the reduced thermal effect accompanying the ammonium nitrate's decomposition. From analysis of both the energetic performance and fumes, it may be concluded that our eco-friendly and enhanced energetic material can be used as a low-emission source of energy for the quarrying of raw materials.

Variously Prepared Zeolite Y as a Modifier of ANFO

In the presented research, we investigated Ammonium Nitrate Fuel Oil (ANFO), with the addition of variously modified zeolite Y as an attractive explosive. Analysis of both blasting tests and thermodynamic models of blasting properties led to the conclusion that the addition of zeolite Y enhanced the detonation properties of such prepared ANFO via the growth of the detonation pressure, temperature, compression energy, and heat of the explosion. Generally, the modification of ANFO with variously prepared zeolite Y also reduced the volume of (CO_x + NO_x) post-blast fumes. Furthermore, it was found that the ANFO's velocity of detonation (VOD) could be controlled by the choice of the way of zeolite Y modification. Namely, for zeolite Y without Mg, as well as Mg-Y prepared via the impregnation method, the VOD rose. The opposite effect was observed when ANFO was modified with Mg-Y, obtained from the deposition of Mg over zeolite Y via the ultrasonic-assisted procedure.

Self-Acting Formation of an ANFO Similar Type of Explosive under Fire Conditions: A Case Study

On 2 October 2003 in Saint-Romain-en-Jarez (France) a fire in a farm building triggered an explosion in which 26 people were injured. Police investigation, based solely on an analysis of the effects and on general engineering knowledge, showed that the explosion was caused by an uncontrollably generated mixture of ammonium nitrate (AN) and molten plastic crates which formed an explosive mixture similar to ammonium nitrate fuel oil (ANFO). This is the only commonly known example of an ammonium nitrate blast taking place at its end user destination. Is such an explanation of the incident plausible and could a similar blast possibly happen anywhere else? The experimental results support this thesis of French investigators but raise further doubts. Laboratory reconstruction of the self-acting process of generating the explosive material confirmed the investigators’ report. However, other materials at the incident site could have influenced the final outcome too. The lab-recreated explosion of a mixture of AN and molten plastic partially confirmed the report’s thesis.

Improving ANFO: Effect of Additives and Ammonium Nitrate Morphology on Detonation Parameters

Ammonium nitrate–fuel oil (ANFO) is one of the most widely used explosives for civilian purposes. Its main advantages are its low price and simple method of production. The main disadvantages of this material are low water resistance and problems related to non-ideal detonation, which can be a potential hazard when using ANFO. Due to this, research has been conducted for many years to find suitable additives for ANFO that would have the effect of offsetting its drawbacks. The aim of this review was to describe factors affecting the energetic properties of ANFO, including the highlighting of substances that could potentially be additives to ANFO formulations that would reduce the negative effects of non-ideal detonation, while avoiding adversely impacting the effectiveness of the explosive in blasting operations, as well as its sensitivity parameters.