Spectacular Enhancement of the Thermal and Photochemical Stability of MAPbI3 Perovskite Films Using Functionalized Tetraazaadamantane as a Molecular Modifier

Enhancing Photostability of Complex Lead Halides through Modification with Antibacterial Drug Octenidine

The high power-conversion efficiencies of hybrid perovskite solar cells encourage many researchers. However, their limited photostability represents a serious obstacle to the commercialization of this promising technology. Herein, we present an efficient method for improving the intrinsic photostability of a series of commonly used perovskite material formulations such as MAPbI3, FAPbI3, Cs0.12FA0.88PbI3, and Cs0.10MA0.15FA0.75PbI3 through modification with octenidine dihydroiodide (OctI2), which is a widely used antibacterial drug with two substituted pyridyl groups and two cationic centers in its molecular framework. The most impressive stabilizing effects were observed in the case of FAPbI3 and Cs0.12FA0.88PbI3 absorbers that were manifested in significant suppression or even blocking of the undesirable perovskite films' recrystallization and other decomposition pathways upon continuous 110 mW/cm2 light exposure. The achieved material photostability-within 9000 h for the Oct(FA)n-1PbnI3n+1 (n = 40-400) and 20,000 h for Oct(Cs0.12FA0.88)n-1PbnI3n+1 (where n = 40-400) formulations-matches the highest values ever reported for complex lead halides. It is important to note that the stabilizing effect is maintained when OctI2 is used only as a perovskite surface-modifying agent. Using a two-cation perovskite composition as an example, we showed that the performances of the solar cells based on the developed Oct(Cs0.12FA0.88)399Pb400I1201 absorber material are comparable to that of the reference devices based on the unmodified perovskite composition. These findings indicate a great potential of the proposed approach in the design of new highly photostable and efficient light absorbers. We believe that the results of this study will also help to establish important guidelines for the rational material design to improve the operational stability of perovskite solar cells.

Direct Nanoscale Visualization of the Electric-Field-Induced Aging Dynamics of MAPbI3 Thin Films

Perovskite solar cells represent the most attractive emerging photovoltaic technology, but their practical implementation is limited by solar cell devices' low levels of operational stability. The electric field represents one of the key stress factors leading to the fast degradation of perovskite solar cells. To mitigate this issue, one must gain a deep mechanistic understanding of the perovskite aging pathways associated with the action of the electric field. Since degradation processes are spatially heterogeneous, the behaviors of perovskite films under an applied electric field should be visualized with nanoscale resolution. Herein, we report a direct nanoscale visualization of methylammonium (MA⁺) cation dynamics in methylammonium lead iodide (MAPbI₃) films during field-induced degradation, using infrared scattering-type scanning near-field microscopy (IR s-SNOM). The obtained data reveal that the major aging pathways are related to the anodic oxidation of I^- and the cathodic reduction of MA⁺, which finally result in the depletion of organic species in the channel of the device and the formation of Pb. This conclusion was supported by a set of complementary techniques such as time-of-flight secondary ion mass spectrometry (ToF-SIMS), photoluminescence (PL) microscopy, scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) microanalysis. The obtained results demonstrate that IR s-SNOM represents a powerful technique for studying the spatially resolved field-induced degradation dynamics of hybrid perovskite absorbers and the identification of more promising materials resistant to the electric field.

1,4,6,10-Tetraazaadamantanes (TAADs) with N-amino groups: synthesis and formation of boron chelates and host–guest complexes

A synthetic route to 1,4,6,10-tetraazaadamantanes (TAADs) bearing free and protected amino groups at the bridge N-atoms has been developed via intramolecular cyclotrimerization of C=N units in the corresponding tris(hydrazonoalkyl)amines. In a similar fashion, unsymmetrically substituted TAADs having both amino and hydroxy groups at the bridge N-atoms were prepared via a hitherto unknown co-trimerization of oxime and hydrazone groups. The use of N-TAAD derivatives as potential ligands and receptors was showcased through forming boron chelates and host–guest complexes with water and simple alcohols.

Superior hydrophobic silica-coated quantum dot for stable optical performance in humid environments

Quantum dot (QD) features many exceptional optical performances but is also vulnerable to moisture which results in structural damage and luminescent decrease. This work provided and fabricated a novel superior hydrophobic methylated core/shell silica-coated QD (MSQ) for high water stability. QD was coated with a silica shell and then surface-methylated by trimethyl silane. Mercaptopropyl trimethoxy silane, tetraethyl orthosilicate, and ethoxy trimethyl silane were utilized as the ligand exchanger, the raw material of silica, and the surface modification, respectively. Characterization results illustrated the core/shell structure of MSQ. In addition, its water contact angle was up to 159.6°. QD-, silica-coated QD(SQ)-, and MSQ-silicone were made and displayed similar absorption, emission, and excitation spectra but different water stabilities. The photoluminescence intensity and photoluminescence quantum yield of MSQ-silicone hardly changed during 15 d of water immersion, in contrast to the dramatical decrease of other two kinds of composite silicone. Specifically, the photoluminescence quantum yield decreases of MSQ-, SQ-, and QD-silicone were 1%, 40%, and 43%, respectively. Therefore, MSQ had a much better water stability. The superior hydrophobic methylated silica-coated QD has a great potential to realize the long-term working stability in a humid environment and the wider application in diverse fields.

Facile construction of the all-bridge-position-functionalized 2,4,6,8-tetraazaadamantane skeleton and conversion of its N-functionalities

An unusual protocol of a “one-pot” three-step strategy to build the 2,4,6,8-tetraazaadamantane skeleton was developed. 17 products were obtained in 19–46% yields, and the N-benzyl groups were transferred to nitroso, acetyl, benzoyl and nitro groups.

Iron(IV) Complexes with Tetraazaadamantane-based Ligands: Synthesis, Structure, Application in Dioxygen Activation and Labeling of Biomolecules

4,6,10-Trihydroxy-1,4,6,10-tetraazaadamantane (TAAD) has been shown to form a stable Fe(IV) complex having a diamantane cage structure, in which the metal center is coordinated by three oxygen atoms of the deprotonated...