Dielectric Properties of Electrical Insulating Liquids for High Voltage Electric Devices in a Time-Varying Electric Field

Critical Model Insight into Broadband Dielectric Properties of Neopentyl Glycol (NPG)

This report presents the low-frequency (LF), static, and dynamic dielectric properties of neopentyl glycol (NPG), an orientationally disordered crystal (ODIC)-forming material important for the barocaloric effect applications. High-resolution tests were carried out for 173K Collapse

Key Words

• broadband dielectric spectroscopy
• dielectric constant
• discontinuous phase transitions
• electric conductivity
• glassy dynamics
• low-frequency changes in dielectric permittivity
• neopentyl glycol
• orientationally disordered crystals
• plastic crystals

Collapse

MESH Headings Collapse

Grants

• 2022/45/B/ST5/04005 National Science Center

Collapse

Affiliation(s)

Aleksandra Drozd-Rzoska
Jakub Kalabiński
Sylwester J. Rzoska Institute of High Pressure Physics Polish Academy of Sciences, Sokołowska 29/37, 01-142 Warsaw, Poland

Collapse

The Dominance of Pretransitional Effects in Liquid Crystal-Based Nanocolloids: Nematogenic 4-methoxybenzylidene-4'-butylaniline with Transverse Permanent Dipole Moment and BaTiO3 Nanoparticles

The report presents static, low-frequency, and dynamic dielectric properties in the isotropic liquid, nematic, and solid phases of MBBA and related nanocolloids with paraelectric BaTiO3 nanoparticles (spherical, d = 50 nm). MBBA (4-methoxybenzylidene-4'-butylaniline) is a liquid crystalline compound with a permanent dipole moment transverse to the long molecular axis. The distortions-sensitive analysis of the dielectric constant revealed its hidden pretransitional anomaly, strongly influenced by the addition of nanoparticles. The evolution of the dielectric constant in the nematic phase shows the split into two regions, with the crossover coinciding with the standard melting temperature. The 'universal' exponential-type behavior of the low-frequency contribution to the real part of the dielectric permittivity is found. The critical-like pretransitional behavior in the solid phase is also evidenced. This is explained by linking the Lipovsky model to the Mossotti catastrophe concept under quasi-negative pressure conditions. The explicit preference for the 'critical-like' evolution of the apparent activation enthalpy is worth stressing for dynamics. Finally, the long-range, 'critical-like' behavior of the dissipation factor (D = tgδ), covering the isotropic liquid and nematic phases, is shown.

Frequency-Dependent Dielectric Spectroscopy of Insulating Nanofluids Based on GTL Oil during Accelerated Thermal Aging

Improving the dielectric properties of liquid-insulating materials is a current problem in research into the insulation system of a power transformer. Modern optimization of insulating liquids involves the potential use of unique synthetic esters enriched with nanoparticles. This study presents the results of the dielectric response of liquefied gas-based (GTL) insulating liquids during accelerated thermal aging. The dielectric relaxation spectroscopy method was used in the frequency domain to point out power losses as an imaginary part of a complex electric modulus. The relaxation spectra express the validity of applying this complex dielectric parameter. The polarization processes of the base oil alternately change position in the low-frequency band during thermal aging. Fullerene nanofluid undergoes three phases of dielectric loss changes during thermal aging. In the case of magnetic nanofluid, the effect of electric double-layer polarization disappeared after 500 h of thermal aging. It was found that with the gradual increase in the thermal aging time, there is no gradual increase in the dielectric losses investigated in the measured frequency spectrum. This study shows that the concentration of the two types of nanoparticles independently causes a different dielectric response to an applied AC electric field in the GTL base fluid.

Eco-Friendly Ester Fluid for Power Transformers versus Mineral Oil: Design Considerations

Mineral oil has long been used as an adequate coolant and dielectric medium in power transformer design. However, it is flammable and environmentally risky as it may be leaked or spilled. Therefore, ester fluids, which have been increasingly used in the last two decades, look promising as an ideal dielectric option. This research aims to better understand how using ester fluid insulation in power transformers impacts their physical and electrical dimensions, including their load-losses, impedance, masses, and equipment dimensions. Three case studies were carried out in a Portuguese electrical equipment manufacturer’s facility, with varying electrical parameters and physical properties of the mineral oil and ester-filled power transformers. The main results enhanced the known good electrical behavior of ester fluids, namely creating a lower electric field around winding wedges, yet the use of ester fluids led to higher load-losses, larger masses, additional radiators and, consequently, higher manufacturing costs. Nevertheless, the contribution of ester-filled power transformers to the improved environmental safety (reducing spillage and fire risks), among other advantages, makes ester fluids a truly eco-friendly option for power transformer design.

Influence of Nanoparticles on the Dielectric Response of a Single Component Resin Based on Polyesterimide

The influence of various types of nanoparticle fillers with the same diameter of 20 nm were separately incorporated into a single component impregnating resin based on a polyesterimide (PEI) matrix and its subsequent changes in complex relative permittivity were studied. In this paper, nanoparticles of Al2O3 and ZnO were dispersed into PEI (with 0.5 and 1 wt.%) to prepare nanocomposite polymer. Dielectric frequency spectroscopy was used to measure the dependence of the real and imaginary parts of complex relative permittivity within the frequency range of 1 mHz to 1 MHz at a temperature range from +20 °C to +120 °C. The presence of weight concentration of nanoparticles in the PEI resin has an impact on the segmental dynamics of the polymer chain and changed the charge distribution in the given system. The changes detected in the 1H NMR spectra confirm that dispersed nanoparticles in PEI lead to the formation of loose structures, which results in higher polymer chain mobility. A shift of the local relaxation peaks, corresponding to the α-relaxation process, and higher mobility of the polymer chains in the spectra of imaginary permittivity of the investigated nanocomposites was observed.

Determination of Dielectric Losses in a Power Transformer

The article presents a method of determining dielectric losses that occur in insulating materials in a power transformer. These losses depend mainly on the electric field stress, pulsation, dielectric loss coefficient, and electrical permittivity of insulating materials. These losses were determined by integrating an expression describing unit losses. The determined dielectric losses were compared with the total losses of the transformer. It turned out that dielectric losses are a fraction of a percent of the total losses. The influence of the electrical permittivity of the insulating liquid and paper insulation on the value of dielectric losses was investigated. This influence was ambiguous, which is characteristic of stratified systems made of materials with different permittivity. An analysis of the influence of the dielectric loss coefficient tan(delta) on the value of dielectric losses in the transformer was carried out. The impact of this coefficient on the amount of dielectric losses turned out to be directly proportional.