A Study of the Pyrolysis Products of Kraft Lignin

Investigating the Effect of Operational Variables on the Yield, Characterization, and Properties of End-of-Life Olive Stone Biomass Pyrolysis Products

In recent years, biomass has emerged as a promising raw material to produce various products, including hydrocarbons, platform chemicals, and fuels. However, a more comprehensive evaluation of the potential production of desirable value-added products and chemical intermediates is required. For these reasons, this study aimed to investigate the impact of various operating parameters on the pyrolysis of end-of-life olive stone, an agriculture and food industry waste, using a tubular quartz reactor operated at 773 K. The results revealed that the product compositions were comparable under batch or semi-batch nitrogen feeding conditions and with reaction times of 1 or 3 h. The product distribution and composition were significantly influenced by changes in the heating rate from 5 to 50 K min-1, while the effect of changing the biomass particle size from 0.3 to 5 mm was negligible in the semi-batch test. This work provides a comprehensive understanding of the relationship between pyrolysis operational parameters and obtained product distribution and composition. Moreover, the results confirmed the possible exploitation of end-of-life olive stone waste to produce high-added value compounds in the zero-waste strategy and biorefinery concept.

Evolution and Prospects in Managing Sewage Sludge Resulting from Municipal Wastewater Purification

Municipal sewage sludge is the residual material produced as a waste of municipal wastewater purification. It is a sophisticated multi-component material, hard to handle. For many years, it has been landfilled, incinerated, and widely used in agriculture practice. When unproperly discharged, it is very polluting and unhealthy. The rapidly increasing global amount of municipal sewage sludge produced annually depends on urbanization, degree of development, and lifestyle. Some diffused traditional practices were banned or became economically unfeasible or unacceptable by the communities. In contrast, it has been established that MSS contains valuable resources, which can be utilized as energy and fertilizer. The objective of the review was to prove that resource recovery is beneficially affordable using modern approaches and proper technologies and to estimate the required resources and time. The open sources of information were deeply mined, critically examined, and selected to derive the necessary information regarding each network segment, from the source to the final point, where the municipal sewage sludge is produced and disposed of. We found that developed and some developing countries are involved with ambitious and costly plans for remediation, the modernization of regulations, collecting and purification systems, and beneficial waste management using a modern approach. We also found that the activated sludge process is the leading technology for wastewater purification, and anaerobic digestion is the leading technology for downstream waste. However, biological technologies appear inadequate and hydrothermal carbonization, already applicable at full scale, is the best candidate for playing a significant role in managing municipal sewage sludge produced by big towns and small villages.

The Thermochemical Conversion of Forestry Residues from Silver Fir (Abies alba Mill.) by Torrefaction and Pyrolysis

Forestry residue is a renewable energy biomass whose valorization has increased due to the interest in replacing exhaustible and environmentally unfriendly fossil resources. Needles, cones and bark from silver fir were thermally processed by separated and combined torrefaction (250 °C) and pyrolysis (550 °C). The torrefaction removed the humidity and extractives and degraded the hemicelluloses, significantly decreasing the oxygen content to ~11 wt% and increasing the carbon content to ~80 wt%, while enhancing the calorific value of the solids (~32 MJ/kg). The pyrolysis produced solid materials with high amounts of fixed carbon (~60–70 wt%) and high heating values, of ~29 MJ/kg. The combined torrefaction + pyrolysis increased the energy yield of the process and decreased the O/C and H/C atomic ratios to about 0.1 and 0.5, respectively, which is close to those of coals. It also led to condensable products with more homogeneously distributed compounds, regardless of the initial biomass type. More than 110 chemical compounds were confirmed in the condensable products, in amounts that depended on the type of starting material and on the thermal treatment. These included the following: terpenes, from extractives; furans, acids and linear ketones, from hemicelluloses; cyclic ketones and saccharides, from cellulose; and aromatic hydrocarbons and phenol derivatives, from lignin. Clear distinctions between the thermal procedures and the sample origins were evidenced by an exploratory data analysis (PCA), which suggested the presence of different types of lignin in the three starting materials.