The Biological Drying of Municipal Waste in an Industrial Reactor—A Case Study

Anaerobic co-digestion of paper sludge: Feasibility of additional methane generation in mechanical-biological treatment plants

In this work, the feasibility of the anaerobic digestion of paper sludge as a co-substrate in anaerobic digestion mechanical-biological treatment (MBT) plants is investigated. In the first phase, the biochemical properties, biomethane potential (BMP), and pollutant contents of 20 different industrial paper sludges are determined. Following the general evaluation in the BMP tests, the second phase of the project involves the semi-continuous co-digestion of six paper sludges in continuous stirred reactors (CSTR). Paper sludges are categorized according to their origin within the pulp and paper mills: Deinking Sludge (DS), Primary Sludge (PS) and Biological Sludge (BS). The analysis of potentially inhibiting elements shows that the concentrations of chlororganic compounds, mineral oil and some heavy metals are highest in DS, while the mean heavy metal loads in all paper sludges are relatively low compared to other industrial sludges. Large differences in total solids (TS) and volatile solids (VS) contents are observed among the different paper sludges investigated, with DS having the highest TS due to the high inorganic contents. The BMP of the investigated sludges ranges from 90 to 355 NL CH₄ kg^-1 VS. In subsequent semi-continuous co-digestion experiments simulating MBT conditions, three DS and two fiber sludges (a mixture of PS and BS) show good methane generation rates, while one fiber sludge causes inhibition and indicates an increase in viscosity. In general, co-digestion of paper sludge in anaerobic digestion MBT plants can be a viable option for energy production and also facilitates a safe disposal of the paper sludge digestates.

Impact of Biochar Addition and Air-Flow Rate on Ammonia and Carbon Dioxide Concentration in the Emitted Gases from Aerobic Biostabilization of Waste

Application of additives to waste may influence the course of the biostabilization process and contribute to its higher effectiveness, as well as to a reduction in greenhouse gas and ammonia (NH₃) emission from this process. This paper presents research on the impact of biochar addition on the course of the biostabilization process of an undersized fraction from municipal solid waste (UFMSW) in terms of temperature changes, CO₂ concentration in the exhaust gases, NH₃ emission from the process, as well as changes in the carbon and nitrogen content in the processed waste. Six different biochar additives and three different air-flow rates were investigated for 21 days. It was found that biochar addition contributes to extending the thermophilic phase duration (observed in the case of the addition of 3% and 5% of biochar). The concentration of CO₂ in exhaust gases was closely related to the course of temperature changes. The highest concentration of CO₂ in the process gases (approx. 18–19%) was recorded for the addition of 10% and 20% of biochar at the lowest air-flow rate applied. It was found that the addition of 3% or a higher amount of biochar reduces nitrogen losses in the processed UFMSW and reduces NH₃ emission by over 90% compared to the control.