A Principal Component Analysis in Switchgrass Chemical Composition

Lignocellulose, Cellulose and Lignin as Renewable Alternative Fuels for Direct Biomass Fuel Cells

In recent years the use of renewable sources, such as lignocellulosic biomass (LCB), as the fuel for various types of fuel cells received growing interest. Different types of fuel cells, that is, operated at low temperatures (T<100 °C; microbial fuel cells (MFC), alkaline (AFCs) and flow fuel cells (FFCs)), intermediate temperatures (T in the range 150-300 °C, proton-conducting inorganic-organic composite membrane fuel cells), and high temperatures (T≥500 °C, direct carbon fuel cells (DCFCs)), have been used for the conversion of the chemical energy in LCB to electrical energy. The economic advantage of the direct use of LCB consists of avoiding the acid hydrolysis of cellulose to glucose for low-temperature fuel cells and the pretreatment at high temperatures necessary to convert biomass to biochar (pyrolysis) in the case of high-temperature fuel cells. In this Review, the characteristics of direct biomass fuel cells are presented and their performance is compared with that of indirect biomass fuel cells fed with glucose (low-temperature fuel cells) and biochar (high-temperature fuel cells).

Characterization of Chemically Activated Carbons Prepared from Miscanthus and Switchgrass Biomass

Lignocellulosic biomass, including that of energy crops, can be an alternative source to produce activated carbons (ACs). Miscanthus and switchgrass straw were used to produce ACs in a two-step process. Crushed plant material was carbonized at 600 °C and then obtained carbon was activated using NaOH or KOH at 750 °C. The content of surface oxygen groups was determined using Boehm’s method. The porosity of ACs was assayed using the nitrogen adsorption/desorption technique, while their thermal resistance using the thermogravimetric method. The ACs derived from miscanthus and switchgrass were characterized by surfaces rich in chemical groups and a highly developed porous structure. The highest specific surface areas, over 1600 m²/g, were obtained after carbon treatment with NaOH. High values of iodine number, 1200–1240 mg/g, indicate an extensive system of micropores and their good adsorption properties. The type of activator affected the contents of oxygen functional groups and some porosity parameters as well as thermal stability ranges of the ACs. Among obtained carbons, the highest quality was found for these derived from M. sacchariflorus followed by switchgrass, after activation with NaOH. Hence, while these crop species are not as effective biomass sources as other energy grasses, they can become valuable feedstocks for ACs.