UV Light-Irradiated Photocatalytic Degradation of Coffee Processing Wastewater Using TiO2 as a Catalyst

Synthesis and characterization of Fe3O4@SiO2 -supported metal-organic framework PAEDTC@MIL-101 (Fe) for degradation of chlorpyrifos and diazinon pesticides

In this study, a new core-shell Fe3O4@SiO2/PAEDTC@MIL-101 (Fe) photocatalyst was prepared by sol-gel method and used to degrade diazinon (DZN) and chlorpyrifos (CPS) from aqueous solutions. The characteristics analyzed by various techniques indicate that the core-shell photocatalyst with a specific surface area of 992 m2/g, pore size of 1.35 nm and saturation magnetization of nanocomposite was 12 emu/g has been successfully synthesized and can be separated from the reaction solution by a magnetic field. The maximum efficiencies of DZN (98.8%) and CPS (99.9%) were provided at pH of 5, photocatalyst dosage of 0.6 g/L, pollutant concentration of 25 mg/L, radiation intensity of 15 W, and time of 60 min. The presence of anions such as sulfate, nitrate, bicarbonate, phosphate, and chloride had a negative effect on the performance of the photocatalysis system. Compared to the adsorption and photolysis systems alone, the photocatalytic process based on Fe3O4@SiO2/PAEDTC@MIL-101 (Fe) under two UV and visible light sources showed a high efficiency of 90% in the reaction time of 60 min. The BOD5/COD ratio improved after 50 min to above 0.4 with TOC and COD removal rates >80%. Scavenging tests showed that •OH radical, hole (h+), electron (e-), and O2•- anion were produced in the reaction reactor, and the •OH radical was the dominant species in the degradation of DZN and CPS. The stability tests confirmed the recyclability of the photocatalyst in 360 min of reactions, with a minimum reduction of 7%. Energy consumption for the present system during different reactions was between 15.61 and 25.06 kWh/m3 for DZN degradation and 10-22.87 kWh/m3 for CPS degradation.

Application of silver nanoparticles synthesized through varying biogenic and chemical methods for wastewater treatment and health aspects

Nanotechnology uses biological and non-biological materials to create new systems at the nanoscale level. In recent years, the use of silver nanomaterials has attracted worldwide attention thanks to their wide range of applications as catalysts in several environmental processes including the degradation of organic pollutants and medicinal biotechnology. This study reports the synthesis of silver nanoparticles (AgNPs) through different methods including the biogenic methods based on leaf extract of Conocarpus erectus and a bacterial strain Pseudomonas sp. as well as chemically based abiotic method and comparison of their dye degradation potential. The synthesis of AgNPs in all samples was confirmed by UV-visible spectroscopy peaks at 418-420 nm. Using scanning electrom microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray differaction (XRD), and X-ray photoelectron spectroscopy (XPS), the biologically synthesized AgNPs were characterized as spherical shape of material with capping proteins that were involved in the stabilization of nanoparticles (NPs). The biologically synthesized AgNPs showed higher degradation (< 90%) of dyes as compared to chemically synthesized NPs. A prominent reduction of total dissolved solids (TDS), electrical conductivity (EC), pH, and chemical oxygen demand (COD) in textile wastewater spiked with reactive black 5 and reactive red 120 was observed by biologically synthesized AgNPs. AgNPs synthesized by Conocarpus erectus and Pseudomonas sp. also showed better characteristic anticancer and antidiabetic activities as compared to chemically synthesized ones. The results of this study suggested that C. erectus and Pseudomonas sp. based AgNPs can be exploited as an eco-friendly and cost-efficient materials to treat the wastewater and potential other polluted environments as well as to serve the medicinal field.

The photocatalytic process in the treatment of polluted water

Wastewaters often contain toxic organic pollutants with a possible adverse effect on human health and aquatic life upon exposure. Persistent organic pollutants such as dyes and pesticides, pharmaceuticals, and other chemicals are gaining extensive attention. Water treatment utilizing photocatalysis has recently received a lot of interest. Photocatalysis is cutting-edge, alternative technology. It has various advantages, including functioning at normal temperatures and atmospheric pressure, cheap prices, no secondary waste creation, and being readily available and easily accessible. This review presented a comprehensive overview of the advances in the application of the photocatalytic process in the treatment of highly polluted industrial wastewater. The analysis of various literature revealed that TiO₂-based photocatalysts are highly effective in degrading organic pollutants from wastewater compared to other forms of wastewater treatment technologies. The electrical structure of a semiconductor plays a vital role in the photocatalyst's mechanism. The morphology of a photocatalyst is determined by the synthesis method, chemical content, and technical characteristics. The scaled-up of the photoreactors will significantly help in curbing the effect of organic pollutants in wastewater.

Recent research advancements in microwave photocatalytic treatment of aqueous solutions

In recent years, microwave (MW) photocatalytic treatment was used for the removal of several pollutants from wastewater to overcome the disadvantages of conventional photocatalytic treatment. MW irradiation significantly enhanced the photocatalytic degradation pollutants and is considered an innovative treatment approach. This enhancement in photoactivity was mainly attributed to thermal and non-thermal effects of the MW irradiation. Even though the thermal effects of MW irradiation have been conclusively studied, there are many conflicting results regarding the non-thermal effects in catalysts. In general, it has been verified that the non-thermal effects are due to the electrical and magnetic properties of MW. In this article, a detailed review of the recent advancements in MW-assisted photocatalysis has been done, emphasizing the non-thermal effects of MW radiation on the surface of the catalysts. Also, the evolution of external ultraviolet (UV) sources from the conventional Hg lamp to the latest microwave-driven electrodeless lamps (MDEL) has been discussed. MW photocatalytic treatment using MDELs showed complete removal of lignin, dimethyl phthalate (DMP), and azo dye reactive brilliant red X-3B (BR) and more than 90% removal for cimetidine (CMT), rhodamine B (RB), and methylene blue (MB). A brief comparison regarding the removal efficiencies of pollutants by various AOPs and MW photocatalysis has been made to understand the enhanced photoactivity. In addition, various operating parameters that affect the MW photocatalysis like MW intensity, pH, dissolved oxygen, and catalyst dosage; the degradation pathways of various pollutants; and the cost assessment of MW photocatalysis are discussed in detail. This paper will deliver a scientific and technical overview and useful information to scientists and engineers working in this field.

Application of visible light active photocatalysis for water contaminants: A review

Organic water pollutants are ubiquitous in the natural environment arising from domestic products as well as current and legacy industrial processes. Many of these organic water pollutants are recalcitrant and only partially degraded using conventional water and wastewater treatment processes. In recent decades, visible light active photocatalyst has gained attention as a non-conventional alternative for the removal of organic pollutants during water treatment, including industrial wastewater and drinking water treatment. This paper reviews the current state of research on the use of visible light active photocatalysts, their modified methods, efficacy, and pilot-scale applications for the degradation of organic pollutants in water supplies and waste streams. Initially, the general mechanism of the visible light active photocatalyst is evaluated, followed by an overview of the major synthesis techniques. Because few of these photocatalysts are commercialized, particular attention was given to summarizing the different types of visible light active photocatalysts developed to the pilot-scale stage for practical application and commercialization. The organic pollutant degradation ability of these visible light active photocatalysts was found to be considerable and in many cases comparable with existing and commercially available advanced oxidation processes. Finally, this review concludes with a summary of current achievements and challenges as well as possible directions for further research. PRACTITIONER POINTS: Visible light active photocatalysis is a promising advanced oxidation process (AOP) for the reduction of organic water pollutants. Various mechanisms of photocatalysis using visible light active materials are identified and discussed. Many recent photocatalysts are synthesized from renewable materials that are more sustainable for applications in the 21st century. Only a small number of pilot-scale applications exist and these are outlined in this review.

Biotreatment Potential and Microbial Communities in Aerobic Bioreactor Systems Treating Agro-Industrial Wastewaters

The thriving agro-industry sector accounts for an essential part of the global gross domestic product, as the need for food and feed production is rising. However, the industrial processing of agricultural products requires the use of water at all stages, which consequently leads to the production of vast amounts of effluents with diverse characteristics, which contain a significantly elevated organic content. This fact reinforces the need for action to control and minimize the environmental impact of the produced wastewater, and activated sludge systems constitute a highly reliable solution for its treatment. The current review offers novel insights on the efficiency of aerobic biosystems in the treatment of agro-industrial wastewaters and their ecology, with an additional focus on the biotechnological potential of the activated sludge of such wastewater treatment plants.

Floating Carbon-Doped TiO2 Photocatalyst with Metallic Underlayers Investigation for Polluted Water Treatment under Visible-Light Irradiation

In the current study, we analysed the influence of metallic underlayers on carbon-doped TiO2 films for RhB decomposition and Salmonella typhimurium inactivation under visible-light irradiation. All the experiments were divided into two parts. First, layered M/C-doped-TiO2 film structures (M = Ni, Nb, Cu) were prepared by magnetron sputtering technique on borosilicate glass substrates in the two-step deposition process. The influence of metal underlayer on the formation of the carbon-doped TiO2 films was characterised by X-ray diffractometer, scanning electron microscope, and atomic force microscope. The comparison between the visible-light assisted photocatalytic activity of M/C-doped TiO2 structures was performed by the photocatalytic bleaching tests of Rhodamine B dye aqueous solution. The best photocatalytic performance was observed for Ni/C-doped-TiO2 film combination. During the second part of the study, the Ni/C-doped-TiO2 film combination was deposited on high-density polyethylene beads which were selected as a floating substrate. The morphology and surface chemical analyses of the floating photocatalyst were performed. The viability and membrane permeability of Salmonella typhimurium were tested in cycling experiments under UV-B and visible-light irradiation. Three consecutive photocatalytic treatments of fresh bacteria suspensions with the same set of floating photocatalyst showed promising results, as after the third 1 h-long treatment bacteria viability was still reduced by 90% and 50% for UV-B and visible-light irradiation, respectively. The membrane permeability and ethidium fluorescence results suggest that Ni underlayer might have direct and indirect effect on the bacteria inactivation process. Additionally, relatively low loss of the photocatalyst efficiency suggests that floating C-doped TiO2 photocatalyst with the Ni underlayer might be seen as the possible solution for the used photocatalyst recovery issue.

Investigation of TNT red wastewater treatment technology using the combination of advanced oxidation processes

Different types of advanced oxidation processes and their combinations such as O₃/H₂O₂/UV, O₃/Fenton/UV, O₃/TiO₂/UV, Fenton/H₂O₂/UV, Fenton/TiO₂/UV, TiO₂/H₂O₂/UV, TiO₂/H₂O₂/O₃/UV, TiO₂/O₃/Fenton/UV, TiO₂/H₂O₂/Fenton/UV and O₃/H₂O₂/Fenton/UV were studied for the treatment of undiluted red wastewater from Z113 Factory. The treatment efficiency was evaluated by analyzing chemical oxygen demand (COD) reduction, % degradation of α-TNT, 2,4-DNT, 2,6-DNT, 2,4-DNT-3-SO₃Na and 2,4-DNT-5-SO₃Na. Among studied processes Fenton/TiO₂/O₃/UV was the most effective technology to treat red wastewater. It allows to reduce >99% of COD, α-TNT, 2,4-DNT, 2,6-DNT, 2,4-DNT-3-SO₃Na and 2,4-DNT-5-SO₃Na after 30 h of treatment with optimum operating conditions: rotation speed of 600 rpm, pH of 4 and temperature of 40 °C. According to the chromatograms obtained by gas chromatograph/mass spectrometer (GC/MS), intermediates of the decomposition of pollutants in red wastewater were identified. GC/MS, HPLC, UV-vis and Bacterial Toxicity test were used to assess effluent quality changes before and after treatment. By economic analysis, the studied process had the potential to apply in practice to treat real wastewater at the Z113 Factory.

Bio-Hydrogen Production from Wastewater: A Comparative Study of Low Energy Intensive Production Processes

Billions of litres of wastewater are produced daily from domestic and industrial areas, and whilst wastewater is often perceived as a problem, it has the potential to be viewed as a rich source for resources and energy. Wastewater contains between four and five times more energy than is required to treat it, and is a potential source of bio-hydrogen—a clean energy vector, a feedstock chemical and a fuel, widely recognised to have a role in the decarbonisation of the future energy system. This paper investigates sustainable, low-energy intensive routes for hydrogen production from wastewater, critically analysing five technologies, namely photo-fermentation, dark fermentation, photocatalysis, microbial photo electrochemical processes and microbial electrolysis cells (MECs). The paper compares key parameters influencing H2 production yield, such as pH, temperature and reactor design, summarises the state of the art in each area, and highlights the scale-up technical challenges. In addition to H2 production, these processes can be used for partial wastewater remediation, providing at least 45% reduction in chemical oxygen demand (COD), and are suitable for integration into existing wastewater treatment plants. Key advancements in lab-based research are included, highlighting the potential for each technology to contribute to the development of clean energy. Whilst there have been efforts to scale dark fermentation, electro and photo chemical technologies are still at the early stages of development (Technology Readiness Levels below 4); therefore, pilot plants and demonstrators sited at wastewater treatment facilities are needed to assess commercial viability. As such, a multidisciplinary approach is needed to overcome the current barriers to implementation, integrating expertise in engineering, chemistry and microbiology with the commercial experience of both water and energy sectors. The review concludes by highlighting MECs as a promising technology, due to excellent system modularity, good hydrogen yield (3.6–7.9 L/L/d from synthetic wastewater) and the potential to remove up to 80% COD from influent streams.

Impact of H2O2 on the Lactic and Formic Acid Degradation in Presence of TiO2 Rutile and Anatase Phases under UV and Visible Light

The degradation rates of formic acid and lactic acid in the presence and absence of H2O2 were studied, utilizing several TiO2 catalysts: PC105 (100% anatase), MPT 625 (100% rutile), and P25 (80% anatase/20% rutile), and the results were discussed with regards to the current literature. The impact of hydrogen peroxide on the photocatalytic efficiency of eleven TiO2 samples was then determined, using commercial anatase structures (PC105, PC500, UV100), commercial mixed anatase/rutile (P25 and P90), and six rutile (two commercial samples: MPT 625 and C-R160, and four home-made rutile samples were synthesized by TiCl4 hydrolysis). The effect of catalyst surface area and TiO2 phase on the degradation rate of lactic acid (LA) and the decomposition of H2O2 was studied and discussed in regard to the active species generated. The intermediate products formed in the absence and presence of H2O2 were also an important factor in the comparison. Finally, the efficiency of the degradation of LA and formic acid (FA) in the presence of rutile and H2O2 was determined under visible light, and their reactivity was compared. The intermediate products formed in the degradation of LA were identified and quantified and compared to those obtained under UV (Ultra-Violet).