Phytoremediation: The Sustainable Strategy for Improving Indoor and Outdoor Air Quality

Implementation of a botanical bioscrubber for the treatment of indoor ambient air

This study explores the effectiveness of a botanical bioscrubber system using Golden Pothos (Epipremnum aureum) in hydroponic setups to mitigate common indoor atmospheric pollutants. Over a 100-day operation, levels of SO2, NO2, O3, TVOC, CO, CO2, PM10, and PM2.5 were monitored, with a significant reduction in carbon-based compounds and particulate matter-. Notably, CO2 and PM2.5 removal efficiencies were significantly correlated with the foliar area, suggesting that the interaction between pollutants and plant leaves plays a crucial role in the phytoremediation process. In contrast, CO, PM10, and TVOC exhibited varied removal efficiencies, hinting the involvement of mechanisms beyond leaf interaction, such as adsorption in irrigation water or root system capture. The absence of significant correlations for PM10 emphasized the need for further investigation into alternative removal processes, potentially mediated by the root system. Overall, our findings suggest that botanical bioscrubbers, particularly those utilizing Golden Pothos, hold promise for indoor air purification through plant-based systems.

Advancing Methodologies for Investigating PM2.5 Removal Using Green Wall System

Combustion processes are the primary source of fine particulate matter in indoor air. Since the 1970s, plants have been extensively studied for their potential to reduce indoor air pollution. Leaves can retain particles on their surfaces, influenced by factors such as wax content and the presence of hairs. This study introduces an innovative experimental approach using metal oxide particles in an office-like environment to evaluate the depolluting effect of plant walls. Two plant walls were installed in a controlled room, housing three plant species: Aglaonema commutatum 'Silver Bay', Dracaena fragrans, and Epipremnum aureum. Metal oxide particles were introduced via a compressed air blower positioned between the two walls. The concentration of these particles was monitored using PM2.5 sensors, and the deposition of iron (Fe) on the leaves was quantified through Inductively Coupled Plasma Mass Spectrometry (ICP-MS). This novel methodology effectively demonstrated the utility of both real-time sensors and ICP-MS in quantifying airborne particle concentrations and leaf deposition, respectively. The results revealed that Dracaena fragrans had a 44% higher Fe particle retention rate compared to the control (wallpaper). However, further validation through methodological replication is necessary to confirm the reproducibility of these findings.

Phytoremediation of formaldehyde by three selected non-native indoor plant species

Formaldehyde is an organic volatile compound and a commonly used chemical in various construction materials thus causing dwellers to be exposed to it inside a building. Its remediation from indoor air has been carried out through various techniques where potted plants and living walls are at the front foot. It is necessary to study plants under various conditions for their efficiency. We selected three plant species Epipremnum aureum, Chlorophytum comosum, and Spathiphyllum wallisii non-native of Bahrain. These plants were tested under normal conditions in a sealed fumigation box where formaldehyde concentration was kept ∼3 ppm, CO2 ∼ 450 ppm, light intensity 1000 Lx (equal to 13.5 µmol.m-2.s-1), irrigated with tap water. Analysis of Variance (ANOVA) statistical method was performed to test the significant differences of purification efficiencies of the tested indoor plants against HCHO. In addition, the statistical method was used to test the significant difference, if any, of the plants to CO2 emission because of absorbing HCHO. The physical health of plants and their short-term remediation ability reveals that all plants exhibited up to 70% remediation potential and tolerance to remediate the target chemical. It is evident that the impact of local environmental factors on the plants is negligible.

Advances in amelioration of air pollution using plants and associated microbes: An outlook on phytoremediation and other plant-based technologies

Globally, air pollution is an unfortunate aftermath of rapid industrialization and urbanization. Although the best strategy is to prevent air pollution, it is not always feasible. This makes it imperative to devise and implement techniques that can clean the air continuously. Plants and microbes have a natural potential to transform or degrade pollutants. Hence, strategies that use this potential of living biomass to remediate air pollution seem to be promising. The simplest future trend can be planting suitable plant-microbe species capable of removing air pollutants like SO2, CO2, CO, NOX and particulate matter (PM) along roadsides and inside the buildings. Established wastewater treatment strategies such as microbial fuel cells (MFC) and constructed wetlands (CW) can be suitably modified to ameliorate air pollution. Green architecture involving green walls and green roofs is facile and aesthetic, providing urban ecosystem services. Certain microbe-based bioreactors such as bioscrubbers and biofilters may be useful in small confined spaces. Several generative models have been developed to assist with planning and managing green spaces in urban locales. The physiological limitations of using living organisms can be circumvent by applying biotechnology and transgenics to improve their potential. This review provides a comprehensive update on not just the plants and associated microbes for the mitigation of air pollution, but also lists the technologies that are available and/or can be modified and used for air pollution control. The article also gives a detailed analysis of this topic in the form of strengths-weaknesses-opportunities-challenges (SWOC). The strategies mentioned in this review would help to attain corporate Environmental Social and Governance (ESG) and Sustainable Development Goals (SDGs), while reducing carbon footprint in the urban scenario. The review aims to emphasise that urbanization is possible while tackling air pollution using facile, green techniques involving plants and associated microbes.

Potentially toxic elements capture by an active living wall in indoor environments: Effect of species in air phytoremediation

Indoor air pollution is a serious health problem throughout the world. Plants are known to be able to reduce the effect of air pollution and improve indoor air quality (IAQ). The aim of the present study was to compare the effectiveness of four plant species (Tradescantia zebrina hort. ex Bosse, Philodendron scandens K. Koch & Sello, Ficus pumila L. and Chlorophtytum comosum (Thunb.) Jacques) planted in an active living wall (ALW) for capturing particle pollutants. The ALW was introduced in a glass chamber and exposed to large (10-40 μm) and fine (1.2-10 μm) airborne particles containing a fixed concentration of potentially toxic elements (Al, B, Cd, Co, Cr, Cu, Ni and Pb). The surface particle deposition (sPM) was estimated in the leaves from the four species and the potentially toxic element concentration in the particulate matter (PM) was measured in plants, medium culture and in the ALW support system. The distribution of different particle size fractions differed between species. The capacity to trap particles on leaf surfaces was similar among the species (4.7-13 ng cm-2) except when comparing Tradescantia and Chlorophytum with Ficus, being higher in the latter species. Differences in toxic elements accumulation capacity were observed between species depending on the elements considered. The percentage of reduction in indoor pollution using an ALW was in a range of 65-79% being similar between species. Plants were the most important component of the ALW in terms of accumulation of indoor potentially toxic elements. The data presented here could be used to model the effectiveness of ALW systems schemes in improving IAQ.

Biosolids application enhances the growth of Aloe vera plants and provides a sustainable practice for nutrient recirculation in agricultural soils

In the present study, the fertilization potential of biosolids (sewage sludge; SS) for the cultivation of Aloe vera plants was investigated using block design. Pot experiments were conducted in this study using 50, 100, 150, and 200 g/kg of SS. Results showed that SS-fertilized soils significantly (p < 0.05) affected the proximate, biochemical, and heavy metal parameters of A. vera plants. In particular, the T4 treatment gave the best results with maximum plant height 62.21 ± 0.10 cm, number of leaves per plant 18.00 ± 4.00, shoot-to-root ratio 6:1, fresh weight 1972.10 ± 0.07 g per plant, dry weight 175.49 ± 0.15 g per plant, total chlorophyll content (TCC) 0.41 ± 0.02 mg/g fwt., carotenoids 0.25 ± 0.04 mg/g, total flavonoids 7.55 ± 0.05 mg/g, total tannins 3.87 ± 0.06 µg/g, ascorbic acid 532.14 ± 0.10 µg/g, superoxide dismutase (SOD) 46.28 ± 0.19 µg/g, catalase (CAT) 119.23 ± 0.17 µg/g, salicylic acid 3.05 ± 0.12 mg/ml and anthraquinones 0.45 ± 0.04 mg/ml, respectively. The proximate plant characteristics were 96.25 ± 2.71% moisture content, crude protein 0.93 ± 0.05%, crude fiber 5.78 ± 0.44%, crude lipid 3.25 ± 0.02%, lignin 10.74 ± 0.30%, cellulose 13.56 ± 1.06%, hemicellulose 7.24 ± 0.14%, ash 8.75 ± 0.03%, and carbohydrate contents 52.18 ± 1.10% in comparison with control treatment. The bioaccumulation factor showed that heavy metal accumulation was in the order of Cd < Ni < Cu < Pb < Cr < Zn < Fe. The prediction models developed on the basis of soil properties showed good fitness results for the prediction of heavy metal uptake by A. vera plants. The study presented a sustainable approach for managing SS in an eco-friendly way while producing good-quality A. vera plants.

Phytoremediation for the indoor environment: a state-of-the-art review

Poor indoor air quality has become of particular concern within the built environment due to the time people spend indoors, and the associated health burden. Volatile organic compounds (VOCs) off-gassing from synthetic materials, nitrogen dioxide and harmful outdoor VOCs such benzene, toluene, ethyl-benzene and xylene penetrate into the indoor environment through ventilation and are the main contributors to poor indoor air quality with health effects. A considerable body of literature over the last four decades has demonstrate the removal of gaseous contaminants through phytoremediation, a technology that relies on plant material and technologies to remediate contaminated air streams. In this review we present a state-of-the-art on indoor phytoremediation over the last decade. Here we present a review of 38 research articles on both active and passive phytoremediation, and describe the specific chemical removal efficiency of different systems. The literature clearly indicates the efficacy of these systems for the removal of gaseous contaminants in the indoor environment, however it is evident that the application of phytoremediation technologies for research purposes in-situ is currently significantly under studied. In addition, it is common for research studies to assess the removal of single chemical species under controlled conditions, with little relevancy to real-world settings easily concluded. The authors therefore recommend that future phytoremediation research be conducted both in-situ and on chemical sources of a mixed nature, such as those experienced in the urban environment like petroleum vapour, vehicle emissions, and mixed synthetic furnishings off-gassing. The assessment of these systems both in static chambers for their theoretical performance, and in-situ for these mixed chemical sources is essential for the progression of this research field and the widespread adoption of this technology.

Effect of farmyard manure, elemental sulphur and EDTA on growth and phytoextraction of cadmium by spider plants (Chlorophytum comosum L.) under Cd stress

Cadmium (Cd) contamination is considered as a widespread concern at global scale which is serious threats to human health. Phytoremediation is an eco-friendly approach which can remove or immobilize Cd from the soil. Different organic and inorganic amendments can potentially enhance Cd phytoremediation efficiency but the comparison of farmyard manure (FM), elemental sulphur (S) and ethylenediaminetetraacetic acid (EDTA) for Cd phytoremediation through spider plants (Chlorophytum comosum L.) remained unanswered. The present study evaluated the efficiency of S (0.1 and 0.2%), EDTA (0.1 and 0.2%, represented as EDTA-0.1 and EDTA-0.2) and FM (0.5 and 1%, represented as FM-0.5 and FM-1) for remediation of Cd contaminated soils (50 and 100 mg kg-1, represented as Cd-50 and Cd-100) through spider plants. Results depicted that the highest shoots and roots dry biomass was found in FM treated plants followed by S, EDTA and control except in EDTA-0.2 treatment in which the lowest values of these parameters were observed. Application of FM-1 significantly increased the shoot dry weight (120%), root dry weight (99%), as well as photosynthetic attributes in Cd-50 as compared to control. Application of EDTA-0.2 increased the bioavailable fraction of Cd than control and the maximum increase was observed in Cd-100. The highest Cd concentrations in shoot and roots were found in EDTA treated plants followed by S, control and FM irrespective of Cd and amendment levels. Maximum Cd in roots (109%) and shoots (156%) was recorded in plants grown in Cd-100 with EDTA-0.2 than control. The maximum bioaccumulation factor, translocation index, harvest index and root to shoot translocation were observed with EDTA than control and other treatments. EDTA along with spider plants may enhance the uptake of Cd but lower biomass production in the highest dose of EDTA may questioned the efficiency of EDTA.

Potential implementation of trees to remediate contaminated soil in Egypt

Soil and water in Egypt have become contaminated with multiple pollutants. These contaminants arise from diverse sources, including misuse of fertilizers, industrial effluent discharged into irrigation water, discharge of wastewater in rural areas, and mining activities discharging wet and dry atmospheric deposits and heavy metal contamination. The pollutants can directly affect the quality of air, water, and food and have an adverse effect on human health. About 33% of the cultivated lands in Egypt are salinized due to extreme conditions like high temperatures and aridity. The presence of elevated salt levels in the soil leads to grave consequences for seed germination, plant biochemical processes, development, and reproduction, all of which result in the output of reactive oxygen species and eventually plant death. Despite the possibility of thermal, chemical, or a combination of the two to remediate contaminated soils, their applications are complicated and costly. Some plants, called hyperaccumulators, exhibit the potential to clean up pollutants safely from the soil and water at a low cost. All the technologies used in soil decontamination are called phytoremediation. Some physiological (e.g., phytoextraction, phytostabilization, phytotransformation, rhizofiltration, phytostimulation, phytovolatilization, phytodegradation, and phytodesalination) and molecular parameters (e.g., genes, peptides, and proteins) are involved in heavy metals accumulation of these plants. Although trees are not classified as hyperaccumulators, they have recently proved higher phytoremediation potential than herbaceous plants due to their deeper root system and greater biomass growth. Indeed, this review sheds the light on the application of trees for the phytoremediation of salts and heavy metals in Egypt.

Recent Strategies for Bioremediation of Emerging Pollutants: A Review for a Green and Sustainable Environment

Environmental pollution brought on by xenobiotics and other related recalcitrant compounds have recently been identified as a major risk to both human health and the natural environment. Due to their toxicity and non-biodegradability, a wide range of pollutants, such as heavy metals, polychlorinated biphenyls, plastics, and various agrochemicals are present in the environment. Bioremediation is an effective cleaning technique for removing toxic waste from polluted environments that is gaining popularity. Various microorganisms, including aerobes and anaerobes, are used in bioremediation to treat contaminated sites. Microorganisms play a major role in bioremediation, given that it is a process in which hazardous wastes and pollutants are eliminated, degraded, detoxified, and immobilized. Pollutants are degraded and converted to less toxic forms, which is a primary goal of bioremediation. Ex situ or in situ bioremediation can be used, depending on a variety of factors, such as cost, pollutant types, and concentration. As a result, a suitable bioremediation method has been chosen. This review focuses on the most recent developments in bioremediation techniques, how microorganisms break down different pollutants, and what the future holds for bioremediation in order to reduce the amount of pollution in the world.

Phytoremediation of indoor formaldehyde by plants and plant material

Formaldehyde evolves from various household items and is of environmental and public health concern. Removal of this contaminant from the indoor air is of utmost importance and currently, various practices are in the field. Among these practices, indoor plants are of particular importance because they help in controlling indoor temperature, moisture, and oxygen concentration. Plants and plant materials studied for the purpose have been reviewed hereunder. The main topics of the review are, mechanism of phytoremediation, plants and their benefits, plant material in formaldehyde remediation, and airtight environmental and health issues. Future research in the field is also highlighted which will help new researches to plan for the remediation of formaldehyde in indoor air. The remediation capacity of several plants has been tabulated and compared, which gives easy access to assess various plants for remediation of the target pollutant. Challenges and issues in the phytoremediation of formaldehyde are also discussed.Novelty statement: Phytoremediation is a well-known technique to mitigate various organic and inorganic pollutants. The technique has been used by various researchers for maintaining indoor air quality but its efficiency under real-world conditions and human activities is still a question and is vastly affected relative to laboratory conditions. Several modifications in the field are in progress, here in this review article we have summarized and highlighted new directions in the field which could be a better solution to the problem in the future.

Effect of airflow pattern and distance on removal of particulate matters and volatile organic compounds from cigarette smoke using Sansevieria trifasciata botanical biofilter

Botanical biofilters can effectively remove indoor air pollution. However, to apply botanical biofilters in situ, the distance of botanical biofilter to the pollutants and airflow pattern can be important factors impacting efficiency. This study examined the removal efficiency of particulate matters (PMs) and volatile organic compounds (VOCs) from cigarette smoke, such as formaldehyde and acetone, at various distances (100 cm, 175 cm, 240 cm, and 315 cm) using a Sansevieria trifasciata botanical biofilter. The botanical biofilter was placed inside a testing room (24 m³) and exposed to cigarette smoke. The pollutants removal efficiency was evaluated for six cycles (24 h/cycle) and one cycle as a recovery period where botanical biofilter was placed under normal conditions for 30 days. Results showed that the botanical biofilter could remove 140-250 μg m^-3, 147-257 μg m^-3, 212-455 μg m^-3 for PM₁, PM_2.5, and PM₁₀, respectively, at 8 h. Total VOCs, formaldehyde, and acetone removal were 40%-65%, 46%-69%, and 31%-61% at 24 h. PMs and VOCs removal efficiency can be affected by both distance and pattern of airflow in the testing room. The highest PM₁ and PM_2.5 elimination appeared at 240 cm and 315 cm, while VOCs removal was high at 100 cm. Botanical biofilter creates airflow vortices around 100 cm, indicating low removal of PMs. This is the first study that demonstrated the effect of airflow patterns on different pollutants removal efficiency.