Acoustic Properties of Larch Bark Panels

Fire Retardancy of Cementitious Panels with Larch and Spruce Bark as Bio-Admixtures

The aim of this study is to investigate the production of fire-resistant panels made out of bark from spruce (Picea abies), larch (Larix decidua Mill.) and cement. This research included test panels produced from bark, cement, water and cement-bonded recycling material aiming for the target density of 750 kg/m³. The physical (density, dimension stability, thickness swelling) and mechanical properties such as tensile strength and compressive strength together with fire resistance were tested. Considering the results, appealing values have been achieved: max. compressive strength: 3.42 N/mm²; max. thickness swelling: 5.48%; and density: 515 to 791 kg/m³. In principle, the properties of the produced panels depend not only on the density, but also on the hydration and, above all, on the compaction and the composition of the boards. The fire tests demonstrated that the produced panels have an enormous potential in terms of fire resistance and could be utilized for fire-retardant applications.

Characterisation of Wood Particles Used in the Particleboard Production as a Function of Their Moisture Content

The properties of particleboards and the course of their manufacturing process depend on the characteristics of wood particles, their degree of fineness, geometry, and moisture content. This research work aims to investigate the physical properties of wood particles used in the particleboard production in dependence on their moisture content. Two types of particles currently used in the production of three-layer particleboards, i.e., microparticles (MP) for the outer layers of particleboards and particles for the core layers (PCL), were used in the study. The particles with a moisture content of 0.55%, 3.5%, 7%, 10%, 15%, and 20% were tested for their poured bulk density (ρp), tapped bulk density (ρt), compression ratio (k), angle of repose (αR), and slippery angle of repose (αs). It was found that irrespective of the fineness of the particles, an increase in their moisture content caused an increase in the angle of repose and slippery angle of repose and an increase in poured and tapped bulk density, while for PCL, the biggest changes in bulk density occurred in the range up to 15% of moisture content, and for MP in the range above 7% of moisture content, respectively. An increase in the moisture content of PCL in the range studied results in a significant increase in the compression ratio from 47.1% to 66.7%. The compression ratio of MP increases only up to 15% of their moisture content-a change of value from 47.1% to 58.7%.

Selected Properties of Cement Bound Spruce and Larch Bark Bio-Aggregates

The aim of this study is to investigate the suitability of spruce and larch bark for the production of cement-bonded composites. At the beginning of this research, the curing behaviour of the admixtures was quantified with temperature profiles when testing spruce, larch, pine and poplar bark, to determine the compatibility between the components of the bio-aggregates, to analyse the cement curing and to establish which bark species should be successfully included in cement bonded composites. Considering the results, it was observed that the average densities of 600–700 kg/m³ of bio-aggregates are 40–55% lower than that of established products on the market, although spruce and larch bark are in a similar range. The situation is different for the compressive strength, as larch bark showed up to 30% higher values than spruce bark. This study revealed also different hardening characteristics of the two cement types used as binders for spruce and larch bark. The results of this study demonstrated that tree bark of Picea abies and Larix decidua Mill. can be successfully utilized for the production of a cement-bonded composite material.

Delignification Effects on Indonesian Momala (Homalium foetidum) and Korean Red Toon (Toona sinensis) Hardwood Pore Structure and Sound Absorption Capabilities

Among the various methods used to improve the sound absorption capability of wood, we focused on delignification in Indonesian momala (Homalium foetidum) and Korean red toon (Toona sinensis). We performed gas permeability, pore size, and porosity analyses and evaluated how the change in the pore structure affects the sound absorption capabilities. Results show that delignification increased the through-pore porosity and improved sound absorption capability in both species. In addition, the air gap in the rear space maximized the sound absorption of momala and the red toon. The noise reduction coefficient (NRC) of delignified momala (90 min) with a 3 cm air gap was 0.359 ± 0.023. This is approximately 154.6% higher than that of untreated momala without an air gap. The NRC of delignificated red toon (90 min) with a 3 cm air gap was 0.324 ± 0.040, an increase of 604.3% over untreated red toon without an air gap.

Sound-Absorption Performance and Fractal Dimension Feature of Kapok Fibre/Polycaprolactone Composites

This article introduces a kind of composite material made of kapok fibre and polycaprolactone by the hot-pressing method. The effects of volume density, mass fraction of kapok fibre, and thickness on the sound-absorption performance of composites were researched using a single-factor experiment. The sound-absorption performance of the composites was investigated by the transfer function method. Under the optimal process parameters, when the density of the composite material was 0.172 g/cm3, the mass fraction of kapok was 40%, and the thickness was 2 cm, the composite material reached the maximum sound-absorption coefficient of 0.830, and when the sound-absorption frequency was 6300 Hz, the average sound-absorption coefficient was 0.520, and the sound-absorption band was wide. This research used the box dimension method to calculate composites’ fractal dimensions by using the Matlab program based on the fractal theory. It analysed the relationships between fractal dimension and volume density, fractal dimension and mass fraction of kapok fibre, and fractal dimension and thickness. The quantitative relations between fractal dimension and maximum sound-absorption coefficient, fractal dimension, and resonant sound-absorption frequency were derived, which provided a theoretical basis for studying sound-absorption performance. The results showed that kapok fibre/polycaprolactone composites had strong fractal characteristics, which had important guiding significance for the sound-absorption performance of kapok fibre composites.

Thermophysical Properties of Larch Bark Composite Panels

The effects of using 100% larch bark (Larix decidua Mill) as a raw material for composite boards on the thermophysical properties of this innovative material were investigated in this study. Panels made of larch bark with 4–11 mm and 10–30 mm particle size, with ground bark oriented parallel and perpendicular to the panel’s plane at densities varying from 350 to 700 kg/m³ and bonded with urea-formaldehyde adhesive were analyzed for thermal conductivity, thermal resistivity and specific heat capacity. It was determined that there was a highly significant influence of bulk density on the thermal conductivity of all the panels. With an increase in the particle size, both parallel and perpendicular to the panel´s plane direction, the thermal conductivity also increased. The decrease of thermal diffusivity was a consequence of the increasing particle size, mostly in the parallel orientation of the bark particles due to the different pore structures. The specific heat capacity is not statistically significantly dependent on the density, particle size, glue amount and particle orientation.