Developing Models to Predict the Number of Fire Hotspots from an Accumulated Fuel Dryness Index by Vegetation Type and Region in Mexico

Estimation of potential wildfire behavior characteristics to assess wildfire danger in southwest China using deep learning schemes

Accurate estimation of potential wildfire behavior characteristics (PWBC) can improve wildfire danger assessment. However, wildfire behavior has been estimated by most fire spread models with immeasurable uncertainties and difficulties in large-scale applications. In this study, a PWBC estimation model (named PWBC-QR-BiLSTM) was proposed by coupling the Bi-directional Long Short-Term Memory (BiLSTM) and quantile regression (QR) methods. Multi-source data, including fuel, weather, topography, infrastructure, and landscape variables, were input into the PWBC-QR-BiLSTM model to estimate the potential rate of spread (ROS) and fire radiative power (FRP) over western Sichuan of China, and then to estimate the probability density of ROS and FRP. Daily ROS and FRP were extracted from the Global Fire Atlas and the MOD14A1/MYD14A1 product. The optimal PWBC-QR-BiLSTM model was determined using the Non-dominated Sorting Genetic Algorithm Ⅱ (NAGA-Ⅱ). Results showed that the PWBC-QR-BiLSTM performed well in estimating potential ROS and FRP with high accuracy (ROS: R2 > 0.7 and MAPE<30%, FRP: R2 > 0.8 and MAPE<25%). The modal PWBC values extracted from the estimated probability density were closer to the observed values, which can be regarded as a good indicator for wildfire danger assessment. The variable importance analysis also verified that fuel and infrastructure variables played an important role in driving wildfire behavior. This study suggests the potential of utilizing artificial intelligence to estimate PWBC and its probability density to improve the guidance on wildfire management.

Evaluating a New Relative Phenological Correction and the Effect of Sentinel-Based Earth Engine Compositing Approaches to Map Fire Severity and Burned Area

The remote sensing of fire severity and burned area is fundamental in the evaluation of fire impacts. The current study aimed to: (i) compare Sentinel-2 (S2) spectral indices to predict field-observed fire severity in Durango, Mexico; (ii) evaluate the effect of the compositing period (1 or 3 months), techniques (average or minimum), and phenological correction (constant offset, c, against a novel relative phenological correction, rc) on fire severity mapping, and (iii) determine fire perimeter accuracy. The Relative Burn Ratio (RBR), using S2 bands 8a and 12, provided the best correspondence with field-based fire severity (FBS). One-month rc minimum composites showed the highest correspondence with FBS (R2 = 0.83). The decrease in R2 using 3 months rather than 1 month was ≥0.05 (0.05–0.15) for c composites and <0.05 (0.02–0.03) for rc composites. Furthermore, using rc increased the R2 by 0.05–0.09 and 0.10–0.15 for the 3-month RBR and dNBR compared to the corresponding c composites. Rc composites also showed increases of up to 0.16–0.22 and 0.08–0.11 in kappa values and overall accuracy, respectively, in mapping fire perimeters against c composites. These results suggest a promising potential of the novel relative phenological correction to be systematically applied with automated algorithms to improve the accuracy and robustness of fire severity and perimeter evaluations.

Spatial and Temporal Variations of Predicting Fuel Load in Temperate Forests of Northeastern Mexico

The prediction of fuel load areas and species associated with these events reduces the response time to fight forest fires. The objective of this study was to estimate the annual fuel load from 2009–2013, predict the annual fuel load in the rest of the ecosystem, identify species that contribute most to this load and compare the percentage of area by risk category in the temperate forests of Tamaulipas. Fuel load was estimated with inventory data using three models. Fuel load was predicted with elevation, total annual precipitation, mean annual temperature, and enhanced vegetation index from satellite scenes using partial least squares regression. The highest concentration of fuel load was associated with the oak, oak-pine, pine forest and mountain mesophyll forest ecosystems. The contribution of genera to fuel load was different. Quercus contributed the most variation among clusters, and the contribution among Quercus species was similar. The results highlight the importance of focusing fuel management programs on this type of ecosystem, emphasizing actions in particular Quercus, and the results can also serve as a basis for future research, such as carbon sequestration and forest management programs.

Fuel-Specific Aggregation of Active Fire Detections for Rapid Mapping of Forest Fire Perimeters in Mexico

Context and Background. Active fires have the potential to provide early estimates of fire perimeters, but there is a lack of information about the best active fire aggregation distances and how they can vary between fuel types, particularly in large areas of study under diverse climatic conditions. Objectives. The current study aimed at analyzing the effect of aggregation distances for mapping fire perimeters from active fires for contrasting fuel types and regions in Mexico. Materials and Methods. Detections of MODIS and VIIRS active fires from the period 2012–2018 were used to obtain perimeters of aggregated active fires (AGAF) at four aggregation distances (750, 1000, 1125, and 1500 m). AGAF perimeters were compared against MODIS MCD64A1 burned area for a total of 24 fuel types and regions covering all the forest area of Mexico. Results/findings. Optimum aggregation distances varied between fuel types and regions, with the longest aggregation distances observed for the most arid regions and fuel types dominated by shrubs and grasslands. Lowest aggregation distances were obtained in the regions and fuel types with the densest forest canopy and more humid climate. Purpose/Novelty. To our best knowledge, this study is the first to analyze the effect of fuel type on the optimum aggregation distance for mapping fire perimeters directly from aggregated active fires. The methodology presented here can be used operationally in Mexico and elsewhere, by accounting for fuel-specific aggregation distances, for improving rapid estimates of fire perimeters. These early fire perimeters could be potentially available in near-real time (at every satellite pass with a 12 h latency) in operational fire monitoring GIS systems to support rapid assessment of fire progression and fire suppression planning.

Forest Fuel Drying, Pyrolysis and Ignition Processes during Forest Fire: A Review

Forest ecosystems perform several functions that are necessary for maintaining the integrity of the planet’s ecosystem. Forest fires are thus a significant danger to all living things. Forest fire fighting is a foreground task for modern society. Forest fire prediction is one of the most effective ways to solve this urgent issue. Modern prediction systems need to be developed in order to increase the quality of prediction; therefore, it is necessary to generalize knowledge about the processes occurring during a fire. This article discusses the key features of the processes prior to forest fuel ignition (drying and pyrolysis) and the ignition itself, as well as approaches to their experimental and mathematical modeling.

Analysis of Near-Surface Temperature Lapse Rates in Mountain Ecosystems of Northern Mexico Using Landsat-8 Satellite Images and ECOSTRESS

Mountain ecosystems provide environmental goods, which can be threatened by climate change. Near-Surface Temperature Lapse Rate (NSTLR) is an essential factor used for thermal and hydrological analysis in mountain ecosystems. The aims of the present study were to estimate NSTLR and to identify its relationship with aspect, Local solar zenith angle (LSZA) and Evaporative Stress Index (ESI) for two seasons of the year in a mountain ecosystem at the North of Mexico. Normalized Land Surface Temperature (NLST) was estimated using environmental and topographical variables. LSZA was calculated from slope to consider the effect of solar position. NSTLR was estimated through simple linear models. Observed NSTLR was 9.4 °C km−1 for the winter and 14.3 °C km−1 for the summer. Our results showed variation in NSTLR by season. In addition, aspect, LSZA and ESI also influenced NSTLR regulation. In addition, Northwest and West aspects exhibited the highest NSTLR. LSZA angles closest to 90° were related with a decrease in NSTLR for both seasons. Finally, ESI values associated with less evaporative stress were related to lower NSTLR. These results suggest potential of Landsat-8 LST and ECOSTRESS ESI to capture interactions of temperature, topography, and water stress in complex ecosystems.

Near Real-Time Automated Early Mapping of the Perimeter of Large Forest Fires from the Aggregation of VIIRS and MODIS Active Fires in Mexico

In contrast with current operational products of burned area, which are generally available one month after the fire, active fires are readily available, with potential application for early evaluation of approximate fire perimeters to support fire management decision making in near real time. While previous coarse-scale studies have focused on relating the number of active fires to a burned area, some local-scale studies have proposed the spatial aggregation of active fires to directly obtain early estimate perimeters from active fires. Nevertheless, further analysis of this latter technique, including the definition of aggregation distance and large-scale testing, is still required. There is a need for studies that evaluate the potential of active fire aggregation for rapid initial fire perimeter delineation, particularly taking advantage of the improved spatial resolution of the Visible Infrared Imaging Radiometer (VIIRS) 375 m, over large areas and long periods of study. The current study tested the use of convex hull algorithms for deriving coarse-scale perimeters from Moderate Resolution Imaging Spectroradiometer (MODIS) and Visible Infrared Imaging Radiometer Suite (VIIRS) active fire detections, compared against the mapped perimeter of the MODIS collection 6 (MCD64A1) burned area. We analyzed the effect of aggregation distance (750, 1000, 1125 and 1500 m) on the relationships of active fire perimeters with MCD64A1, for both individual fire perimeter prediction and total burned area estimation, for the period 2012–2108 in Mexico. The aggregation of active fire detections from MODIS and VIIRS demonstrated a potential to offer coarse-scale early estimates of the perimeters of large fires, which can be available to support fire monitoring and management in near real time. Total burned area predicted from aggregated active fires followed the same temporal behavior as the standard MCD64A1 burned area, with potential to also account for the role of smaller fires detected by the thermal anomalies. The proposed methodology, based on easily available algorithms of point aggregation, is susceptible to be utilized both for near real-time and historical fire perimeter evaluation elsewhere. Future studies might test active fires aggregation between regions or biomes with contrasting fuel characteristics and human activity patterns against medium resolution (e.g., Landsat and Sentinel) fire perimeters. Furthermore, coarse-scale active fire perimeters might be utilized to locate areas where such higher-resolution imagery can be downloaded to improve the evaluation of fire extent and impact.

Predicting forest fire kernel density at multiple scales with geographically weighted regression in Mexico

Identifying the relative importance of human and environmental drivers on fire occurrence in different regions and scales is critical for a sound fire management. Nevertheless, studies analyzing fire occurrence spatial patterns at multiple scales, covering the regional to national levels at multiple spatial resolutions, both in the fire occurrence drivers and in fire density, are very scarce. Furthermore, there is a scarcity of studies that analyze the spatial stationarity in the relationships of fire occurrence and its drivers at multiple scales. The current study aimed at predicting the spatial patterns of fire occurrence at regional and national levels in Mexico, utilizing geographically weighted regression (GWR) to predict fire density, calculated with two different approaches -regular grid density and kernel density - at spatial resolutions from 5 to 50 km, both in the dependent and in the independent human and environmental candidate variables. A better performance of GWR, both in goodness of fit and residual correlation reduction, was observed for prediction of kernel density as opposed to regular grid density. Our study is, to our best knowledge, the first study utilizing GWR to predict fire kernel density, and the first study to utilize GWR considering multiple scales, both in the dependent and independent variables. GWR models goodness of fit increased with fire kernel density search radius (bandwidths), but saturation in predictive capacity was apparent at 15-20 km for most regions. This suggests that this scale has a good potential for operational use in fire prevention and suppression decision-making as a compromise between predictive capability and spatial detail in fire occurrence predictions. This result might be a consequence of the specific spatial patterns of fire occurrence in Mexico and should be analyzed in future studies replicating this methodology elsewhere.

Modeling and Mapping Forest Fire Occurrence from Aboveground Carbon Density in Mexico

Understanding the spatial patterns of fire occurrence is key for improved forest fires management, particularly under global change scenarios. Very few studies have attempted to relate satellite-based aboveground biomass maps of moderate spatial resolution to spatial fire occurrence under a variety of climatic and vegetation conditions. This study focuses on modeling and mapping fire occurrence based on fire suppression data from 2005–2015 from aboveground biomass—expressed as aboveground carbon density (AGCD)—for the main ecoregions in Mexico. Our results showed that at each ecoregion, unimodal or humped relationships were found between AGCD and fire occurrence, which might be explained by varying constraints of fuel and climate limitation to fire activity. Weibull equations successfully fitted the fire occurrence distributions from AGCD, with the lowest fit for the desert shrub-dominated north region that had the lowest number of observed fires. The models for predicting fire occurrence from AGCD were significantly different by region, with the exception of the temperate forest in the northwest and northeast regions that could be modeled with a single Weibull model. Our results suggest that AGCD could be used to estimate spatial fire occurrence maps; those estimates could be integrated into operational GIS tools for assistance in fire danger mapping and fire and fuel management decision-making. Further investigation of anthropogenic drivers of fire occurrence and fuel characteristics should be considered for improving the operational spatial planning of fire management. The modeling strategy presented here could be replicated in other countries or regions, based on remote-sensed measurements of aboveground biomass and fire activity or fire suppression records.