Novel Non-Cerevisiae Saccharomyces Yeast Species Used in Beer and Alcoholic Beverage Fermentations

The potential for Scotch Malt Whisky flavour diversification by yeast

Scotch Whisky, a product of high importance to Scotland, has gained global approval for its distinctive qualities derived from the traditional production process, which is defined in law. However, ongoing research continuously enhances Scotch Whisky production and is fostering a diversification of flavour profiles. To be classified as Scotch Whisky, the final spirit needs to retain the aroma and taste of 'Scotch'. While each production step contributes significantly to whisky flavour-from malt preparation and mashing to fermentation, distillation, and maturation-the impact of yeast during fermentation is crucially important. Not only does the yeast convert the sugar to alcohol, it also produces important volatile compounds, e.g. esters and higher alcohols, that contribute to the final flavour profile of whisky. The yeast chosen for whisky fermentations can significantly influence whisky flavour, so the yeast strain employed is of high importance. This review explores the role of yeast in Scotch Whisky production and its influence on flavour diversification. Furthermore, an extensive examination of nonconventional yeasts employed in brewing and winemaking is undertaken to assess their potential suitability for adoption as Scotch Whisky yeast strains, followed by a review of methods for evaluating new yeast strains.

Increasing Higher Alcohols and Acetates in Low-Alcohol Beer by Proteases

The market of non-alcoholic and low-alcohol beer has grown continuously thanks to the advocacy for healthy and responsible drinking. Non-alcoholic and low-alcohol products usually possess less higher alcohols and acetates and more aldehyde off-flavors due to the manufacturing processes. The employment of non-conventional yeasts partially mitigates this problem. In this study, we used proteases to optimize the wort amino acid profile for better aroma production during yeast fermentation. The design of experiments was applied to increase the leucine molar fraction, aiming to boost 3-methylbutan-1-ol and 3-methylbutyl acetate (banana-like aromas). This led to an increase from 7% to 11% leucine in wort after protease treatment. The aroma output in the subsequent fermentation, however, was yeast-dependent. An 87% increase of 3-methylbutan-1-ol and a 64% increase of 3-methylbutyl acetate were observed when Saccharomycodes ludwigii was used. When Pichia kluyveri was employed, higher alcohols and esters from valine and isoleucine were increased: 58% more of 2-methylpropyl acetate, 67% more of 2-methylbutan-1-ol, and 24% more of 2-methylbutyl acetate were observed. Conversely, 3-methylbutan-1-ol decreased by 58% and 3-methylbutyl acetate largely remained the same. Apart from these, the amounts of aldehyde intermediates were increased to a varying extent. The impact of such increases in aromas and off-flavors on the perception of low-alcohol beer remains to be evaluated by sensory analysis in future studies.

Novel Saccharomyces cerevisiae × Saccharomyces mikatae Hybrids for Non-alcoholic Beer Production

The popularity of non-alcoholic beers has been increasing over the past few years. Maltose-negative strains of different genera are frequently used to obtain beers of low alcohol content. S. cerevisiae hybrids with other Saccharomyces species offer interesting inherited flavour characteristics; however, their use in non-alcoholic beer production is rare. In this work, we constructed six hybrids of maltose-negative S. cerevisiae parental strains (modified to produce higher amounts of organic acids) and S. mikatae (wild-type). Growth behaviour, osmotolerance and fermentation features of the offspring were compared with parental strains. One hybrid with mitochondrial DNA inherited from both parents was used to produce non-alcoholic beer in which organic metabolites were evaluated by HPLC and HS-SPME-GC-MS. This hybrid produced non-alcoholic beer (≤0.05% (v/v)) with an increased organic acid content, just as its parent S. cerevisiae, but without producing increased amounts of acetic acid. The beer had a neutral aromatic profile with no negative off-flavours, similar to the beer produced by the parent S. mikatae, which was used for the first time to produce non-alcoholic beer. Overall, both parents and hybrid yeast produced non-alcoholic beers with increased amounts of higher alcohols compared with esters.

New Approaches for the Fermentation of Beer: Non-Saccharomyces Yeasts from Wine

Non-Saccharomyces yeasts represent a very attractive alternative for the production of beers with superior sensory quality since they are able to enhance the flavour of beer. Furthermore, they can produce beers with low ethanol content due to the weak fermentative capacity of a large percentage of non-Saccharomyces species. The objective of this study was to evaluate the ability of 34 non-Saccharomyces yeast strains isolated from Madrilenian agriculture to produce a novel ale beer. The non-Saccharomyces yeast strains were screened at two scales in the laboratory. In the first screening, those with undesirable aromas were discarded and the selected strains were analysed. Thirty-three volatile compounds were analysed by GC, as well as melatonin production by HPLC, for the selected strains. Thirteen strains were then fermented at a higher scale in the laboratory for sensory evaluation. Only yeast strains of the species Schizosaccharomyces pombe and Lachancea thermotolerans were able to complete fermentation. Species such as Torulaspora delbrueckii, Metschnikowia pulcherrima, Wickerhamomyces anomalus, Hanseniaspora vineae, and Hanseniaspora guilliermondii could be used both for production of low ethanol beers and co-fermentation with a Saccharomyces yeast to improve the organoleptic characteristics of the beer. In addition, for these strains, the levels of melatonin obtained were higher than the concentrations found for Saccharomyces strains subjected to the same study conditions. The selected strains can be used in future trials to further determine their viability under different conditions and for different purposes.

Optimization and Purification of Terpenyl Flavor Esters Catalyzed by Black Cumin (Nigella sativa) Seedling Lipase in Organic Media

Geranyl butyrate and citronellyl butyrate esters are industrially important fruity flavors that are being used in food and as a fragrance in cosmetics. Previously terpenyl fruity flavors have been successfully synthesized in organic solvents using crude seedlings enzymes. The purpose of the current study was to standardize reaction parameters for the optimal synthesis of geranyl butyrate using the best chosen black cumin seedling lipase in an organic medium through direct esterification reactions. Geranyl butyrate and citronellyl butyrate esters were identified, quantified through gas chromatography, confirmed through GC-MS, and partiallypurified through the distillation process. Effect of organic solvents (acetonitrile, n-hexane, pentane, heptane, and toluene), alcohol and acid concentrations (0.125–0.3 M), temperature (20–50°C), incubation time (1–72 h), and enzyme concentrations (0.05–0.3 g) were studied on the synthesis of geranyl butyrate using black cumin seedling lipase. The highest conversion yields of ester (96%) were obtained when 0.25 M of geraniol and butyric acid were reacted at 37°C for 48 h in the presence of 0.25 g of crude seedling lipase enzyme in n-hexane. It was concluded that the germinated black cumin seedling lipase proved to be the best among the selected biocatalysts for the synthesis of geranyl butyrate in n-hexane.

Buckwheat and Amaranth as Raw Materials for Brewing, a Review

Globally, beer is considered the most-consumed low-alcohol beverage, it ranks third, after water and tea, in the top sales of these drinks. New types of beer are the result of the influence of several factors, including innovations in science and technology, changing requirements for food consumption of the population, competition between producers, promotion of food for health, flavor, and quality, the limited nature of traditional food resource raw materials, and the interest of producers in reducing production costs. Manufacturers are looking for new solutions for obtaining products that meet the requirements of consumers, authentic products of superior quality, with distinctive taste and aroma. This review proposes the use of two pseudocereals as raw materials in the manufacture of beer: buckwheat and amaranth, focusing on the characteristics that recommend them in this regard. Due to their functional and nutraceutical properties, these pseudocereals can improve the quality of beer-a finished product. Additionally, all types of beer obtained from these pseudocereals are recommended for diets with particular nutritional requirements, especially gluten-free diets. Researchers and producers will continue to improve and optimize the sensory and technological properties of the new types of beer obtained from these pseudocereals.

Brewing Efficacy of Non-Conventional Saccharomyces Non-cerevisiae Yeasts

Consumer demands for new sensory experiences have driven the research of unconventional yeasts in beer. While much research exists on the use of various common Saccharomyces cerevisiae strains as well as non-Saccharomyces yeasts, there exists a gap in knowledge regarding other non-cerevisiae Saccharomyces species in the fermentation of beer, in addition to S. pastorianus. Here, five distinct species of Saccharomyces from the UC Davis Phaff Yeast Culture Collection, as well as one interspecies hybrid from Fermentis, were chosen to ferment 40 L pilot-scale beers. S. kudriavzevii, S. mikatae, S. paradoxus, S. bayanus, and S. uvarum yeasts were used to ferment wort in duplicate pairs, with one fermenter in each pair receiving 10 g/L dry-hop during fermentation. Analytical measurements were made each day of fermentation and compared to controls of SafAle™ US-05 and SafLager™ W 34/70 for commercial brewing parameters of interest. Finished beers were also analyzed for aroma, taste, and mouthfeel to determine the flavor of each yeast as it pertains to brewing potential. All beers exhibited spicy characteristics, likely from the presence of phenols; dry-hopping increased fruit notes while also increasing perceived bitterness and astringency. All of the species in this study displayed great brewing potential, and might be an ideal addition to beer depending on a brewery’s desire to experiment with flavor and willingness to bring a new yeast into their production environment.

Understanding Wine through Yeast Interactions

Wine is a product of microbial activities and microbe–microbe interactions. Yeasts are the principal microorganisms responsible for the evolution and fulfillment of alcoholic fermentation. Several species and strains coexist and interact with their environment and with each other during the fermentation course. Yeast–yeast interactions occur even from the early stages of fermentation, determining yeast community structure and dynamics during the process. Different types of microbial interactions (e.g., mutualism and commensalism or competition and amensalism) may exert positive or negative effects, respectively, on yeast populations. Interactions are intimately linked to yeast metabolic activities that influence the wine analytical profile and shape the wine character. In this context, much attention has been given during the last years to the interactions between Saccharomyces cerevisiae (SC) and non-Saccharomyces (NS) yeast species with respect to their metabolic contribution to wine quality. Yet, there is still a significant lack of knowledge on the interaction mechanisms modulating yeast behavior during mixed culture fermentation, while much less is known about the interactions between the various NS species or between SC and Saccharomyces non-cerevisiae (SNC) yeasts. There is still much to learn about their metabolic footprints and the genetic mechanisms that alter yeast community equilibrium in favor of one species or another. Gaining deeper insights on yeast interactions in the grape–wine ecosystem sets the grounds for understanding the rules underlying the function of the wine microbial system and provides means to better control and improve oenological practices.

Isolation and Identification of a High-Yield Ethyl Caproate-Producing Yeast From Daqu and Optimization of Its Fermentation

Baijiu is an important fermented product in China. A yeast named YX3307 that is capable of producing a large amount of ethyl caproate (EC) was isolated from Daqu, a crude fermentation starter for Baijiu. This yeast was identified as Clavispora lusitaniae on the basis of its morphological properties, physiological and biochemical characteristics, and 26S rDNA sequence. Single-factor experiments were conducted to obtain the optimum fermentation conditions for EC production by YX3307. The highest EC yield (62.0 mg/L) from YX3307 was obtained with the following culture conditions: inoculum size 7.5% (v/v), seed cell age 30 h, sorghum hydrolysate medium (SHM) with a sugar content of 10 Brix and an initial pH of 6.0; incubation at 28°C with shaking at 180 rpm for 32 h; addition of 10% (v/v) anhydrous ethanol and 0.04% (v/v) caproic acid at 32 and 40 h, respectively, static culture at 20°C until 72 h. YX3307 synthesized more EC than ethyl acetate, ethyl lactate, ethyl butyrate, and ethyl octanoate. An intracellular enzyme or cell membrane enzyme was responsible for EC synthesis. YX3307 can produce many flavor compounds that are important for high-quality Baijiu. Thus, it has potential applications in improving the flavor and quality of Baijiu.

Role of Yeasts in the Brewing Process: Tradition and Innovation

Nowadays, in the beer sector, there is a wide range of products, which differ for the technologies adopted, raw materials used, and microorganisms involved in the fermentation processes. The quality of beer is directly related to the fermentation activity of yeasts that, in addition to the production of alcohol, synthesize various compounds that contribute to the definition of the compositional and organoleptic characteristics. The microbrewing phenomenon (craft revolution) and the growing demand for innovative and specialty beers has stimulated researchers and brewers to select new yeast strains possessing particular technological and metabolic characteristics. Up until a few years ago, the selection of starter yeasts used in brewing was exclusively carried out on strains belonging to the genus Saccharomyces. However, some non-Saccharomyces yeasts have a specific enzymatic activity that can help to typify the taste and beer aroma. These yeasts, used as a single or mixed starter with Saccharomyces strains, represent a new biotechnological resource to produce beers with particular properties. This review describes the role of Saccharomyces and non-Saccharomyces yeasts in brewing, and some future biotechnological perspectives.

Dry-Hop Creep Potential of Various Saccharomyces Yeast Species and Strains

Previous research has shown that hops contain enzymes able to hydrolyze unfermentable dextrins into fermentable sugars when added during the dry-hopping process. In the presence of live yeast, these additional fermentable sugars can lead to an over-attenuation of the beer; a phenomenon known as “hop creep”. This study attempts to analyze the effect of different Saccharomyces yeast species and strains on hop creep, with the intent to find an ability to mitigate the effects of dry-hop creep by using a specific yeast. Thirty different yeast species and strains were chosen from commercial and academic collections and propagated for pilot fermentations. Brews were performed at the Anheuser-Busch Research Brewery (1.8 hL, 10 °P, 20 IBU) at UC Davis and split to 40 L cylindroconical fermenters, with one fermenter in each yeast pair receiving 10 g/L Centennial hop pellets towards the end of fermentation. Standard analytical measurements were performed over the course of fermentation, with real degrees of fermentation (RDF) and extract measured on an Anton Paar alcolyzer. In order to preemptively determine the amount of hop creep to be experienced with each unknown fermentation, bench-top fermentations with 20 g/L dry-hops were performed concurrently and compared to the pilot scale fermentations. RDF was significantly higher (p < 0.01) on dry-hopped than non-dry-hopped fermentations beginning two days post dry-hopping to the end of fermentation, with the exceptions of SafAle™ BE-134, a S. cerevisiae var. diastaticus, and UCDFST 11-510, a S. mikatae. No apparent correlation between flocculation and increased RDF was shown in dry-hopped treatments. pH was significantly different between the dry-hopped and non-hopped fermentations (p < 0.05 one day post dry-hop, p < 0.01 for all subsequent days); this may have impacted on additional attenuation. No yeasts in this study indicated their use for mitigation of dry-hop creep, but this is a first look at beer fermentation for some of the chosen yeasts. The results also present a new perspective on how hop creep varies in fermentation.