CO2 supply is a powerful tool to control homoacetogenesis, chain elongation and solventogenesis in ethanol and carboxylate fed reactor microbiomes

Anaerobic fermentation technology enables the production of medium chain carboxylates and alcohols through microbial chain elongation. This involves steering reactor microbiomes to yield desired products, with CO2 supply playing a crucial role in controlling ethanol-based chain elongation and facilitating various bioprocesses simultaneously. In the absence of CO2 supply (Phase I), chain elongation predominantly led to n-caproate with a high selectivity of 96 Cmol%, albeit leaving approximately 80% of ethanol unconverted. During this phase, C. kluyveri and Proteiniphilum-related species dominated the reactors. In Phase II, with low CO2 input (2.0 NmL L-1 min-1), formation of n-butyrate, butanol, and hexanol was stimulated. Increasing CO2 doses in Phase III (6 NmL L-1 min-1) led to CO2 utilization via homoacetogenesis, coinciding with the enrichment of Clostridium luticellarii, a bacterium that can use CO2 as an electron acceptor. Lowering CO2 dose to 0.5 NmL L-1 min-1 led to a shift in microbiome composition, diminishing the dominance of C. luticellarii while increasing C. kluyveri abundance. Additionally, other Clostridia, Proteiniphilum, and Lactobacillus sakei-related species became prevalent. This decrease in CO2 load from 6 to 0.5 NmL L-1 min-1 minimized excessive ethanol oxidation from 30%-50% to 0%-3%, restoring a microbiome favoring net n-butyrate consumption and n-caproate production. The decreased ethanol oxidation coincided with the resurgence of hydrogen formation at partial pressures above 1%. High concentrations of butyrate, caproate, and ethanol in the reactor, along with low acetate concentration, promoted the formation of butanol and hexanol. It is evident that CO2 supply is indispensable for controlling chain elongation in an open culture and it can be harnessed to stimulate higher alcohol formation or induce CO2 utilization as an electron acceptor.

Simultaneous medium chain carboxylic acids and 1,3-propanediol production in a bioaugmented lactate-based chain elongation induced with glycerol

The objective was to investigate the impact of the bioaugmentation on chain elongation process using glycerol, lactate and lactose as substrates in an open culture fermentation. In the batch trials the highest selectivity for chain elongation product, i.e. caproate, was observed in trials inoculated with co-culture of Megasphaera elsdenii and Eubacterium limosum grown on glycerol (28.6%), and in non-bioaugmented open culture run on lactose + lactate (14.8%). The results showed that E. limosum, out of two bioaugmented strains, was able to survive in the open culture. A continuous open culture fermentation of glycerol led to caproate and 1,3-propanediol (1,3-PDO) formation, while lactate addition led to 1,3-PDO and short chain carboxylates production. Moving the process into batch mode triggered even-carbon chain elongation. Presence of E. limosum promoted odd-carbon chain elongation and valerate production. Imaging flow cytometry combined with machine learning enabled the discrimination of Eubacterium cells from other microbial strains during the process.

Microbial Recycling of Polylactic Acid Food Packaging Waste into Carboxylates via Hydrolysis and Mixed-Culture Fermentation

To establish a circular economy, waste streams should be used as a resource to produce valuable products. Biodegradable plastic waste represents a potential feedstock to be microbially recycled via a carboxylate platform. Bioplastics such as polylactic acid food packaging waste (PLA-FPW) are theoretically suitable feedstocks for producing carboxylates. Once feasible, carboxylates such as acetate, n-butyrate, or n-caproate can be used for various applications like lubricants or building blocks for making new bioplastics. In this study, pieces of industrial compostable PLA-FPW material (at 30 or 60 g/L) were added to a watery medium with microbial growth nutrients. This broth was exposed to 70 °C for a pretreatment process to support the hydrolysis of PLA into lactic acid at a maximum rate of 3.0 g/L×d. After 21 days, the broths of the hydrolysis experiments were centrifugated and a part of the supernatant was extracted and prepared for anaerobic fermentation. The mixed microbial culture, originating from a food waste fermentation bioprocess, successfully fermented the hydrolyzed PLA into a spectrum of new C2-C6 multi-carbon carboxylates. n-butyrate was the major product for all fermentations and, on average, 6.5 g/L n-butyrate was obtained from 60 g/L PLA-FPW materials. The wide array of products were likely due to various microbial processes, including lactate conversion into acetate and propionate, as well as lactate-based chain elongation to produce medium-chain carboxylates. The fermentation process did not require pH control. Overall, we showed a proof-of-concept in using real bioplastic waste as feedstock to produce valuable C2-C6 carboxylates via microbial recycling.

Formate-induced CO tolerance and methanogenesis inhibition in fermentation of syngas and plant biomass for carboxylate production

BACKGROUND

Production of monocarboxylates using microbial communities is highly dependent on local and degradable biomass feedstocks. Syngas or different mixtures of H2, CO, and CO2 can be sourced from biomass gasification, excess renewable electricity, industrial off-gases, and carbon capture plants and co-fed to a fermenter to alleviate dependence on local biomass. To understand the effects of adding these gases during anaerobic fermentation of plant biomass, a series of batch experiments was carried out with different syngas compositions and corn silage (pH 6.0, 32 °C).

RESULTS

Co-fermentation of syngas with corn silage increased the overall carboxylate yield per gram of volatile solids (VS) by up to 29% (0.47 ± 0.07 g gVS-1; in comparison to 0.37 ± 0.02 g gVS-1 with a N2/CO2 headspace), despite slowing down biomass degradation. Ethylene and CO exerted a synergistic effect in preventing methanogenesis, leading to net carbon fixation. Less than 12% of the electrons were misrouted to CH4 when either 15 kPa CO or 5 kPa CO + 1.5 kPa ethylene was used. CO increased the selectivity to acetate and propionate, which accounted for 85% (electron equivalents) of all products at 49 kPa CO, by favoring lactic acid bacteria and actinobacteria over n-butyrate and n-caproate producers. Inhibition of n-butyrate and n-caproate production by CO happened even when an inoculum preacclimatized to syngas and lactate was used. Intriguingly, the effect of CO on n-butyrate and n-caproate production was reversed when formate was present in the broth.

CONCLUSIONS

The concept of co-fermenting syngas and plant biomass shows promise in three aspects: by making anaerobic fermentation a carbon-fixing process, by increasing the yields of short-chain carboxylates (propionate and acetate), and by minimizing electron losses to CH4. Moreover, a model was proposed for how formate can alleviate CO inhibition in certain acidogenic bacteria. Testing the fermentation of syngas and plant biomass in a continuous process could potentially improve selectivity to n-butyrate and n-caproate by enriching chain-elongating bacteria adapted to CO and complex biomass.

Effect of external acetate on lactate-based carboxylate platform: Shifted lactate overloading limit and hydrogen co-production

Chain elongation is an anaerobic biotechnological process that converts short chain carboxylates and an electron donor (e.g. ethanol, lactate) into more valuable medium chain carboxylates. Caproate production in lactate-based chain elongation is gaining popularity, however, the relation between lactate (electron donor) and acetate (electron acceptor) has not yet been fully elucidated. Herein, for the first time, the effect of an external acetate on the lactate-based chain elongation in a continuously-fed bioreactor was tested to verify how the external acetate would affect the product spectrum, gas production, as well as stability and efficiency of carboxylates production. Periodic fluctuations in caproate production were observed in bioreactor continuously fed with lactate as a sole carbon source due to the lack of an electron acceptor (acetate) and low chain elongation performance. The recovery of stable caproate production (68.9 ± 2.2 mmol C/L/d), total lactate consumption, and high hydrogen co-production (748 ± 76 mL_H2/d) was observed as an effect of the addition of an external acetate. The lactate conversion with the external acetate in the second bioreactor ensured stable and dominant caproate production from the beginning of the process. Moreover, despite the continuous lactate overloading in the process with external acetate, stable caproate production was achieved (71.7 ± 2.4 mmol C/L/d) and previously unobserved hydrogen production occurred (213 ± 30 mL_H2/d). Thus, external electron acceptor addition (i.e. acetate) was proposed as an effective method for stable lactate-based caproate production. Microbiological analysis showed the dominance of microbes closely related to Ruminococcaceae bacterium CPB6 and Acinetobacter throughout the process. Co-occurrence networks based on taxon abundances and process parameters revealed microbial sub-networks responding to lactate concentrations.

Reactor microbiome enriches vegetable oil with n-caproate and n-caprylate for potential functionalized feed additive production via extractive lactate-based chain elongation

BACKGROUND

Biotechnological processes for efficient resource recovery from residual materials rely on complex conversions carried out by reactor microbiomes. Chain elongation microbiomes produce valuable medium-chain carboxylates (MCC) that can be used as biobased starting materials in the chemical, agriculture and food industry. In this study, sunflower oil is used as an application-compatible solvent to accumulate microbially produced MCC during extractive lactate-based chain elongation. The MCC-enriched solvent is harvested as a potential novel product for direct application without further MCC purification, e.g., direct use for animal nutrition. Sunflower oil biocompatibility, in situ extraction performance and effects on chain elongation were evaluated in batch and continuous experiments. Microbial community composition and dynamics of continuous experiments were analyzed based on 16S rRNA gene sequencing data. Potential applications of MCC-enriched solvents along with future research directions are discussed.

RESULTS

Sunflower oil showed high MCC extraction specificity and similar biocompatibility to oleyl alcohol in batch extractive fermentation of lactate and food waste. Continuous chain elongation microbiomes produced the MCC n-caproate (nC6) and n-caprylate (nC8) from L-lactate and acetate at pH 5.0 standing high undissociated n-caproic acid concentrations (3 g L^-1). Extractive chain elongation with sunflower oil relieved apparent toxicity of MCC and production rates and selectivities reached maximum values of 5.16 ± 0.41 g nC6 L^-1 d^-1 (MCC: 11.5 g COD L^-1 d^-1) and 84 ± 5% (e^- eq MCC per e^- eq products), respectively. MCC were selectively enriched in sunflower oil to concentrations up to 72 g nC6 L^-1 and 3 g nC8 L^-1, equivalent to 8.3 wt% in MCC-enriched sunflower oil. Fermentation at pH 7.0 produced propionate and n-butyrate instead of MCC. Sunflower oil showed stable linoleic and oleic acids composition during extractive chain elongation regardless of pH conditions. Reactor microbiomes showed reduced diversity at pH 5.0 with MCC production linked to Caproiciproducens co-occurring with Clostridium tyrobutyricum, Clostridium luticellarii and Lactobacillus species. Abundant taxa at pH 7.0 were Anaerotignum, Lachnospiraceae and Sporoanaerobacter.

CONCLUSIONS

Sunflower oil is a suitable biobased solvent to selectively concentrate MCC. Extractive reactor microbiomes produced MCC with improved selectivity and production rate, while downstream processing complexity was reduced. Potential applications of MCC-enriched solvents may include feed, food and biofuels purposes.