Multi-Analytical Approach for Asbestos Minerals and Their Non-Asbestiform Analogues: Inferences from Host Rock Textural Constraints

Asbestos in soil and water: A review of analytical techniques and methods

In this review the main standard and novel analytical techniques and methods for sampling, sample preparation, detection and quantification of asbestos in soil and water are described, compared and discussed in terms of advantages and limitations. An overview of common analytical methods applied for identification and quantification of airborne asbestos is preliminary provided, as they have been widely studied, due to the well-known human pathologies related to fibers inhalation. Despite the presence of asbestos in soil and water may also constitute a health risk, it has been less investigated and regulated. For these environmental matrices, the methods adopted at international and national scale, covering the whole analytical process, from sampling to management of data, are reported in depth, highlighting their limitations like sensitivity, reliability and reproducibility. Finally, different promising novel/unconventional methods, that may substitute or support traditional ones for asbestos detection both in environmental and anthropic matrices, are presented and critically evaluated.

Natural occurrence of asbestos in serpentinite quarries from Southern Spain

The nevado-filábride complex (NFC) (southern Spain) is well known for its widespread mining and quarrying activities. Serpentinite and metabasite rocks are extracted, processed and traded as building and ornamental stones. Due to the possible presence of natural occurrence of asbestos (NOA) in these rocks, the aim of this paper is to conduct an in-depth characterisation of fibrous minerals. To this aim, seven serpentinite rock samples were collected in four quarries located in the Sierra Nevada and Sierra de los Filabres (South-eastern Spain), which were then analysed by X-ray powder diffraction (XRPD), scanning electron microscopy combined with energy-dispersive spectrometry (SEM/EDS), differential scanning calorimetry (DSC), derivative thermogravimetry (DTG) and X-ray synchrotron microtomography (SR-µCT). It is essential to investigate asbestos minerals from both scientific and legal perspective, especially for public health officials that implement occupational health and safety policies, in order to safeguard the health of workers (e.g. quarry excavations, road yards, civil constructions, building stones).

X-ray synchrotron microtomography: a new technique for characterizing chrysotile asbestos

Over the last decades, many studies have been conducted on rocks containing Naturally Occurring Asbestos (NOA) to determine the potential health risks to exposed neighboring populations. It is difficult to accurately characterize the asbestos fibres contained within the rocks as conventional techniques are not effective and have drawbacks associated with the disturbance of the sample under study. X-ray synchrotron microtomography (SR-μCT) supplemented with polarized light microscope (PLM), scanning electron microscopy analysis combined with energy dispersive spectrometry (SEM/EDS), electron probe micro-analysis (EPMA) were used for identifying asbestos fibres in a mineral matrix. As a case study, we analyzed a representative set of veins and fibrous chrysotile that fills the veins, taken from massive serpentinite outcrops (Southern-Italy). We were able to identify respirable chrysotile fibres (regulated asbestos) within the serpentinite matrix. SR-μCT of NOA veins achieved the resolution and reconstructed 3D structures of infill chrysotile asbestos fibres and other phase structures that were not resolvable with PLM, SEM or EPMA. Moreover, due to differences in chemical composition between veins and matrix, the data obtained enabled us to evaluate the vein shapes present in the massive serpentinite matrix. In particular, iron and aluminum distribution variations between veins and matrix induce different radiation absorption patterns thus permitting a detailed image-based 3D geometric reconstruction. The advantages of the SR-μCT technique as well as limitation of conventional methods are also discussed. These analytical approaches will be used for conducting future research on NOA of other minerals, which exhibit asbestiform and non-asbestiform habits within veins, including asbestos amphiboles.

The Concentration of Asbestos Fibers in Bulk Samples and Its Variation with Grain Size

The aim of this work was to establish whether asbestos fibers homogeneously occur in the different fractions ground from naturally occurring asbestos lithotypes, and to calculate the contribution of fibers from each fraction to the overall concentration in the sample. Serpentinite, metabasalt, calc-schist, clay, debris material, and soil, were addressed. Grain size fractions below 20 mm were sieved at 2 mm and 0.106 mm; they were then were mechanically milled to obtain powders below 0.106 mm. The three powdered fractions were characterized using a scanning electron microscope coupled with energy dispersive spectroscopy following M.D. 06/09/94. The still in use (in some cases), Italian normative M.D. 161/2012 specifies that analyses must be performed on the <2 mm fraction and the concentration (mg/kg) correlated with the weight of the whole sample <20 mm. However, the fiber counts yielded asbestos concentrations 50–60% lower compared with total asbestos analyses according to the new R.P.D. 120/2017. Consequently, there is a need to standardize the normative worldwide regulations for the management of asbestos-containing materials, by re-evaluation of sample preparation and quantification of asbestos.