A Portable, Cost-Effective and User-Friendly Instrument for Colorimetric Enzyme-Linked Immunosorbent Assay and Rapid Detection of Aflatoxin B1

Novel Sensor Approaches of Aflatoxins Determination in Food and Beverage Samples

The rapid quantification of toxins in food and beverage products has become a significant issue in overcoming and preventing many life-threatening diseases. Aflatoxin-contaminated food is one of the reasons for primary liver cancer and induces some tumors and cancer types. Advancements in biosensors technology have brought out different analysis methods. Therefore, the sensing performance has been improved for agricultural and beverage industries or food control processes. Nanomaterials are widely used for the enhancement of sensing performance. The enzymes, molecularly imprinted polymers (MIP), antibodies, and aptamers can be used as biorecognition elements. The transducer part of the biosensor can be selected, such as optical, electrochemical, and mass-based. This review explains the classification of major types of aflatoxins, the importance of nanomaterials, electrochemical, optical biosensors, and QCM and their applications for the determination of aflatoxins.

An Electrochemical Immunosensor Based on Chitosan-Graphene Nanosheets for Aflatoxin B1 Detection in Corn

We reported a highly efficient electrochemical immunosensor utilizing chitosan-graphene nanosheets (CS-GNs) nanocomposites for the detection of aflatoxin B1 (AFB1) in corn samples. The CS-GNs nanocomposites, serving as a modifying layer, provide a significant specific surface area and biocompatibility, thereby enhancing both the electron transfer rate and the efficiency of antibody immobilization. The electrochemical characterization was conducted utilizing both differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). Moreover, the antibody concentration, pH, antibody immobilization time, and immunoreaction time, were optimized. The results showed that the current change (ΔI) before and after the immunoreaction demonstrated a strong linear relationship (R2=0.990) with the AFB1 concentration, as well as good specificity and stability. The linear range extended from 0.05 to 25 ng/mL, with a detection limit of 0.021 ng/mL (S/N=3). The immunosensor exhibited a recovery rate ranging from 97.3% to 101.4% in corn samples, showing a promising performance using an efficient method, and indicating a remarkable prospect for the detection of fungal toxins in grains.

Fabrication of microtiter plate on paper using 96-well plates for wax stamping

Paper-based analytical devices have prominently emerged as a group of diagnostic tools with prospective to eliminate the expensive, time-consuming, and intricate analytical methodologies. Wax printing has been a dominant technique to fabricate hydrophobic patterns on paper for fluid control, but the discontinuation of commercial solid ink printers has begun a genesis of alternate wax patterning strategies. In this study, a simple and rapid fabrication methodology for realizing a 96-well microtiter plate on paper has been developed. The method involves the use of commercially available polystyrene microplates as a stamp for wax patterning. The technique further eradicates the requirement of customized stamps and the step of heating paper substrates for creating wax barriers. Thus, wax stamped paper microplates can be used for a wide range of bioanalytical tests maneuvering reduced generation of non-biodegradable waste, minimal reagent usage, and inexpensive readout strategies. The viability of the fabricated platform has been assessed by colorimetric detection of glutathione using 3,3',5,5'-tetramethylbenzidine-H₂O₂ redox system. RGB analysis of the colorimetric response showed a linear concentration range from 0 to 90 µM (R ² = 0.989) along with a detection limit of 28.375 µM.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10404-022-02606-3.

An efficient aggregation-induced electrochemiluminescent immunosensor by using TiO2 nanoparticles as coreaction accelerator and energy donor for aflatoxin B1 detection

Herein, we fabricated a label-free ECL immunosensor for aflatoxin B₁ (AFB₁) detection. In this system, a small organic aggregation-induced electrochemiluminescence luminophore, 2,5-di-tetraphenylethylene-ylthiazolo [5,4-d] thiazole, was designed, named TPETTZ. Polyaniline-wrapped TiO₂ nanoparticles (PANI/TiO₂ NPs) complex was synthesized through one-step in situ oxidation polymerization of aniline, and performed excellent electrical conductivity and abundant amino groups. As an ECL accelerator, TiO₂ nanoparticles (TiO₂ NPs) promoted the oxidation of tri-n-propylamine (TPA) to generate more TPA^•; in addition, it also acted as a donor to improve the ECL intensity of TPETTZ (acceptor) through electrochemiluminescence resonance energy transfer (ECL-RET). Encouraged by the above, under the existence of TPA, TPETTZ displayed a strong and continuously stable ECL_anode signal due to the introduction of PANI/TiO₂ NPs. Therefore, the immunosensor was constructed for AFB₁ detection based on the quenching effect of target on the ECL signal, and a linearly decreasing ECL signal was obtained as the increasement of AFB₁ in the range of 75 fg/mL to 100 ng/mL, with a lower detection limit of 27.5 fg/mL. Moreover, the as-prepared sensing platform performed a satisfactory anti-interference, stability, and reproducibility, and appeared a good accuracy in walnut sample analysis, presenting a promising application in the future.

Editorial to Special Issue-Research on Isolation and Intelligent Detection Methods of Foodborne Pathogens

Foodborne illnesses pose a significant threat worldwide to public health [...].