Effect of the Post-Harvest Processing on Protein Modification in Green Coffee Beans by Phenolic Compounds

Effects of cherries Sanitization methods and fermentation times on quality parameters of coffee beans

For the first time, the dual effect of coffee cherry sanitization methods to control the microbial load in processing and the influence of fermentation time on coffee quality parameters was evaluated. Two assays were carried out by wet processing: I) Sanitization of the coffee cherry (ST1: Unclassified processed cherries; ST2: Classified and sanitized cherries with drinking water; ST3: Classified and sanitized cherries with a chemical agents and II) Fermentation times (FT1: 12 h; FT2: 24 h; FT3: 48 h; FT4: 72 h and FT5: 96 h). pH, temperature, and dissolved oxygen were monitored during fermentation. Counts of Lactic Acid Bacteria - LAB, mesophiles, and yeasts were carried out on the coffee mass before and after fermentation. Caffeine and chlorogenic acid contents were determined by HPLC-DAD and the sensory profile by methodology for specialty coffees (SCA). The main findings showed that: sanitization with Timsen® did not significantly influence the evolution of pH during fermentation (p > 0.05), but it can reduce to a small extent the action of LAB at the end of the process. It was observed that the temperature of the coffee mass tends to balance with the ambient temperature, with significant effects (p < 0.05) of sanitization (ST2 and ST3) on the stability of this variable during fermentation. Timsen® as a disinfectant affected microbial populations and improved the sensory profile in the cup. In prolonged coffee fermentations (FT3, FT4 and FT5), the pH of the coffee mass tended to stabilize after 36 h, regardless of the process time. Likewise, a correlation was evident between a higher microbial load correlated with better sensory profiles in FT4 and FT5. Neither the sanitization process nor the fermentation time significantly affected the caffeine and chlorogenic acid contents of the coffee, both in its green and roasted states. Consequently, the sanitization of cherry coffee with Timsen® and prolonged fermentation times favor the safety and coffee final quality in the cup.

Formation of Cysteine Adducts with Chlorogenic Acid in Coffee Beans

The post-harvest processing of coffee beans leads to a wide range of reactions involving proteins. The formation of crosslinks between proteins and phenolic compounds present in high concentrations of coffee beans represents one of the most challenging and still not fully characterized reactions. The aim of this work was to assess the presence of products from such reactions in coffee samples, focusing on the adducts between cysteine and chlorogenic acids (CQAs). For this purpose, 19 green and 15 roasted coffee samples of the Coffea arabica, Coffea canephora, and Coffea liberica varieties were selected for this study and basically characterized. Then, targeted liquid chromatography mass spectrometry (LC-MS/MS) methods were developed to assess the formation of adducts between CQA and cysteine, glutathione, and N-acetylcysteine as the amino acid and peptide models, and quantified such adducts in coffee samples. The results of the characterization showed a heterogeneous distribution of the protein content (8.7-14.6%), caffeine (0.57-2.62 g/100 g), and antioxidant capacity (2-4.5 g ascorbic acid/100 g) in Arabica, Canephora, and Liberica samples. Glutamic acid, arginine, and proline were found to be the major amino acids, while 5-CQA (38-76%), 3-CQA (4-13%), and 4-CQA (4-13%) were the most abundant CQA derivatives of all coffee varieties. The model experiments for adduct formation demonstrated that cysteine binds to CQA via thiol groups and 5-CQA initially isomerizes to 3- and 4-CQA, depending on the conditions, allowing cysteine to bind to two different sites on 3-, 4- or 5-CQA molecules, thus, forming six different Cys-CQA adducts with m/z 476. The reaction was more favored at pH 9, and the adducts proved to be stable up to 90 °C for 10 min and up to 28 days at room temperature. The relative quantification of adducts showed peak area values ranging from 1100 to 3000 in green coffee bean samples, while no adducts were detected in roasted coffee beans. Overall, this work was the first attempt to demonstrate the presence of Cys-CQA adducts in coffee beans and paves the way for further investigations of such adduct formation at the protein level.

Limited enzymatic hydrolysis of green coffee protein as a technique for preparing new functional food components

Valorisation of side-streams in food production has become an important booster for increased sustainability in food production. The objective of this work was to study and improve the functional properties of green coffee (GC) protein. Extraction of defatted GC meal by using PVPP slightly increased protein yield and significantly decreased the amount of covalently and non-covalently bound CQA, therefore decreasing the antioxidant activity of the meal. Peptic hydrolysis at pH 1.5 led to a significantly higher degree of hydrolysis (DH) than at pH 3. Sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE) showed that the molecular weights of peptides of GC protein hydrolysates were in the range of 11-60 kDa, while peptides were in the range of 500-5000 Da using matrix-assisted laser desorption/ionization-time of flight mass spectroscopy (MALDI-TOF MS). Additionally, the enzymatic hydrolysis significantly improved the antioxidant activity of the GC protein. Finally, the results suggest that enzymatic hydrolysis with pepsin is an effective technique to provide bioactive compounds. The works presented in our manuscript may help in further exploiting the potential use of green coffee beans for food, cosmetic or pharmaceutical industry.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05646-3.

Effect of Three Post-Harvest Methods at Different Altitudes on the Organoleptic Quality of C. canephora Coffee

C. canephora (syn. C. robusta) is distinctive due to its rising industrial value and pathogen resistance. Both altitude and post-harvest methods influence coffee cup quality; however, modest information is known about this coffee species. Therefore, the aim of this study was to determine the relationship between four different altitudes and post-harvest processes (dry, honey, and wet) to the improvement of the organoleptic quality of the C. canephora congolensis and conilon drink. For dry processing, congolensis and conilon showed the lowest scores in terms of fragrance/aroma, flavour, aftertaste, salt–acid, bitter–sweet, and body. Above 625 m, coffees from dry, honey, and wet processes increased scores in their sensory attributes, but there was no difference at such high altitudes when comparing post-harvest samples. Dry-processed coffee samples had total scores over 80 points at high altitudes. Conilon was perceived to have the best sensory attributes at high altitudes using honey processing. In general, the wet-processed congolensis and conilon samples had a tastier profile than dry-processed ones.

Targeted Bottom-Up Mass Spectrometry Approach for the Relative Quantification of Post-Translational Modification of Bovine κ-Casein during Milk Fermentation

κ-casein (κ-CN) is one of the key components in bovine milk, playing a unique role in the structuration of casein micelles. It contains in its chemical structure up to sixteen amino acid residues (mainly serine and threonine) susceptible to modifications, including glycosylation and phosphorylation, which may further be formed during milk processing. In this study, changes in post-translational modification (PTM) of κ-CN during bovine milk fermentation were investigated. One-to-five-day fermented milk samples were produced. A traditional bottom−up proteomics approach was used to establish a multiple-reaction monitoring (MRM) method for relative quantification of κ-CN PTM. Endoproteinase Glu-C was found to efficiently digest the κ-CN molecule. The developed LC-MS method was validated by performing assessments of linearity, precision, repeatability, reproducibility, limit of detection (LOD), and limit of quantification (LOQ). Among the yielded peptides, four of them containing serine and threonine residues were identified and the unmodified as well as the modified variants of each of them were relatively quantified. These peptides were (1) IPTINTIASGEPTSTTE [140, 158], (2) STVATLE [162, 168], (3) DSPE [169, 172], and (4) INTVQVTSTAV [180, 190]. Distribution analysis between unmodified and modified peptides revealed that over 50% of κ-CN was found in one of its modified forms in milk. The fermentation process further significantly altered the composition between unmodified/modified κ-CN, with glycoslaytion being predominant compared to phosphorylation (p < 0.01). Further method development towards α and β-CN fractions and their PTM behavior would be an asset to better understand the changes undergone by milk proteins and the micellar structure during fermentation.

Influence of pre-and post-harvest factors on the organoleptic and physicochemical quality of coffee: a short review

The coffee quality is affected by 40% pre-harvest, 40% post-harvest, and 20% export handling. Besides, future risks for the coffee industry are related with climate change and increased pathogens. Considering the importance of the aroma profile and unique flavor of Arabica coffee, most literature focuses on this variety because of the high market share; however, nowadays, Robusta coffee stands out for its increasing industrial value and resistance to drought. In this review, both species are emphasized, highlighting sensory aspects of possible new products mixed with a higher proportion of Robusta given market trends for bitter beverages. In the present work, a systematic search of peer-reviewed literature evaluates how the coffee cup quality and physicochemical characteristics of Robusta and Arabica are influenced by environmental, agronomic, and further processing factors.

Applications of Tandem Mass Spectrometry (MS/MS) in Protein Analysis for Biomedical Research

Mass Spectrometry (MS) allows the analysis of proteins and peptides through a variety of methods, such as Electrospray Ionization-Mass Spectrometry (ESI-MS) or Matrix-Assisted Laser Desorption Ionization-Mass Spectrometry (MALDI-MS). These methods allow identification of the mass of a protein or a peptide as intact molecules or the identification of a protein through peptide-mass fingerprinting generated upon enzymatic digestion. Tandem mass spectrometry (MS/MS) allows the fragmentation of proteins and peptides to determine the amino acid sequence of proteins (top-down and middle-down proteomics) and peptides (bottom-up proteomics). Furthermore, tandem mass spectrometry also allows the identification of post-translational modifications (PTMs) of proteins and peptides. Here, we discuss the application of MS/MS in biomedical research, indicating specific examples for the identification of proteins or peptides and their PTMs as relevant biomarkers for diagnostic and therapy.