Rheological Properties of Wheat-Flaxseed Composite Flours Assessed by Mixolab and Their Relation to Quality Features

Influence of roasted flaxseed marc flour on rheological, structural, fermentation, water distribution, and migration properties of wheat dough

Roasted flaxseed (RF) marc, which is a by-product obtained from RF oil extraction, has high nutritional value. This study evaluated the impact of RF marc flour on rheological, structural, fermentation, water distribution, and migration properties of the wheat dough. Results showed that adding RF into wheat flour (WF) could effectively increase the water absorption in the dough and retard the retrogradation of starch. The fermentation results revealed that adding RF could improve the gas retention coefficient of dough. Compared to the dough prepared with WF, the doughs enriched with RF had higher tan δ values (ratio of loss modulus G″ to storage modulus G'), indicating a more liquid-like property. The mobility of tightly bound and free water in dough was decreased by adding RF, whereas the distribution of free water was increased. On the one hand, adding RF would dilute the gluten content in dough, resulting in a weaker protein network. On the other hand, the dietary fiber and proteins in RF could offset the gluten dilution effect to some extent. Overall, the results suggested that the substitution level of RF in WF should be below 25% to avoid serious dough quality deterioration, and the RF-WF blended flour could be a potential ingredient to produce wheat products with moist taste. These findings could be useful for guiding the future usage of RF marc in wheat-based products.

Investigation of physicochemical and sensory characteristics of low calorie sponge cake made from flaxseed mucilage and flaxseed flour

This research aimed to extract flaxseed mucilage (FM) and investigate its rheological properties (static and dynamic tests) compared with animal oil. In the next stage, the D-optimal design was applied to investigate the effect of FM (0-60%) and FF (0-30%) replacements with animal oil and cake flour, respectively on the sponge cake's physicochemical, textural, and sensory properties. According to the flow behavior test, FM showed Newtonian behavior while animal oil had pseudoplastic behavior. The results of the dynamic test showed with an increase in frequency, the loss modulus (G״) and storage modulus (G') of samples increased. However, G' was higher than G״ in all samples. By replacement of FM and FF, the moisture content, water activity, antioxidant capacity, crumb hardness, and cohesiveness of the samples increased while springiness, crust hardness, and specific volume decreased (P < 0.05). Lightness of samples with replacement of FF decreased (P < 0.05). The overall acceptance score was enhanced with an increase in FM substitution while it was decreased with the replacement of FF (P < 0.05). The amounts of fat, calories, and peroxide values were decreased in sponge cake with the incorporation of FF and FM (P < 0.05). In general, the substitution of FM (60%) and FF (28%) in the cake formulation as an optimized sample to make new products with low-calorie content is possible without significant decreases in product quality.

The Impacts of Standardized Flaxseed Meal (XanFlax) on the Physicochemical, Textural, and Sensory Properties of Muffins

Flaxseed is becoming increasingly popular as a superfood due to its many health benefits. While flaxseed is considered an oilseed, flaxseed meal (the by-product of flaxseed oil extraction) also contains many nutritional compounds not found in the oil. This study explored the use of a Canadian flaxseed (Linum usitatissimum L.) meal product to fortify bakery foods and improve their nutritional properties. Muffins were made using a control recipe as well as four different formulations that included varying amounts of a standardized flaxseed meal supplement called XanFlax (5, 10, 20, and 40%). The physicochemical properties of the muffins, including their texture, color, sugar content, pH, specific gravity, loss rate, and moisture, were evaluated. Additionally, the sensory attributes contributing to muffin quality were thoroughly examined. The lightness (L*) and yellowness (b*) of the muffins, which were highest in the control group at 82.22 and 34.69, respectively, decreased as the amount of XanFlax increased (p < 0.05). Additionally, the redness (a*) of the muffins increased as the amount of XanFlax increased (p < 0.05). The muffins' sugar content (2.00 brix%) remained consistent across all treatments and controls except for those prepared with 20% XanFlax (2.17 brix%). As the amount of XanFlax powder increased, the pH of the muffins increased significantly. The moisture content in the muffins was highest at 23.71 ± 0.79% in the 10% XanFlax treatment and lowest at 22.06 ± 0.30% in the 40% XanFlax treatment. The muffins enriched with 5% XanFlax had an average height of 5.35 cm and volume of 131.33 mL, surpassing the results for the muffins made with other formulas (p < 0.05). Additionally, the cohesiveness and gumminess of the muffins tended to increase with the addition of XanFlax. The most favorable attributes, namely the appearance, flavor, taste, texture, and overall acceptance, were consistently associated with the 5% and 10% XanFlax treatments (p < 0.05). This study marks the first time a standardized flaxseed gum product, XanFlax, has been described in a functional baking application.

Composition, processing, and quality control of whole flaxseed products used to fortify foods

Whole flaxseed (flour) as a good source of omega-3 fatty acid and phytochemicals with excellent nutritional and functional attributes has been used to enrich foods for health promotion and disease prevention. However, several limitations and contemporary challenges still impact the development of whole flaxseed (flour)-enriched products on the global market, such as naturally occurring antinutritional factors and entrapment of nutrients within food matrix. Whole flaxseed (flour) with different existing forms could variably alter the techno-functional performance of food matrix, and ultimately affect the edible qualities of fortified food products. The potential interaction mechanism between the subject and object components in fortified products has not been elucidated yet. Hence, in this paper, the physical structure and component changes of flaxseed (flour) by pretreatments coupled with their potential influences on the edible qualities of multiple fortified food products were summarized and analyzed. In addition, several typical food products, including baked, noodle, and dairy products were preferentially selected to investigate the potential influencing mechanisms of flaxseed (flour) on different substrate components. In particular, the altered balance between water absorption of flaxseed protein/gum polysaccharides and the interruption of gluten network, lipid lubrication, lipid-amylose complexes, syneresis, and so forth, were thoroughly elucidated. The overall impact of incorporating whole flaxseed (flour) on the quality and nutritional attributes of fortified food products, coupled with the possible solutions against negative influences are aimed. This paper could provide useful information for expanding the application of whole flaxseed (flour) based on the optimal edible and nutritional properties of fortified food products.

Research on the Potential Use of Grape Seed Flour in the Bakery Industry

Grape seeds are one of the most accessible by-products of the wine industry in large quantities (about 2.4 million t/year). Numerous researchers have shown that grape seeds have a high potential for use as a functional ingredient in the food industry due to their high content of protein, fiber, minerals, and polyphenols. The aim of the paper is to evaluate the possibilities of using grape seed flour (GSF) in the bakery industry from both chemical and rheological points of view. Research shows that grape seed flour contains about 42 times more fiber than wheat flour and approximately 9 times more calcium, 8 times more magnesium, and 2 times more potassium. To assess this potential, four samples of bread from flour mixtures with 3%, 5%, 7%, and 9% (w/w) degree of replacement with GSF were prepared, analyzed, and compared with a control sample from 100% wheat flour. From a rheological point of view, the baking qualities deteriorate: the water absorption capacity (CH) decreases from 58.2% to 55.8%, the dough stability increases from 8.50 min to 9.83 min, the α slope varies from −0.066 Nm/min to −0.104 Nm/min, the β slope increases from 0.576 Nm/min to 0.630 Nm/min, and the γ slope varies from −0.100 Nm/min to −0.198 Nm/min. The sensory analyses performed by the panel of evaluators enclosed the sensorial characteristics of the samples with 3% and 5% GSF between the two control samples made from flour types 480 and 1250. The conclusions show that the sample containing 7% and 9% are unsatisfactory from rheological and sensorial points of view and the samples with 3% and 5% can be considered a fiber source and a Cu source, respectively, and are rich in Zn.

Nutritional, Sensory, Texture Properties and Volatile Compounds Profile of Biscuits with Roasted Flaxseed Flour Partially Substituting for Wheat Flour

The study aimed at assessing effects of partial replacement (0–40%) of wheat flour with roasted flaxseed flour (RFSF) on the quality attributes of biscuits. Nutritional, antioxidative, volatile and sensory properties, as well as texture analysis and the contents of macroelements and microelement were studied. Increasing RFSF content in biscuits resulted in a significant increase (p < 0.05) in protein (from 8.35% to 10.77%), fat (from 15.19% to 28.34%) and ash (from 1.23% to 2.60%) while the hardness and spread factor of the biscuits decreased with the increased level of roasted flaxseed flour. Moreover, the addition of 40% RFSF registered a positive influence on the fibre content of the final baked biscuits, increasing its value about 6.7-fold than in the control sample. Total phenolic content, antioxidant activity and biscuits’ aroma volatile profile increased their amounts with RFSF addition. The nutritional, textural and sensorial results of the present study demonstrated that 25% RFSF could be added in the biscuits manufacturing without affecting the biscuits aftertaste, offering promising healthy and nutritious alternative to consumers.

Impact of Whole and Ground-by-Knife and Ball Mill Flax Seeds on the Physical and Sensorial Properties of Gluten Free-Bread

The aim of the study was to compare the physical and sensory properties of gluten-free bread with the addition of whole and ground flax seeds. The grinding process of flax seeds was carried out using a knife grinder and ball mill. After short-knife grinding (20 s) (GM-200, Retsch), the seeds were divided into whole (average particle size 0.634 mm), coarse (769 mm) and fine (0.328 mm) flour, and these flours were additionally ground with ball milling (60 s) (Pulverisette 6, Fritsh). The grinding energy of seeds was evaluated. Baking of gluten-free bread was performed with 10% addition of different forms of whole and ground flaxseeds. The colour, volume, texture and sensory parameters of bread were evaluated. In addition, the crumbling index of bread was developed and defined as the percentage share of crumbed pieces of the bread slice in relation to the mass of the entire crumb sample cut out together with crumbs. Specific grinding energy of flaxseeds during short (20 s) knife grinding was equal to 109.5 J·g−1, and additional ball milling (60 s) caused significantly (α = 0.05) more than 4 times higher energy consumption, but more reduced particles of whole (0.497 mm), coarse (0.621 mm) and fine flour (0.308 mm) were obtained. After adding ground seeds, it was necessary to add more water to the dough, which increased dough yield from 220% to 240% and even to 260% when ball milling of coarse flax flour was applied. The most significant increase in the volume of bread and the most reduced crumbling was observed for breads with addition of coarse fractions of flaxseeds ground with ball milling. In comparison with the control sample of gluten-free bread; significant improvement in bread volume, textureand sensory evaluation was observed after using both whole and ground flaxseeds. Furthermore, the crumbling index was related to an organoleptic evaluation and can be used in bread quality assessment as a complement to instrumental texture measurements.

Current Trends in the Realm of Baking: When Indulgent Consumers Demand Healthy Sustainable Foods

The term "baked goods" encompasses multiple food products made from flour (typically wheat flour) [...].