Extraction and Characterization of Self-Assembled Collagen Isolated from Grass Carp and Crucian Carp

Therapeutic potency of marine collagen/pectin scaffolds - Fabrication, characterization and evaluation

Skin is an important vital organ that must be given proper care and protection from external damage and harmful microbes. If injured, it must be treated with an ideal wound dressing material with potent hemostatic and non-toxic properties. In the present study, fish collagen (FC) was extracted from the fins and tails of Black pomfret (Parastromateus niger). The isolated fish collagen was homogenized with pectin (P) and freeze dried to obtain fish collagen/pectin (FC/P) scaffolds. Scanning electron microscopic analysis showed the porous nature of scaffolds with intermittent holes. UV-Visible and Fourier infrared spectroscopic analyses demonstrated the physicochemical properties of FC/P scaffolds. Hemolytic assay performed using human blood demonstrated the percentage of hemolysis as 0.5 %. In vitro blood clotting assay carried out to determine the hemostatic behaviour displayed the formation of blood clot within 60 s in the presence of FC/P scaffolds. 95 % of cells were viable with the highest concentration of FC/P scaffold used for MTT (3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide) assay. Scratch wound assay demonstrated complete closure of wound in FC/P scaffold treated cells after 48 h of treatment. Chick embryo chorioallantoic membrane (CAM) assay showed the development of new blood vessels within 6 h of incubation with the FC/P scaffolds, thereby proving their angiogenic potency. These results indicate the potential use of FC/P scaffolds as effective biomaterials for tissue regenerative applications.

Biomimetic Mineralized Hydroxyapatite-Fish-Scale Collagen/Chitosan Nanofibrous Membranes Promote Osteogenesis for Periodontal Tissue Regeneration

Commercial mammalian collagen-based membranes used for guided tissue regeneration (GTR) in periodontal defect repair still face significant challenges, including ethical concerns, cost-effectiveness, and limited capacity for periodontal bone regeneration. Herein, an enhanced biomimetic mineralized hydroxyapatite (HAp)-fish-scale collagen (FCOL)/chitosan (CS) nanofibrous membrane was developed. Specifically, eco-friendly and biocompatible collagen extracted from grass carp fish scales was co-electrospun with CS to produce a biomimetic extracellular matrix membrane. An enhanced biomimetic mineralized HAp coating provided abundant active calcium and phosphate sites, which promoted cell osteogenic differentiation, and showed greater in vivo absorption. In vitro experiments demonstrated that the HAp-FCOL/CS membranes exhibited desirable properties with no cytotoxicity, provided a mimetic microenvironment for stem cell recruitment, and induced periodontal ligament cell osteogenic differentiation. In rat periodontal defects, HAp-FCOL/CS membranes significantly promoted new periodontal bone formation and regeneration. The results of this study indicate that low-cost, eco-friendly, and biomimetic HAp-FCOL/CS membranes could be promising alternatives to GTR membranes for periodontal regeneration in the clinic.

Physicochemical and thermal properties of pepsin- and acid-soluble collagen isolated from the body wall of sea cucumbers (Stichopus hermanni)

The main objective of this work was to characterize the acid-soluble collagen (ASC) and pepsin-soluble collagen (PSC) from the body wall of the sea cucumber scientifically called, Stichopus hermanni. For the extraction of ASC and PSC, the pre-treated sea cucumber body walls were subjected to 0.5 M acetic acid and 5 g L-1 pepsin, respectively. The yield of ASC (7.30% ± 0.30%) was found to be lower than the PSC (23.66% ± 0.15%), despite both ASC and PSC having similar chemical compositions except for the quantity of protein. The collagens produced from ASC and PSC show maximum peaks on ultraviolet-visible spectroscopic profiles at wavelengths of 230 and 235 nm, respectively, with no significant difference in the maximum temperature (Tmax ) of the extracted ASC and PSC. The ASC's coloration was whiter than that of the PSC. As a result, the collagen obtained from the body wall of the sea cucumber showed promise for usage as a substitute for collagen derived from marine sources. PRACTICAL APPLICATION: The two most popular methods of collagen extraction were acid hydrolysis and enzymatic hydrolysis. To determine whether the extracted collagen is a suitable substitute for animal collagen in different industries, it is required to characterize its physicochemical qualities. This study discovered a new application for marine collagen in the food industry: The sea cucumber has collagen with a greater yield in pepsin extraction with good physicochemical qualities.

Collagen and gelatin: Structure, properties, and applications in food industry

Food-producing animals have the highest concentration of collagen in their extracellular matrix. Collagen and gelatin are widely used in food industry due to their specific structural, physicochemical, and biochemical properties, which enable them to improve health and nutritional value as well as to increase the stability, consistency, and elasticity of food products. This paper reviews the structural and functional properties including inherent self-assembly, gel forming, water-retaining, emulsifying, foaming, and thickening properties of collagen and gelatin. Then the colloid structures formed by collagen such as emulsions, films or coatings, and fibers are summarized. Finally, the potential applications of collagen and gelatin in muscle foods, dairy products, confectionary and dessert, and beverage products are also reviewed. The objective of this review is to provide the current market value, progress as well as applications of collagen and its derivatives in food industry.

Chitosan-based packaging films with an integrated antimicrobial peptide: Characterization, in vitro release and application to fresh pork preservation

Chitosan (CS) films were developed incorporating peptide HX-12C. The films were studied to determine their microstructures, physical properties, release properties of peptide HX-12C and functional properties. The results indicated that there may be hydrogen bonding interactions between CS and peptide HX-12C, thereby creating a homogeneous internal microstructure and lower crystallinity (10.8-12.8 %). Compared with CS film, CS-HX-12C films displayed lower light transmission, MC (20.8-19.9 %), WVP (8.82-8.59 × 10^-11·g·m^-1·s^-1·Pa^-1), OTR (0.015-0.037 cc/(m².day)) and higher WS (15.7-32.4 %) values. Moreover, controlled-release experiments showed that pH, ionic strength and temperature could all significantly affect the release of peptide HX-12C from the films. Finally, the increase of pH value and TVC and lipid oxidation of fresh pork were delayed due to the treatment with CS-2%HX-12C film. However, incorporating peptide HX-12C into CS films did not improve the mechanical properties of the films and their effects against protein oxidation. Our results suggest that the CS-based antimicrobial packaging films integrated with peptide HX-12C exhibit the potential for fresh pork preservation.

Characterization of Acid- and Pepsin-Soluble Collagen Extracted from the Skin of Purple-Spotted Bigeye Snapper

Fish processing waste is a prospective source of collagen and a cost-effective environmental pollutant. The skin of the purple-spotted bigeye snapper (Priacanthus tayenus) was extracted utilising various acid soluble collagens (ASC) including acetic acid (AAC), lactic acid (LAC), citric acid (CAC) and pepsin soluble collagens (PSC). In this study, PSC (6.65%) had the highest collagen yield, followed by AAC (5.79%), CAC (4.15%), and LAC (3.19%). The maximum temperatures (Tmax) denaturation of AAC, LAC, CAC, and PSC were 31.4, 31.7, 31.5, and 33.2 °C, respectively. UV-VIS absorption spectra showed all extracted collagens had a range of absorbance at 230 nm, due to the presence of glycine, proline, hydroxyproline, and triple-helical collagen. Additionally, they exhibited amide A, B, amide I, II, and III peaks. SDS−PAGE identified all extracted collagens as type I. The PSC had a significantly higher (p < 0.05) hydroxyproline content than acidic extraction 66.3 ± 1.03 (mg/g sample). Furthermore, all samples were extremely soluble in acetic conditions at pH 5, and all collagen was soluble in NaCl up to 3% (w/v). Therefore, PSC was the best treatment since it did not impact collagen triple helical and acetic acid yielded the most collagen in ASC extraction. Overall, the analysis revealed that fish skin waste might be used as an alternate source of collagen in diverse applications, particularly in food applications.

Improving the properties of fish skin collagen/silk fibroin dressing by chemical treatment for corneal wound healing

Natural biomaterials are crucial in ocular tissue engineering because they allow cells to proliferate, differentiate, and stratify while maintaining the typical epithelial phenotype. In this study, membranes as dressings were formed from silk fibroin and collagen (Co) extracted from fish skin and then modified with carbodiimide chemical cross linker in different concentrations. The samples were evaluated by different analyses such as structural, physical (optical, swelling, denaturation temperature, degradation), mechanical, and biological (viability, cell adhesion, immunocytochemistry) assays. The results showed that all membranes have excellent transparency, especially with higher silk fibroin content. Increasing the cross linker concentration and the ratio of silk fibroin to Co increased the denaturation temperature and mechanical strength and, conversely, reduced the degradation rate and cell adhesion. The samples did not show a significant difference in toxicity with increasing cross linker and silk fibroin ratio. In general, samples with a low silk fibroin ratio combined with cross linker can provide desirable properties as a membrane for corneal wound healing.

Collagen Membrane Derived from Fish Scales for Application in Bone Tissue Engineering

Guided tissue/bone regeneration (GTR/GBR) is currently the main treatment for alveolar bone regeneration. The commonly used barrier membranes in GTR/GBR are collagen membranes from mammals such as porcine or cattle. Fish collagen is being explored as a potential substitute for mammalian collagen due to its low cost, no zoonotic risk, and lack of religious constraints. Fish scale is a multi-layer natural collagen composite with high mechanical strength, but its biomedical application is limited due to the low denaturation temperature of fish collagen. In this study, a fish scale collagen membrane with a high denaturation temperature of 79.5 °C was prepared using an improved method based on preserving the basic shape of fish scales. The fish scale collagen membrane was mainly composed of type I collagen and hydroxyapatite, in which the weight ratios of water, organic matter, and inorganic matter were 20.7%, 56.9%, and 22.4%, respectively. Compared to the Bio-Gide^® membrane (BG) commonly used in the GTR/GBR, fish scale collagen membrane showed good cytocompatibility and could promote late osteogenic differentiation of cells. In conclusion, the collagen membrane prepared from fish scales had good thermal stability, cytocompatibility, and osteogenic activity, which showed potential for bone tissue engineering applications.

Isolation, biochemical characterization, and development of a biodegradable antimicrobial film from Cirrhinus mrigala scale collagen

Collagen is a promising candidate for food and pharmaceutical applications due to its excellent biocompatibility, low antigenicity, and controlled biodegradability; however, its heavy price restricts its utilization. Fish scales generated during the processing are generally regarded as waste material and an environmental pollutant, though they are a promising source of collagen. In the present study, Cirrhinus mrigala scales were demineralized and extracted for acid-soluble collagen (ASC) using acetic acid, with a collagen yield of 2.7%. UV-Vis spectra, SDS-PAGE, FTIR analyses, and amino acid composition confirmed the type I nature of the collagen extracted. The denaturation temperature of the collagen was found to be 30.09 °C using differential scanning calorimetry (DSC). The collagen was highly soluble at acidic pH and lower NaCl concentrations while its solubility was lowered in alkaline conditions and NaCl concentrations above 0.5 M. The collagen exhibited good emulsifying potential with an emulsion activity index (EAI) and emulsion stability index (ESI) of 21.49 ± 0.22 m² g^-1 and 15.67 ± 0.13 min, respectively. Owing to the good physicochemical characteristics of the extracted collagen, collagen-chitosan-neem extract (CCN) films were prepared subsequently which showed good antimicrobial activity against Bacillus subtilis NCIM 2635, Staphylococcus aureus NCIM 2654, Escherichia coli NCIM 2832, and Pseudomonas aeruginosa NCIM 5032, suggesting the potential of collagen in the development of antimicrobial films. These results demonstrate that the collagen from fish waste could be valorized and used effectively along with chitosan and neem extract for the synthesis of novel biodegradable films with antimicrobial efficacy.

Preparation and Evaluation of the Curative Effect of Blue Shark (Prionace glauca) Skin Collagen Composite Gel in a Rat Oral Ulcers Model

Objective: To evaluate the curative effect of blue shark skin collagen composite gel on oral mucosal ulcer using the rat oral ulcers model stimulated by glacial acetic acid. Methods: Collagen from blue shark skin was isolated and physiochemically characterized by FTIR, SDS-PAGE and scanning electron microscopy (SEM). Seventy standard male rats were divided into seven groups. The surface and the area of the ulcer were observed and calculated daily. After 12 days of administration, rats in the model group and the control group were killed and the ulcer and surrounding tissues were cut to pieces about one mm3 size. The specimens were stained with 10% formalin solution, paraffinembedded sections, HE staining and light microscope were used to observe the histopathological changes in ulcer tissues. Results: The high-dose group had the fastest ulcer healing effects after 12 days of treatment with blue shark skin collagen composite gel. The composite gel was found to significantly accelerate the healing of oral ulcers in a dose-dependent manner. Conclusion: The blue shark skin collagen composite gel in this study may be a good biomedical material candidate for the treatment of oral ulcers in the near future. Potential of other marine fish skin collagen comples on healing oral ulcers should be also considered.

Current Insights into Collagen Type I

Collagen type I (Col-I) is unique due to its high biocompatibility in human tissue. Despite its availability from various sources, Col-I naturally mimics the extracellular matrix (ECM) and generally makes up the larger protein component (90%) in vasculature, skin, tendon bone, and other tissue. The acceptable physicochemical properties of native Col-I further enhance the incorporation of Col-I in various fields, including pharmaceutical, cosmeceutical, regenerative medicine, and clinical. This review aims to discuss Col-I, covering the structure, various sources of availability, native collagen synthesis, current extraction methods, physicochemical characteristics, applications in various fields, and biomarkers. The review is intended to provide specific information on Col-I currently available, going back five years. This is expected to provide a helping hand for researchers who are concerned about any development on collagen-based products particularly for therapeutic fields.

Hybrid Collagen Hydrogel/Chondroitin-4-Sulphate Fortified with Dermal Fibroblast Conditioned Medium for Skin Therapeutic Application

The current strategy for rapid wound healing treatment involves combining a biomaterial and cell-secreted proteins or biomolecules. This study was aimed at characterizing 3-dimensional (3D) collagen hydrogels fortified with dermal fibroblast-conditioned medium (DFCM) as a readily available acellular skin substitute. Confluent fibroblasts were cultured with serum-free keratinocyte-specific medium (KM1 and KM2) and fibroblast-specific medium (FM) to obtain DFCM. Subsequently, the DFCM was mixed with collagen (Col) hydrogel and chondroitin-4-sulphate (C4S) to fabricate 3D constructs termed Col/C4S/DFCM-KM1, Col/C4S/DFCM-KM2, and Col/C4S/DFCM-FM. The constructs successfully formed soft, semi-solid and translucent hydrogels within 1 h of incubation at 37 °C with strength of <2.5 Newton (N). The Col/C4S/DFCM demonstrated significantly lower turbidity compared to the control groups. The Col/C4S/DFCM also showed a lower percentage of porosity (KM1: 35.15 ± 9.76%; KM2: 6.85 ± 1.60%; FM: 14.14 ± 7.65%) compared to the Col (105.14 ± 11.87%) and Col/C4S (143.44 ± 27.72%) constructs. There were no changes in both swelling and degradation among all constructs. Fourier transform infrared spectrometry showed that all groups consisted of oxygen–hydrogen bonds (O-H) and amide I, II, and III. In conclusion, the Col/C4S/DFCM constructs maintain the characteristics of native collagen and can synergistically deliver essential biomolecules for future use in skin therapeutic applications.

Regeneration of native collagen from hazardous waste: chrome-tanned leather shavings by acid method

The collagens (COL2, COL4, and COL5) were extracted from chrome-tanned leather shavings via three distinctive routes of acid method. The dechroming degree of COL2 extracted with the easiest operation was the highest (95.6% ± 1.2%) and the yield exceeded 90%; however, the total amount of acid was the most and the cost was the highest. In the second route, although the three-step dechroming process brought cumbersome operation, the dechroming degree and yield of COL4 were 90.5% ± 0.8% and 92.2% ± 0.6%, respectively, and the acid amount was less than that in the first route. For COL5, the dechroming degree and yield was the lowest; nevertheless, this route had the advantages of lowest cost and simpler operation. Electrophoretic patterns showed that all the collagens contained α1, α2, and β chains without low molecular weight components and were close to those of type I collagen. Compared with native collagen extracted from fresh calf skin, the regenerated collagens also maintained unique triple helix conformation determined via ultraviolet, infrared spectra and X-ray diffraction, confirmed by the similar values of AIII/A1455 and Δν. Additionally, the collagens existed in the form of fibrils with D-period pattern of ~ 67 nm. Furthermore, the denaturation temperatures of COL2, COL4, and COL5 were 71.2, 79.1, and 85.4 °C, respectively, which were relevant to the tighter arrangement of fibrils with the increased chromium content.