Reducing Oil Separation in Ready-to-Use Therapeutic Food

Ready-to-use therapeutic/supplementary foods from local food resources: Technology accessibility, program effectiveness, and sustainability, a review

Ready-to-Use Therapeutic Food (RUTF) or Ready-to-Use Supplementary Food (RUSF) has been widely used in home-based treatment for severely and moderately acute malnourished children. These programs showed positive results in short term nutritional recovery in children, which were reported in some research settings. Nowadays, the RUTF/RUSF formulation has been improved using a variety of RUTF/RUSF from locally available food ingredients. This paper aims to review the essential aspects of the development and provision of RUTF/RUSF made from local food resources and monitor program effectiveness that warrants the program's sustainability. The modified recipes of RUTF/RUSF were developed following the international dietary guidelines for the rehabilitation of severely and moderately acute malnourished children. The local production of RUTF/RUSF provided some benefits that include empowering the local community, consideration of the common eating pattern, promoting the diversification of food consumption, strengthening food security, as well as supporting the sustainability of RUTF/RUSF production. Results of the PRISMA-based systematic literature review revealed various ingredient developments and processing techniques which could improve the product characteristics and sensory evaluation. RUTF/RUSF in local food production provided different food carriers (e.g., biscuits, wafers) and seemed to be more readily accepted by the children. Furthermore, the program sustainability of RUTF/RUSF depends on a continuous ingredients supply and support from the local government. The findings presented the importance of development of such food supplements based on the local food resources and with improved technology for prevention and rehabilitation of malnourished children.

Improving the Technology of Primary Purification of the Safflower Oil Using Secondary Products of Processing on a Biological Basis

Safflower oil is a very valuable product for the body and human health. It is rich in macro- and microelements, vitamins and minerals, and also has antioxidant properties. The primary purification of safflower oil is an important stage of its production and directly affects the quality of the final product and its storage ability. Purifying safflower oil using a combination of filtration and sedimentation processes in an experimental cone-shaped centrifuge is a new direction in its processing. The purpose of this study was to determine the effects of flax fiber as a filter material for safflower oil. The Akmai variety of the safflower was tested. The results showed that the quality indicators of safflower oil before and after filtration through flax fiber are different. The amount of unsaturated fatty acids such as oleic (18.31 ± 0.874%) and cis-linoleic acid (82.52 ± 1.854%) increased, as well as the content of arginine (2.1), tyrosine (0.57), methionine (0.4), cystine (2.5), tryptophan (2.6), and other amino acids (in oil g per 100 g of protein). The increase in the total amount of phenols (322.12 ± 6 mgEAG/kg of oil) was observed, which directly caused the higher antioxidant activity (42.65 ± 8%) of the safflower oil. These results demonstrate that flax fiber can enrich safflower oil. To find the optimal conditions for safflower oil centrifugation in a cone-shaped sedimentary-filtering centrifuge, the thickness of the flax fiber and the distance between the inner and outer perforated filter rotor were tested. It was found that the optimal and effective thickness of the flax fiber is 1.5 × 107 nm, while the thickness of the sediment is 0.5 × 107 nm.

Docosahexaenoic Acid Stability in Ready-to-Use Therapeutic Food

Ready-to-use therapeutic food (RUTF) is used to treat young children diagnosed with severe acute malnutrition. RUTF with low and balanced linoleic and alpha-linolenic acid, plus omega-3 docosahexaenoic acid (DHA), supports long-term cognitive recovery. DHA is prone to degradation due to peroxidation, possibly exacerbated by the iron inherently in RUTF. Our goals were to prepare benchtop and manufacturing scale of RUTF formulations that include DHA and measure its retention. Twenty-seven RUTF formulas with base ingredients, including oats, high oleic or commodity peanuts, and encapsulated or oil-based DHA at various levels were prepared at benchtop scale, followed by seven months of climate-controlled storage. These pilot samples had similar relative DHA retention. At the manufacturing scale, DHA was added at one of two stages in the process, either at the initial or the final mixing stage. Samples taken at preliminary or later steps show that less than 20% of DHA added at the early stages disappeared prior to packaging for any recipe tested. Overall, our data indicate that most DHA included in RUTF is retained in the final product and that DHA is best retained when added at the latest manufacturing stage.

Assessment of Natural Waxes as Stabilizers in Peanut Butter

Manufacturers add sugar and fully hydrogenated vegetable oils to peanut butter to avoid its oil separation during storage. Unfortunately, hydrogenated oils are significant sources of saturated fats, and reducing their consumption is challenging for food scientists without affecting the desired characteristics of food products. Therefore, in a preliminary study, 1%, 1.5%, and 2% of three natural waxes (rice bran, carnauba, and beeswax) were added to the natural peanut butter to test their efficacy as a stabilizer. Rice bran and carnauba wax added to peanut butter presented a higher elastic modulus (G’) and lower oil separation percentages than beeswax. However, no significant differences were found between the different percentages of waxes. Thus, in the final experiments, 1% of these selected waxes (rice bran and carnauba waxes) were added directly to the roasted ground peanut. Due to the difficulty of adding high melting point waxes to the peanut butter, a second experiment added wax oleogel (rice-bran and carnauba wax) to defatted peanut flour. After four weeks of storage, all of the samples were examined for their texture (TPA) and oil separation. The sample with directly added bran wax had the highest values for spreadability and firmness, and the lowest oil separation, which was 11.94 ± 0.90 N·s⁻¹, 19.60 ± 0.71 N·s⁻¹, and 0.87 ± 0.05%, respectively. In the peanut flour sample, the spreadability, firmness, and separated oil of the rice bran wax oleogel added sample were 46.95 ± 0.99 N·s⁻¹, 66.61 ± 0.93 N, and 1.57 ± 0.07%, respectively. However, the textural properties of the rice bran wax oleogel added sample were close to the commercial peanut butter (natural and creamy). Therefore, the results indicate that the rice bran wax oleogel could be the potential replacement of the fully hydrogenated oil as a stabilizer.

Texture and flavor evaluation of peanut butter stabilized with natural waxes

Natural peanut butter was stabilized with 1.0%-2.0% (w/w) beeswax (BW), candelilla wax (CLW), rice bran wax (RBW), or sunflower wax (SFW). The appearance, spreadability, mouthfeel, and flavor attributes of these samples were evaluated by a trained sensory panel using commercial stabilized peanut butter and a sample stabilized with hydrogenated cottonseed oil as references. The waxes and their blend ratio significantly (p < 0.05) influenced appearance, spreadability, firmness, mouthfeel, and flavor attributes. Samples with 1.5%-2.0% CLW, or 1.0%-1.5% RBW had the fewest differences in appearance and texture from the reference and commercial samples. However, an off-flavor was attributed to 1.5% or higher CLW. Samples stabilized with BW or with 1.0%-1.5% RBW had the fewest difference in flavor compared to the reference sample. Overall, samples stabilized with 1.0%-1.5% RBW scored closest to the commercial and reference samples. The response of CLW, RBW, and SFW (which was only evaluated for appearance and spreadability) indicates that amounts of these waxes could be tailored in different products to achieve a product with desirable texture and flavor as well as stability to oil loss. PRACTICAL APPLICATION: This research provides information that could be used by food companies that make seed or nut butters as spreads or as ingredients for use in foods. It shows the impact of the use of four types of waxes as stabilizers, at commercially relevant levels (< 3.0%), and at levels previously shown to be effective for stabilization, on the firmness, spreadability, and other texture and flavor attributes, and thus provides a starting point for optimization for commercial product specifications.