Identification of Cold Spots Using Non-Destructive Hyperspectral Imaging Technology in Model Food Processed by Coaxially Induced Microwave Pasteurization and Sterilization

Dried Beetroots: Optimization of the Osmotic Dehydration Process and Storage Stability

In this study, beetroots were osmotically dehydrated in sugar beet molasses. The input parameters of the drying process were varied: temperature (20 °C, 40 °C, and 60 °C), time (1 h, 3 h, and 5 h), and concentration of sugar beet molasses (40%, 60%, and 80%). Basic quality indicators were determined for the dried beetroot samples: dry matter content, water loss, solid gain, mineral and betaine content, and phenols and flavonoids, as well as antioxidant potential. After optimizing the results, favorable drying parameters were selected: temperature 60 °C, molasses concentration 70%, and processing time 5 h. According to the optimal drying conditions, the beetroots were dried and stored at 4 °C for 28 days. Half of the dried samples were coated with an edible biopolymer coating based on Camelina sativa oilcake, while the other half of the samples remained uncoated. The sustainability study aimed to confirm the effects of the biopolymer coating on the quality and sustainability of the osmotically dried beetroots.

Applications of novel processing technologies to enhance the safety and bioactivity of milk

Bioactive compounds in food can have high impacts on human health, such as antioxidant, antithrombotic, antitumor, and anti-inflammatory activities. However, many of them are sensitive to thermal treatments incurred during processing, which can reduce their availability and activity. Milk, including ovine, caprine, bovine, and human is a rich source of bioactive compounds, including immunoglobulins, vitamins, and amino acids. However, processing by various novel thermal and non-thermal technologies has different levels of impacts on these compounds, according to the studies reported in the literature, predominantly in the last 10 years. The reported effect of these technologies either covers microbial inactivation or the bioactive composition; however, there is a lack of comprehensive compilation of studies that compare the effect of these technologies on bioactive compounds in milk (especially, caprine and ovine) to microbial inactivation at similar settings. This research gap makes it challenging to conclude on the specific processing parameters that could be optimized to achieve targets of microbial safety and nutritional quality at the same time. This review covers the effect of a wide range of thermal and non-thermal processing technologies including high-pressure processing, pressure-assisted thermal sterilization, pulsed-electric field treatment, cold plasma, microwave-assisted thermal sterilization, ultra-high-pressure homogenization, ultrasonication, irradiation on the bioactive compounds as well as on microbial inactivation in milk. Although a combination of more than one technology could improve the reduction of bacterial contaminants to meet the required food safety standards and retain bioactive compounds, there is still scope for research on these hurdle approaches to simultaneously achieve food safety and bioactivity targets.

In-vitro study on the effectiveness of microwave sterilization in odontostomatology

BACKGROUND

Dental practice is subjected to biologic risk on a daily basis, a risk that could affect both operators and patients. The aim of this study was to observe that the use of protective devices and medical devices allows to limit and eliminate this risk, especially in the case of cross infections.

METHODS

The methods of disinfection of surfaces and instruments are different and could include both physical and chemical methods. In this in-vitro study the effectiveness of sterilization of microwave methods was assessed. In this study microwave sterilization with a 1800W protocol for 5 minutes has been performed.

RESULTS

Once the bacterial contamination of some dental instruments was carried out, and left the latter in culture medium, the disinfection phase was carried out, by inserting the instruments in a microwave chamber. These new sterilization protocols allow to obtain surfaces or instruments sterilization in a short time.

CONCLUSIONS

Even though it cannot be used with all materials, the use of this method has excellent properties for the sterilization of dental medical instruments, even if with lower performance than the conventional autoclave.

Development of Bacterial Spore Pouches as a Tool to Evaluate the Sterilization Efficiency-A Case Study with Microwave Sterilization Using Clostridium sporogenes and Geobacillus stearothermophilus

In this study, novel spore pouches were developed using mashed potato as a food model inoculated with either Geobacillus stearothermophilus or Clostridium sporogenes spores. These spore pouches were used to evaluate the sterilization efficiency of Coaxially induced microwave pasteurization and sterilization (CiMPAS) as a case study. CiMPAS technology combines microwave energy (915 MHz) along with hot water immersion to sterilize food in polymeric packages. The spore pouches were placed at pre-determined specific locations, especially cold spots in each food tray before being processed using two regimes (R-121 and R-65), which consisted of 121 °C and 65 °C at 12 and 22 kW, respectively, followed by recovery and enumeration of the surviving spores. To identify cold spots or the location for inoculation, mashed potato was spiked with Maillard precursors and processed through CiMPAS, followed by measurement of lightness values (*L-values). Inactivation equivalent to of 1-2 Log CFU/g and >6 Log CFU/g for Geobacillus stearothermophilus and Clostridium sporogenes spores, respectively was obtained on the cold spots using R-121, which comprised of a total processing time of 64.2 min. Whereas, inactivation of <1 and 2-3 Log CFU/g for G. stearothermophilus and C. sporogenes spores, respectively on the cold spots was obtained using R-65 (total processing time of 68.3 min), whereas inactivation of 1-3 Log CFU/g of C. sporogenes spores was obtained on the sides of the tray. The results were reproducible across three processing replicates for each regime and inactivation at the specific locations were clearly distinguishable. The study indicated a strong potential to use spore pouches as a tool for validation studies of microwave-induced sterilization.