Synthesis of Magnetic Metal-Organic Frame Material and Its Application in Food Sample Preparation

Using Magnetic Molecularly Imprinted Polymer Technology for Determination of Fish Serum Glucose Levels

In this study, a highly efficient magnetic molecularly imprinted polymer nanocomposite material was prepared using multi-walled carbon nanotubes as carriers. The characterization of the obtained nanocomposite material was conducted using Fourier transform infrared spectroscopy, a vibrating sample magnetometer, a thermogravimetric analyzer, a scanning electron microscope, and a transmission electron microscope. The adsorption properties of the nanocomposite material were evaluated through adsorption experiments, including static adsorption, dynamic adsorption, and selective recognition studies. The prepared nanocomposite material, serving as a selective adsorbent, was applied in magnetic solid-phase extraction. Subsequently, the derivatized samples were analyzed for glucose in fish serum using liquid chromatography-tandem mass spectrometry. Under optimal conditions, the detection limit was 0.30 ng/mL, the quantitation limit was 0.99 ng/mL, satisfactory spiked recovery rates were obtained, and the relative standard deviation was less than 1.1%. Using 2-deoxy-D-ribose as the template molecule and a structural analog of glucose allowed us to eliminate the potential template leakage in qualitative and quantitative analyses, effectively avoiding the issues of false positives and potential quantitative errors, compared to traditional methods. A method for detecting glucose levels in fish serum based on molecularly imprinted polymer technology has been successfully developed to determine the stress and health levels of fish.

Recent Progress on Green New Phase Extraction and Preparation of Polyphenols in Edible Oil

With the proposal of replacing toxic solvents with non-toxic solvents in the concept of green chemistry, the development and utilization of new green extraction techniques have become a research hotspot. Phenolic compounds in edible oils have good antioxidant activity, but due to their low content and complex matrix, it is difficult to achieve a high extraction rate in a green and efficient way. This paper reviews the current research status of novel extraction materials in solid-phase extraction, including carbon nanotubes, graphene and metal-organic frameworks, as well as the application of green chemical materials in liquid-phase extraction, including deep eutectic solvents, ionic liquids, supercritical fluids and supramolecular solvents. The aim is to provide a more specific reference for realizing the green and efficient extraction of polyphenolic compounds from edible oils, as well as another possibility for the future research trend of green extraction technology.

Greener production of a starch-based nanohybrid material (core-shell) for the simultaneous extraction of persistent organic pollutants in shrimp samples

Here, a novel nanohybrid material (Ag@CD@ANS) based on oat starch was produced, characterized, and applied to extract persistent organic pollutants in a shrimp sample. By the characterization experiments, Ag@CD@ANS was successfully synthesized. The functionalization of the material by 1,2-naphthoquinone-4-sulphonic acid (ANS) was confirmed using the infrared technique and CHN elemental analysis. The isotherm study showed that the material has a high adsorption capacity for the pesticides of interest (flutriafol, atrazine, heptachlor, DDT and bifenthrin) allowing their extraction from shrimp samples. The optimal condition for extraction was obtained using multivariate analysis. The nature of the elution solvent (hexane, methanol, acetonitrile) and the mass ratio between sample:adsorbent (1:1; 1:5 and 1:10) were the evaluated factors for extraction using Ag@CD@ANS and commercial adsorbents (neutral alumina, octadecyl, silica gel). From the multivariate analysis, it was observed that the optimal condition for pesticide extraction using Ag@CD@ANS was reached, using a 1:5 ratio (sample:adsorbent) and acetonitrile (10 mL) as elution solvent. For the commercial adsorbents, the optimal condition for pesticide extraction was reached, using a 1:3 ratio (sample:adsorbent), acetonitrile (10 mL) and neutral alumina as commercial adsorbent. Ag@CD@ANS efficiency was compared with an optimal commercial adsorbent (neutral alumina). No significant difference (p < 0.05) between neutral alumina and Ag@CD@ANS was observed. Recoveries ranging from 75 to 105 % with coefficients of variation ≤ 15 % (n = 3) were obtained using neutral alumina while using Ag@CD@ANS, recoveries ranging from 73 to 102 %, with coefficient of variation ≤ 13 % (n = 3) were obtained for the target pesticides. Limits of detection ranging from 0.5 to 1.0 µg Kg-1 and limits of quantification ranging from 1.6 to 3.3 µg Kg-1 were reached. The results demonstrated that Ag@CD@ANS can alternatively be used as a support for the extraction of persistent organic pollutants, having the advantage of being reusable for up to three cycles.

Overview on recent advances of magnetic metal-organic framework (MMOF) composites in removal of heavy metals from aqueous system

Developing a novel, simple, and cost-effective analytical technique with high enrichment capacity and selectivity is crucial for environmental monitoring and remediation. Metal-organic frameworks (MOFs) are porous coordination polymers that are self-assembly synthesized from organic linkers and inorganic metal ions/metal clusters. Magnetic metal-organic framework (MMOF) composites are promising candidate among the new-generation sorbent materials available for magnetic solid-phase extraction (MSPE) of environmental contaminants due to their superparamagnetism properties, high crystallinity, permanent porosity, ultrahigh specific surface area, adaptable pore shape/sizes, tunable functionality, designable framework topology, rapid and ultrahigh adsorption capacity, and reusability. In this review, we focus on recent scientific progress in the removal of heavy metal ions present in contaminated aquatic system by using MMOF composites. Different types of MMOFs, their synthetic approaches, and various properties that are harnessed for removal of heavy metal ions from contaminated water are discussed briefly. Adsorption mechanisms involved, adsorption capacity, and regeneration of the MMOF sorbents as well as recovery of heavy metal ions adsorbed that are reported in the last ten years have been discussed in this review. Moreover, particular prospects, challenges, and opportunities in future development of MMOFs towards their greener synthetic approaches for their practical industrial applications have critically been considered in this review.

Sustainable adsorptive removal of antibiotics from aqueous streams using Fe3O4-functionalized MIL101(Fe) chitosan composite beads

In this study, we synthesized recyclable Fe₃O₄-functionalized MIL101(Fe) chitosan composite beads for the removal of tetracycline (TC), doxycycline (DC) and ciprofloxacin (CFX) antibiotics from aqueous streams. More than 99% removal efficiency for each antibiotic was achieved at optimum pH, dosage, concentration and contact time. Langmuir adsorption isotherms and pseudo-second-ord er kinetic model were suitable with correlation coefficient values close to 1 for all the antibiotics. Adsorption capacities of 45.33, 33.20 and 31.30 mg g^-1 for TC, DC and CFX, respectively, were reported by the synthesized Fe₃O₄-functionalized MIL101(Fe) chitosan composite beads. The Fe₃O₄-functionalized MIL101(Fe) chitosan composite beads were also tested for their regeneration ability, and a remarkable regeneration ability over up to 5 cycles was observed. The adsorption of TC, DC and CFX on the surface of Fe₃O₄-functionalized MIL101(Fe) chitosan composite beads was governed by the π-π interaction, H-bonding and electrostatic interaction between the antibiotics and adsorbent due to protonation, deprotonation and cation exchange in the aqueous solution. These results showed a good prospect for applying the reported beads towards removing antibiotics from pharmaceutical industry wastewater.

A UCMPs@MIL-100 based thermo-sensitive molecularly imprinted fluorescence sensor for effective detection of β-lactoglobulin allergen in milk products

In this study, a thermo-sensitive molecularly imprinted fluorescence sensor was developed for the specific detection of β-Lactoglobulin (β-LG) allergen in milk products. The metal–organic frameworks (MIL-100) with a high specific surface area was coated on the surface of upconversion micro-particles (UCMPs). As the core, an imprinted polymer layer allowing for swelling and shrinking with response to temperature was prepared, which exhibited high adsorption and mass transfer capabilities for β-LG allergen. The fluorescence intensity of UCMPs@MIL-100@MIP decreased linearly with the concentration of β-LG in the range of 0.1–0.8 mg mL⁻¹, and the limit of detection was 0.043 mg mL⁻¹. The imprinting factor reached 3.415, which indicated that excellent specificity of the UCMPs@MIL-100@MIP for β-LG allergen. In the analysis of β-LG allergen in actual milk samples, the proposed UCMPs@MIL-100@MIP fluorescence sensor produced reliable and accurate results (recovery: 86.0–98.4%, RSD: 2.8–6.8%), closely related to the results of standard HPLC method (correlation coefficient: 0.9949), indicating that its feasibility in the detection of β-LG allergen.

Selective magnetic solid-phase extraction of amide herbicides from fish samples coupled with ultra-high-performance liquid chromatography with tandem mass spectrometry

An efficient magnetic dummy template molecularly imprinted polymer nanocomposite was prepared using multi-walled carbon nanotubes as a support and metolachlor deschloro as a dummy template. The obtained nanocomposites were characterized using Fourier transform infrared spectroscopy, vibrating sample magnetometry, scanning electron microscopy, and transmission electron microscopy. The adsorption performance of the obtained nanocomposites was evaluated through binding experiments, including static adsorption, kinetic adsorption, and selective recognition studies. The obtained nanocomposites were successfully applied as selective sorbents for the magnetic solid-phase extraction of seven amide herbicides (alachlor, acetochlor, pretilachlor, butachlor, metolachlor, diethatyl ethyl, and dimethachlor) coupled with liquid chromatography-tandem mass spectrometry from fish samples. Under the optimized conditions, the limit of detection was 0.01-0.1 μg/kg. The obtained recoveries of the amide herbicides from the fish samples were in the range of 88.0 to 102.1% with a relative standard deviation of less than 7.5%. This method, which eliminated the effect of template leakage on qualitative and quantitative analysis was found to be superior to the methods reported in the literature. The results indicated that it could be successfully applied to analyze amide herbicides in fish samples with satisfactory recoveries.

Aspects of high-performance and bio-acceptable magnetic nanoparticles for biomedical application

This review covers extensively the synthesis & surface modification, characterization, and application of magnetic nanoparticles. For biomedical applications, consideration should be given to factors such as design strategies, the synthesis process, coating, and surface passivation. The synthesis method regulates post-synthetic change and specific applications in vitro and in vivo imaging/diagnosis and pharmacotherapy/administration. Special insights have been provided on biodistribution, pharmacokinetics, and toxicity in a living system, which is imperative for their wider application in biology. These nanoparticles can be decorated with multiple contrast agents and thus can also be used as a probe for multi-mode imaging or double/triple imaging, for example, MRI-CT, MRI-PET. Similarly loading with different drug molecules/dye/fluorescent molecules and integration with other carriers have found application not only in locating these particles in vivo but simultaneously target drug delivery/hyperthermia inside the body. Studies are underway to collect the potential of these magnetically driven nanoparticles in various scientific fields such as particle interaction, heat conduction, imaging, and magnetism. Surely, this comprehensive data will help in the further development of advanced techniques for theranostics based on high-performance magnetic nanoparticles and will lead this research area in a new sustainable direction.

Functional Hybrid Micro/Nanoentities Promote Agro-Food Safety Inspection

The rapid development of nanomaterials has provided a good theoretical basis and technical support to solve the problems of food safety inspection. The combination of functionalized composite nanomaterials and well-known detection methods is gradually applied to detect hazardous substances, such as chemical residues and toxins, in agricultural food products. This review concentrates on the latest agro-food safety inspection techniques and methodologies constructed with the assistance of new hybrid micro/nanoentities, such as molecular imprinting polymers integrated with quantum dots (MIPs@QDs), molecular imprinting polymers integrated with upconversion luminescent nanoparticles (MIPs@UCNPs), upconversion luminescent nanoparticles combined with metal-organic frameworks (UCNPs@MOFs), magnetic metal-organic frameworks (MOFs@Fe₃O₄), magnetic covalent-organic frameworks (Fe₃O₄@COFs), covalent-organic frameworks doped with quantum dots (COFs@QDs), nanobody-involved immunoassay for fast inspection, etc. The presented summary and discussion favor a relevant outlook for further integrating various disciplines, like material science, nanotechnology, and analytical methodology, for addressing new challenges that emerge in agro-food research fields.

Nanoplatform-Integrated Miniaturized Solid-Phase Extraction Techniques: A Critical Review

Preparation of the biological samples is one of the most critical steps in sample analysis. In past decades, the liquid-liquid extraction technique has been used to extract the desired analytes from complex biological matrices. However, solid-phase extraction (SPE) gained popularity due to versatility, simplicity, selectivity, reproducibility, high sample recovery %, solvent economy, and time-saving nature. The superior extraction efficiency of SPE can be attributed to the development of advanced techniques, including the nanosorbents technology. The nanosorbent technology significantly simplified the sample preparation, improved the selectivity, diversified the application, and accelerated the sample analysis. This review critically expands on the to-date advancements reported in SPE with particular regards to the nanosorbent technology.