Novel Biodegradable Starch Film for Food Packaging with Antimicrobial Chicory Root Extract and Phytic Acid as a Cross-Linking Agent

Evaluation of Inulin and Polyphenol Content and the Cytotoxicity of Cichorium intybus L. var. foliosum Root Extracts Obtained by Pectinase- and Pressure-Assisted Extraction

BACKGROUND

Cichorium intybus L., a member of the Asteraceae family, has numerous health-promoting properties that categorize its preparations as functional foods and herbal medicines. Most previous research focused on the root of C. intybus var. sativum (industrial chicory) as a rich source of inulin, while the witloof variety (C. intybus var. foliosum) is less explored.

OBJECTIVES

This study aimed to evaluate the cytotoxicity of C. intybus var. foliosum root extracts obtained with different extraction protocols and to analyze their polysaccharide and polyphenol content.

METHODS

Freeze-dried root extracts were prepared using water and three extraction methods: pectinase-assisted, pressure-assisted, and a combination of both. The contents of inulin, total polyphenols, and total caffeic acid derivatives in the extracts were measured by the Layne-Eynon, Folin-Ciocalteu, and UHPLC-PDA methods, respectively. Cytotoxicity of the extracts and inulin was tested in vitro using the L929 cell line, MTT method, and paracetamol as the reference standard.

RESULTS

Inulin levels in the extracts ranged from 43.88 to 50.95 g/100 g dry matter (dm), total polyphenols were between 816.7 and 906.4 mg/100 g dm, and total phenolic acids ranged from 11.50 to 187.1 mg/100 dm, with pressure-assisted extraction yielding the highest phytochemical recovery. The cytotoxicity tests showed IC50 values from 4.72 to 7.31 mg/mL for the extracts, compared to 3.02 for paracetamol and 19.77 for inulin.

CONCLUSIONS

Given the high content of active compounds and low cytotoxicity, the root extracts of C. intybus var. foliosum merit further research into their functional and medicinal properties. Pressure-assisted extraction is recommended for effective extraction of chicory.

High water resistance starch based intelligent label for the freshness monitoring of beverages

The traditional starch-based intelligent freshness labels struggle to maintain long-term structural stability when exposed to moisture. To solve this problem, we prepared composite crosslinked labels using phytic acid for double crosslinking of corn starch and soybean isolate proteins, with anthocyanin serving as the chromogenic dye. The mechanical properties, hydrophobic characteristics, and pH responsivity of these crosslinked labels were assessed in this study. The prepared double-crosslinked labels showed reduced moisture content (15.96%), diminished swelling (147.21%), decreased solubility (28.55%), and minimized water permeability, which suggested that they have enhanced hydrophobicity and densification. The crosslinked labels demonstrated the ability to maintain morphological stability when immersed in water for 12 h. Additionally, the mechanical properties of the crosslinked labels were enhanced without compromising their pH-sensing capabilities, demonstrated a color response visible to the naked eye for milk and coconut water freshness monitoring, suggesting great potential for application in beverages freshness monitoring.

A review on the hydration properties of dietary fibers derived from food waste and their interactions with other ingredients: opportunities and challenges for their application in the food industry

Dietary fiber (DF) significantly affects the quality attributes of food matrices. Depending on its chemical composition, molecular structure, and degree of hydration, the behavior of DF may differ. Numerous reports confirm that incorporating DF derived from food waste into food products has significant effects on textural, sensory, rheological, and antimicrobial properties. Additionally, the characteristics of DF, modification techniques (chemical, enzymatic, mechanical, thermal), and processing conditions (temperature, pH, ionic strength), as well as the presence of other components, can profoundly affect the functionalities of DF. This review aims to describe the interactions between DF and water, focusing on the effects of free water, freezing-bound water, and unfreezing-bound water on the hydration capacity of both soluble and insoluble DF. The review also explores how the structural, functional, and environmental properties of DF contribute to its hydration capacity. It becomes evident that the interactions between DF and water, and their effects on the rheological properties of food matrices, are complex and multifaceted subjects, offering both opportunities and challenges for further exploration. Utilizing DF extracted from food waste exhibits promise as a sustainable and viable strategy for the food industry to create nutritious and high-value-added products, while concurrently reducing reliance on primary virgin resources.

Radish residue carbon dots-based novel starch/chitosan film with high antioxidant, biocompatibility, and antibacterial activities for salmon fillets' active packaging

The corruption of refrigerated marine fish results in global economic losses exceeding 25 billion euros annually. However, conventional preservatives present challenges, including singular functionality, potential toxicity, and high cost. In response, we developed multifunctional, safe, cost-effective, and environmentally friendly carbon dots derived from radish residues (R-CDs) by using the one-pot hydrothermal method. The surface of R-CDs is enriched with hydroxyl groups, conferring broad-spectrum antioxidant and antibacterial characteristics. R-CDs exhibited a notable 72.92 % inhibition rate on lipid peroxidation, surpassing the effectiveness of vitamin C (46 %). Additionally, R-CDs demonstrated impressive scavenging rates of 93.8 % for 2,2-diphenyl-1-picrylhydrazyl free radicals and 99.36 % for 2,2-azino-bis-3-ethylbenzothiazoline-6-sulphonic acid-free radicals. In combating spoilage bacteria such as Aeromonas sobria and Hafnia alvei, R-CDs disrupted cell structures and influenced intracellular substance content. Importantly, co-cultivation with R-CDs showed no significant cytotoxicity. Further incorporating R-CDs into films using starch and chitosan (S/CS/R-CDs films) for efficient and convenient use in salmon fillets preservation. S/CS/R-CDs films effectively inhibited the growth of spoilage bacteria, lipid oxidation, and protein decomposition in salmon fillets, thereby extending shelf life by 4 days. This combination of antioxidant and antibacterial properties in R-CDs, along with the functional films, presents a promising approach for enhancing salmon fillet preservation.

Biodegradable ion-conductive polyvinyl alcohol/okra polysaccharide composite films for fast-response respiratory monitoring sensors

Polyvinyl alcohol (PVA) and okra polysaccharide (OP) are biodegradable polymers with high hydrophilicity and good biocompatibility with potential for use as flexible humidity-sensitive materials. Herein, biodegradable flexible composite films (named POP films) were prepared from PVA, OP, and phytic acid using a solution-casting method based on. POP films exhibited excellent mechanical strength, flexibility, flame retardancy, water resistance, humidity response, and humidity-sensing characteristics. Notably, the POP humidity sensors exhibited a hysteresis value of 1.88 % relative humidity for the adsorption and desorption processes and good sensitivity over a wide humidity range of 35-95 %. In addition, the humidity sensor distinguished the frequency of nose breathing, and its response and recovery times were 0.9 and 1.98 s, respectively. The excellent performance of POP sensors in monitoring humidity and human respiratory rates demonstrates the sensor's potential for wearable smart devices.

Antiviral and antibacterial activity of sodium alginate/poly(diallyldimethylammonium chloride) polyelectrolyte film for packaging applications

Pathogen agents, such as bacteria and virus, can contaminate plastic surfaces, particularly those used in food packaging. This study proposed to prepare a polyelectrolyte film with antiviral and antibacterial activity based on sodium alginate (SA) and poly(diallyldimethylammonium chloride) (PDADMAC), a cationic polymer with sanitizing properties. In addition, the physicochemical properties of the polyelectrolyte films were also evaluated. The polyelectrolyte films showed continuous, compact, and crack-free structures. The FTIR analysis confirmed the ionic interaction between SA and PDADMAC. Adding PDADMAC significantly affected the mechanical properties of the films (p < 0.05), increasing the maximum tensile strength (from 8.66 ± 1.55 MPa to 18.1 ± 1.77 MPa). However, polyelectrolyte films showed higher water vapor permeability values due to the strong hydrophilicity of PDADMAC, representing a 43 % average increase compared with the control film. Also, thermal stability improved with the incorporation of PDADMAC. The selected polyelectrolyte film inactivated 99.8 % of SARS-CoV-2 after 1 min in direct contact with the virus, in addition to having an inhibitory effect against Staphylococcus aureus and Escherichia coli bacteria. Therefore, this study demonstrated the efficacy of using PDADMAC in the preparation of polyelectrolyte sodium alginate-based films with improvements in physicochemical properties and especially with antiviral activity against SARS-CoV-2.

Synergizing Multi-Plasticizers for a Starch-Based Edible Film

Synergized multi-plasticizers for a starch-based edible film were developed for food packaging. The most popular edible plasticizers, water, glycerol, and sorbitol were used as modal materials to demonstrate the synergized function of multi-plasticizers. The efficiency, stability, and compatibility of each plasticizer, as well as their synergized functions were investigated based on the characterizations of tensile properties after storing under different humidity conditions and for different times. The relationship between the microstructures of the plasticizers and their performances was studied and established. The results showed that water is an efficient plasticizer but is not stable, which results in it becoming brittle under lower humidity conditions; glycerol has a stronger moisture-retaining and absorption capability, which results in a weaker tensile strength under higher humidity conditions; and sorbitol is an efficient and stable plasticizer but needs to work with water, and its function can be synthesized by mixing it with water and glycerol.

Evaluation of Activity of Sesquiterpene Lactones and Chicory Extracts as Acetylcholinesterase Inhibitors Assayed in Calorimetric and Docking Simulation Studies

The aim of the study was to explain the effects of sesquiterpene lactones (SLs) from chicory (Cichorium intybus L.) root extracts as inhibitors of acetylcholinesterase (AChE) at the molecular level and to determine the inhibition of AChE activity by specific SLs (lactucin and lactucopicrin) and different chicory extracts. The obtained SLs-rich extracts were purified by the countercurrent partition chromatography (CPC) technique. AChE inhibitors were analyzed using two models: isothermal titration calorimetry (ITC) and docking simulation. The results of ITC analysis of the enzyme and the ligands' complexation showed strong interactions of SLs as well as extracts from chicory with AChE. In a test of enzyme activity inhibition after introducing acetylcholine into the model system with SL, a stronger ability to inhibit the hydrolysis of the neurotransmitter was observed for lactucopicrin, which is one of the dominant SLs in chicory. The inhibition of enzyme activity was more efficient in the case of extracts, containing different enzyme ligands, exhibiting complementary patterns of binding the AChE active site. The study showed the high potential of using chicory to decrease the symptoms of Alzheimer's disease.

Comparison of Aging Resistance and Antimicrobial Properties of Ethylene-Norbornene Copolymer and Poly(Lactic Acid) Impregnated with Phytochemicals Embodied in Thyme (Thymus vulgaris) and Clove (Syzygium aromaticum)

The effects of plant-based extracts on the solar aging and antimicrobial properties of impregnated ethylene-norbornene (EN) copolymer and poly(lactic acid) (PLA) were investigated. In this study, the impregnation yield of polyolefin, lacking in active centers capable of phytochemical bonding, and polyester, abundant in active sides, was measured. Moreover, two different extracts plentiful in phytochemicals-thyme (TE) and clove (CE)-were employed in the solvent-based impregnation process. The effect of thymol and eugenol, the two main compounds embodied in the extracts, was studied as well. Interestingly, oxidation induction times (OIT) for the impregnation of EN with thyme and clove extracts were established to be, respectively, 27.7 and 39.02 min, which are higher than for thymol (18.4 min) and eugenol (21.1 min). Therefore, an aging experiment, mimicking the full spectrum of sunlight, was carried out to investigate the resistance to common radiation of materials impregnated with antioxidative substances. As expected, the experiment revealed that the natural extracts increased the shelf-life of the polymer matrix by inhibiting the degradation processes. The aging resistance was assessed based on detected changes in the materials' behavior and structure that were examined with Fourier-transform infrared spectroscopy, contact angle measurements, color quantification, tensile tests, and hardness investigation. Such broad results of solar aging regarding materials impregnated with thyme and clove extracts have not been reported to date. Moreover, CE was found to be the most effective modifying agent for enabling material with antimicrobial activity against Escherichia coli to be obtained.

Applications of Natural Antimicrobials in Food Packaging and Preservation

In the food science field, the term "antimicrobial" basically refers to active substances of synthetic or natural origin, that are directly or indirectly present in a specific food, packaging material or food contact surface that affect the viability or the growth of microorganisms in that matrix [...].

Antibacterial mechanisms of Aronia melanocarpa (Michx.), Chaenomeles superba Lindl. and Cornus mas L. leaf extracts

The aim of this study was to investigate the in vitro antibacterial mechanisms of Aronia melanocarpa, Chaenomeles superba, and Cornus mas leaf extracts towards meat spoilage and pathogenic bacteria. The extracts decreased bacterial viability after 24 h and 48 h of incubation. Acting as prooxidants, the extracts induced intracellular ROS (reactive oxygen species) generation in bacteria cells, with C. mas having the strongest influence. The leaf extracts increased the release of UV intracellular absorbing components, suggesting a reduction in membrane integrity. They also increased the outer-membrane permeability of the Gram-negative bacteria, with C. superba extract being the most active. Following exposure to the leaf extracts, morphological changes in the bacteria were observed, including the formation of aggregates, EPS synthesis, irregular forms, wrinkled cell surfaces, pores in the cell wall, and shriveling of cells. The leaf extracts inhibited DNA synthesis in E. coli cells by suppressing DNA gyrase activity.