The Squeezed Light Source for the Advanced Virgo Detector in the Observation Run O3

12.6 dB squeezed light at 1550 nm from a bow-tie cavity for long-term high duty cycle operation

Squeezed states are an interesting class of quantum states that have numerous applications. This work presents the design, characterization, and operation of a bow-tie optical parametric amplifier (OPA) for squeezed vacuum generation. We report the high duty cycle operation and long-term stability of the system that makes it suitable for post-selection based continuous-variable quantum information protocols, cluster-state quantum computing, quantum metrology, and potentially gravitational wave detectors. Over a 50 hour continuous operation, the measured squeezing levels were greater than 10 dB with a duty cycle of 96.6%. Alternatively, in a different mode of operation, the squeezer can also operate 10 dB below the quantum noise limit over a 12 hour period with no relocks, with an average squeezing of 11.9 dB. We also measured a maximum squeezing level of 12.6 dB at 1550 nm. This represents one of the best reported squeezing results at 1550 nm to date for a bow-tie cavity. We discuss the design aspects of the experiment that contribute to the overall stability, reliability, and longevity of the OPA, along with the automated locking schemes and different modes of operation.

Squeezed States of Light for Future Gravitational Wave Detectors at a Wavelength of 1550 nm

The generation of strongly squeezed vacuum states of light is a key technology for future ground-based gravitational wave detectors (GWDs) to reach sensitivities beyond their quantum noise limit. For some proposed observatory designs, an operating laser wavelength of 1550 nm or around 2  μm is required to enable the use of cryogenically cooled silicon test masses for thermal noise reduction. Here, we present for the first time the direct measurement of up to 11.5 dB squeezing at 1550 nm over the complete detection bandwidth of future ground-based GWDs ranging from 10 kHz down to below 1 Hz. Furthermore, we directly observe a quantum shot-noise reduction of up to (13.5±0.1)  dB at megahertz frequencies. This allows us to derive a precise constraint on the absolute quantum efficiency of the photodiode used for balanced homodyne detection. These results hold important insight regarding the quantum noise reduction efficiency in future GWDs, as well as for quantum information and cryptography, where low decoherence of nonclassical states of light is also of high relevance.

10 dB Quantum-Enhanced Michelson Interferometer with Balanced Homodyne Detection

Future generations of gravitational-wave detectors (GWD) are targeting an effective quantum noise reduction of 10 dB via the application of squeezed states of light. In the last joint observation run O3, the advanced large-scale GWDs LIGO and Virgo already used the squeezing technology, albeit with a moderate efficiency. Here, we report on the first successful 10 dB sensitivity enhancement of a shot-noise limited tabletop Michelson interferometer via squeezed light in the fundamental Gaussian laser mode, where we also implement the balanced homodyne detection scheme that is planned for the third GWD generation. In addition, we achieved a similarly strong quantum noise reduction when the interferometer was operated in higher-order Hermite-Gaussian modes, which are discussed for the GWD thermal noise mitigation. Our results are an important step toward the targeted quantum noise level in future GWDs and, moreover, represent significant progress in the application of nonclassical states in higher-order modes for interferometry, increased spatial resolution, and multichannel sensing.

Squeezing in Gravitational Wave Detectors

Injecting optical squeezed states of light, a technique known as squeezing, is now a tool for gravitational wave detection. Its ability to reduce quantum noise is helping to reveal more gravitational wave transients, expanding the catalog of observations in the last observing run. This review introduces squeezing and its history in the context of gravitational-wave detectors. It overviews the benefits, limitations and methods of incorporating squeezing into advanced interferometers, emphasizing the most relevant details for astrophysics instrumentation.

Observation of Squeezed States of Light in Higher-Order Hermite-Gaussian Modes with a Quantum Noise Reduction of up to 10 dB

Mirror thermal noise will be a main limitation for the sensitivities of the next-generation ground-based gravitational-wave detectors (Einstein Telescope and Cosmic Explorer) at signal frequencies around 100 Hz. Using a higher-order spatial laser mode instead of the fundamental mode is one proposed method to further mitigate mirror thermal noise. In the current detectors, quantum noise is successfully reduced by the injection of squeezed vacuum states. The operation in a higher-order mode would then require the efficient generation of squeezed vacuum states in this mode to maintain a high quantum noise reduction. In our setup, we generate continuous-wave squeezed states at a wavelength of 1064 nm in the fundamental and three higher-order Hermite-Gaussian modes up to a mode order of 6 using a type-I optical parametric amplifier. We present a significant milestone with a quantum noise reduction of up to 10 dB at a measurement frequency of 4 MHz in the higher-order modes and pave the way for their usage in future gravitational-wave detectors as well as in other quantum noise limited experiments.

Detecting Gravitational Waves with Advanced Virgo

Advanced Virgo is the European gravitational-wave detector that, along with the American ones, is part of the global network of detectors that have been pinpointing gravitational waves since 2015. These kilometer-scale laser interferometers, measuring the distance between quasi-free-falling mirrors, represent the suitable detectors to explore the Universe through gravitational radiation. The initial Virgo experiment completed several runs of scientific data between 2007 and 2011, establishing the upper limits on the gravitational-wave rate expected for several astrophysical sources. The Advanced Virgo project led this instrument to unprecedented sensitivities making gravitational wave detections a routine occurrence. In this review, the basic techniques to build gravitational-waves interferometers and the upgrades needed to boost their sensitivities, even beyond the classical limit, are presented. The particular case of Advanced Virgo will be described hinting at its future developments, as well.

Advanced Virgo: Status of the Detector, Latest Results and Future Prospects

The Virgo detector, based at the EGO (European Gravitational Observatory) and located in Cascina (Pisa), played a significant role in the development of the gravitational-wave astronomy. From its first scientific run in 2007, the Virgo detector has constantly been upgraded over the years; since 2017, with the Advanced Virgo project, the detector reached a high sensitivity that allowed the detection of several classes of sources and to investigate new physics. This work reports the main hardware upgrades of the detector and the main astrophysical results from the latest five years; future prospects for the Virgo detector are also presented.