Hydrogel Containing Solid Lipid Nanoparticles Loaded with Argan Oil and Simvastatin: Preparation, In Vitro and Ex Vivo Assessment

Enhancing Oral Bioavailability of Simvastatin Using Uncoated and Polymer-Coated Solid Lipid Nanoparticles

Simvastatin (SVA) is a well-prescribed drug for treating cardiovascular and hypercholesterolemia. Due to the extensive hepatic first-pass metabolism and poor solubility, its oral bioavailability is 5%. Solid lipid nanoparticles (SLNs) and hydrogel-coated SLNs were investigated to overcome the limited bioavailability of SVA. Four different lipids used alone or in combination with two stabilizers were employed to generate 13 SLNs. Two concentrations of chitosan (CS) and alginate (AL) were coating materials. SLNs were studied for particle size, zeta potential, in vitro release, rheology, and bioavailability. The viscosities of both the bare and coated SLNs exhibited shear-thinning behavior. The viscosity of F11 (Chitosan 1%) at 20 and 40 rpm were 424 and 168 cp, respectively. F11 had a particle size of 260.1 ± 3.72 nm with a higher release; the particle size of F11-CS at 1% was 524.3 ± 80.31 nm. In vivo studies illustrated that F11 had the highest plasma concentration when compared with the SVA suspension and coated chitosan (F11 (Chitosan 1%)). Greater bioavailability is measured as (AUC0→24), as compared to uncoated ones. The AUC for F11, F11-CS 1%, and the SVA suspension were 1880.4, 3562.18, and 272 ng·h/mL, respectively. Both bare and coated SLNs exhibited a significantly higher relative bioavailability when compared to that from the control SVA.

Enhancing anti-inflammatory effect of brucine nanohydrogel using rosemary oil: a promising strategy for dermal delivery in arthritic inflammation

Brucine (BRU), an active constituent of Strychnos nux-vomica L., is one of the potential agents to control subside swelling in arthritis. However, its hydrophobic nature, poor permeation, shorter half-life, narrow therapeutic window, and higher toxicity impede its clinical applications. Hence, this investigation was aimed to develop and evaluate novel BRU loaded β-cyclodextrin (β-CD) nanosponges (BRUNs) hydrogel consisting rosemary essential oil (RO), which have been tailored for delayed release, enhanced skin permeation, and reduced irritation, while retaining anti-oxidant and anti-inflammatory activities of this bioactive. Firstly, BRUNs were fabricated by melt technique and characterized appropriately. BRUNs6 demonstrated two fold enhancement in BRU solubility (441.692 ± 38.674) with minimum particle size (322.966 ± 54.456) having good PDI (0.571 ± 0.091) and zeta potential (-14.633 ± 6.357). In vitro release results demonstrated delayed release of BRU from BRUNs6 (67 ± 4.25%) over 24 h through molecular diffusion mechanism. Further, preserved anti-inflammatory (53.343 ± 0.191%) and antioxidant potential (60.269 ± 0.073%) of bioactive was observed in BRUNs6. Hence, this Ns batch was engrossed with Carbopol®934 hydrogel with RO and characterized. In vitro (release and anti-inflammatory activity), ex-vivo (skin permeability) and in vivo (carrageenan-induced inflammation) assays along with irritation study were conducted for fabricated hydrogels. Results revealed that in vitro release of BRU was further delayed from Ns hydrogel with RO (56.45 ± 3.01%) following Fickian mechanism. Considerable enhancement in skin permeability (60.221 ± 0.322 µg/cm2/h) and preservation of anti-inflammatory activity (94.736 ± 2.002%) was also observed in BRUNs6 hydrogel containing RO. The irritation of BRU was found reduced (half) after its entrapped in Ns. Further, as a proof of concept, BRUNs6 hydrogel with RO effectively reduced (75.757 ± 0.944%) carrageenan-induced inflammation in rat model in comparison to pure BRU (54.914 ± 1.081%). Hence, BRUNs hydrogel with RO can be considered as a promising alternative for dermal delivery of BRU in arthritis.

Formulation of essential oils-loaded solid lipid nanoparticles-based chitosan/PVA hydrogels to control the growth of Botrytis cinerea and Penicillium expansum

Botrytis cinerea and Penicillium expansum are phytopathogenic fungi that produce the deterioration of fruits. Thus, essential oil (EO) has emerged as a sustainable strategy to minimize the use of synthetic fungicides, but their volatility and scarce solubility restrict their application. This study proposes the EO of Oreganum vulgare and Thymus vulgaris-loaded solid lipid nanoparticles (SLN) based chitosan/PVA hydrogels to reduce the infestation of fungi phytopathogen. EO of O. vulgare and T. vulgaris-loaded SLN had a good homogeneity (0.21-0.35) and stability (-28.8 to -33.0 mV) with a mean size of 180.4-188.4 nm. The optimization of EO-loaded SLN showed that the encapsulation of 800 and 1200 μL L-1 of EO of O vulgare and T. vulgaris had the best particle size. EO-loaded SLN significantly reduced the mycelial growth and spore germination of both fungi pathogen. EO-loaded SLN into hydrogels showed appropriate physicochemical characteristics to apply under environmental conditions. Furthermore, rheological analyses evidenced that hydrogels had solid-like characteristics and elastic behavior. EO-loaded SLN-based hydrogels inhibited the spore germination in B. cinerea (80.9 %) and P. expansum (55.7 %). These results show that SLN and hydrogels are eco-friendly strategies for applying EO with antifungal activity.

Development and In-Vitro Evaluation of Eugenol-Based Nanostructured Lipid Carriers for Effectual Topical Treatment Against C. albicans

The main objective of the experiment is to develop and evaluate hydrogel-bearing nanostructured lipid carriers (NLCs) loaded with ketoconazole (KTZ) for the effective treatment of candidiasis. The eugenol was used as a liquid lipid (excipient) for the development of KTZ-loaded NLCs and was explored for anti-fungal effect. The production of NLCs involves high energy processes to generate spherical, uniform particles, having a higher percentage of entrapment efficiency (%EE) for KTZ with 89.83 ± 2.31 %. The data from differential scanning calorimeter (DSC), powder x-ray diffraction (PXRD), and attenuated total reflectance (ATR) demonstrated the KTZ dispersion in NLCs. The NLCs loaded hydrogel possessed optimum spreadability and exhibited shear thinning behavior, indicating the ease of application of the final formulation. The 6.41-fold higher transdermal flux (Jss) was governed for KTZ from KTZ-NLC than coarse-KTZ, which explains the usefulness of NLCs. The KTZ-NLCs exhibited significant 2.58 and 6.35-fold higher retention in the stratum corneum and viable epidermis of the skin. The cell cytotoxicity studies using human dermal fibroblast cell (HDFS) lines depicted the usefulness of NLCs in reducing cell toxicities for KTZ. The KTZ-NLCs were found to inhibit planktonic growth and hyphal transition and showed a larger zone of inhibition against C. albicans strains with a MIC-50 value of 0.39 μg/mL. The antibiofilm activity of KTZ-NLCs at lower concentrations, in contrast to plain KTZ, explained the interaction of developed NLCs with fungal membranes. The overall results depicted the effectiveness of the loading KTZ in the lipid matrix to achieve antifungal activity against C. albicans.

Enhanced drug delivery and wound healing potential of berberine-loaded chitosan-alginate nanocomposite gel: characterization and in vivo assessment

Berberine-encapsulated polyelectrolyte nanocomposite (BR-PolyET-NC) gel was developed as a long-acting improved wound healing therapy. BR-PolyET-NC was developed using an ionic gelation/complexation method and thereafter loaded into Carbopol gel. Formulation was optimized using Design-Expert® software implementing a three-level, three-factor Box Behnken design (BBD). The concentrations of polymers, namely, chitosan and alginate, and calcium chloride were investigated based on particle size and %EE. Moreover, formulation characterized in vitro for biopharmaceutical performances and their wound healing potency was evaluated in vivo in adult BALB/c mice. The particle distribution analysis showed a nanocomposite size of 71 ± 3.5 nm, polydispersity index (PDI) of 0.45, ζ-potential of +22 mV, BR entrapment of 91 ± 1.6%, and loading efficiency of 12.5 ± 0.91%. Percentage drug release was recorded as 89.50 ± 6.9% with pH 6.8, thereby simulating the wound microenvironment. The in vitro investigation of the nanocomposite gel revealed uniform consistency, well spreadability, and extrudability, which are ideal for topical wound use. The analytical estimation executed using FT-IR, DSC, and X-ray diffraction (XRD) indicated successful formulation with no drug excipients and without the amorphous state. The colony count of microbes was greatly reduced in the BR-PolyET-NC treated group on the 15th day from up to 6 CFU compared to 20 CFU observed in the BR gel treated group. The numbers of monocytes and lymphocytes counts were significantly reduced following healing progression, which reached to a peak level and vanished on the 15th day. The observed experimental characterization and in vivo study indicated the effectiveness of the developed BR-PolyET-NC gel toward wound closure and healing process, and it was found that >99% of the wound closed by 15th day, stimulated via various anti-inflammatory and angiogenic factors.

Preparation and characterization of solid lipid nanoparticles encapsulated noscapine and evaluation of its protective effects against imiquimod-induced psoriasis-like skin lesions

Psoriasis is a chronic inflammatory skin disease characterized by thickening the epidermis with erythema, scaling, and proliferation. Noscapine (NOS) has several anti-inflammatory, anti-angiogenic, and anti-fibrotic effects, but its low solubility and large size results in its lower efficacy in the clinic. In this regard, solid lipid nanoparticles (SLN) encapsulated NOS (SLN-NOS) were fabricated using the well-known response surface method based on the central composite design and modified high-shear homogenization and ultrasound method. As a result, Precirol® was selected as the best lipid base for the SLN formulation based on Hildebrand-Hansen solubility parameters, in which SLN-NOS 1 % had the best zeta potential (-35.74 ± 2.59 mV), average particle size (245.66 ± 17 nm), polydispersity index (PDI, 0.226 ± 0.09), high entrapment efficiency (89.77 %), and ICH-based stability results. After 72 h, the SLN-NOS 1 % released 83.23 % and 58.49 % of the NOS at pH 5.8 and 7.4, respectively. Moreover, Franz diffusion cell's results indicated that the skin levels of NOS for SLN and cream formulations were 46.88 % and 13.5 % of the total amount, respectively. Our pharmacological assessments revealed that treatment with SLN-NOS 1 % significantly attenuated clinical parameters, namely ear thickness, length, and psoriasis area and severity index, compared to the IMQ group. Interestingly, SLN-NOS 1 % reduced the levels of interleukin (IL)-17, tumor necrosis factor-α, and transforming growth factor-β, while elevating IL-10, compared to the IMQ group. Histology studies also showed that topical application of SLN-NOS 1 % significantly decreased parakeratosis, hyperkeratosis, acanthosis, and inflammation compared to the IMQ group. Taken together, SLN-NOS 1 % showed a high potential to attenuate skin inflammation.

Antimicrobial polymer-loaded hydrogels for the topical treatment of multidrug-resistant wound biofilm infections

Integration of antimicrobial polymeric nanoparticles into hydrogel materials presents a promising strategy to address multidrug-resistant biofilm infections. Here we report an injectable hydrogel loaded with engineered cationic antimicrobial polymeric nanoparticles (PNPs) for the effective topical treatment of severe wound biofilm infections. The PNPs demonstrated biofilm penetration and disruption, resulting in the eradication of resistant and persister cells that reside within the biofilm. Significantly, PNPs did not elicit resistance development even after multiple exposures to sub-therapeutic doses. In vitro studies showed PNPs significantly reduced prolonged inflammation due to infection and promoted fibroblast migration. These PNPs were then incorporated into Poloxamer 407 (P407) hydrogels and utilized as an inert carrier for PNPs to provide a controlled and sustained topical release of the antimicrobial nanoparticles at the wound area. In vivo studies using a mature (4-day) wound biofilm infection in a murine model mimicking severe human wound infections demonstrated provided 99% bacterial biofilm clearance and significantly enhanced wound healing. Overall, this work demonstrated the efficacy and selectivity of the antimicrobial polymer-loaded hydrogel platform as a topical treatment for difficult-to-treat wound biofilm infections.

Assessment of anti-psoriatic activity of bakuchiol-loaded solid lipid nanoparticles-based gel: design, characterization, and mechanistic insight via NF-kB signaling pathway

The aim of the current study is to evaluate the anti-psoriatic potential of bakuchiol (Bak) loaded solid lipid nanoparticles (SLNs) via modulating inflammatory and oxidative pathways. Bak-loaded SLNs were prepared using hot homogenization method and characterized by various spectroscopic techniques. Bak-SLNs suspension was formulated into gel using Carbopol. Different in vivo assays were executed to explore the role of inflammatory markers and oxidative enzymes in psoriasis. DLS (dynamic light scattering) analysis showed suitable particle size, zeta potential, and polydispersity index (PDI) of developed formulation. TEM (transmission electron microscopy) reveal the spherical shape of Bak-SLNs particles. The release studies confirmed the sustained release of Bak-SLNs-based gel. UV-B-induced psoriatic Wistar rat model showed significant anti-psoriatic effect of Bak via regulating inflammatory markers (NF-kB, IL-6, IL-4, and IL-10) and levels of anti-oxidant enzymes, superoxide dismutase (SOD), catalase (CAT), glutathione (GSH), and glutathione-S-transferase (GST). Furthermore, RT-qPCR analysis confirms that Bak downregulates the expression of inflammatory markers, while histology and immunohistology results also confirm the anti-psoriatic effect of Bak. The study indicates that Bak-loaded SLNs-based gel significantly downregulates the level of cytokines and interleukins involve in NF-kB signaling cascade; hence, it can prove to be a novel therapeutic approach to cure psoriasis.

Investigation of the phytochemical composition, antioxidant, antibacterial, anti-osteoarthritis, and wound healing activities of selected vegetable waste

Agri-food wastes, produced following industrial food processing, are mostly discarded, leading to environmental hazards and losing the nutritional and medicinal values associated with their bioactive constituents. In this study, we performed a comprehensive analytical and biological evaluation of selected vegetable by-products (potato, onion, and garlic peels). The phytochemical analysis included UHPLC-ESI-qTOF-MS/MS in combination with molecular networking and determination of the total flavonoid and phenolic contents. Further, the antimicrobial, anti-osteoarthritis and wound healing potentials were also evaluated. In total, 47 compounds were identified, belonging to phenolic acids, flavonoids, saponins, and alkaloids as representative chemical classes. Onion peel extract (OPE) showed the higher polyphenolic contents, the promising antioxidant activity, the potential anti-osteoarthritis activity, and promising antimicrobial activity, especially against methicillin-resistant Staphylococcus aureus (MRSA). Furthermore, OPE revealed to have promising in vivo wound healing activity, restoring tissue physiology and integrity, mainly through the activation of AP-1 signaling pathway. Lastly, when OPE was loaded with nanocapsule based hydrogel, the nano-formulation revealed enhanced cellular viability. The affinities of the OPE major metabolites were evaluated against both p65 and ATF-2 targets using two different molecular docking processes revealing quercetin-3,4'-O-diglucoside, alliospiroside C, and alliospiroside D as the most promising entities with superior binding scores. These results demonstrate that vegetable by-products, particularly, those derived from onion peels can be incorporated as natural by-product for future evaluation against wounds and osteoarthritis.

Solid lipid-based nanoparticulate system for sustained release and enhanced in-vitro cytotoxic effect of 5-fluorouracil on skin Melanoma and squamous cell carcinoma

The present study aimed to prepare solid lipid-based nanoparticles (SLNs) using Precirol® ATO 5 as solid lipid and Poloxamer 188 and Tween 80 as surfactant and co-surfactant respectively, and SLNs-derived gel for sustained delivery, enhanced in-vitro cytotoxicity, enhanced cellular uptake of 5-FU and enhanced permeation of 5-FU across the skin. The 5-FU-loaded SLNs were prepared by the hot melt encapsulation method and converted into SLN-derived gel using a gelling agent (Carbopol 940). The 5-FU-loaded SLNs had a particle size in the range of 76.82±1.48 to 327±4.46 nm, zeta potential between -11.3±2.11 and -28.4±2.40 mV, and entrapment efficiency (%) in range of 63.46±1.13 and 76.08±2.42. The FTIR analysis depicted that there was no chemical interaction between 5-FU and formulation components. Differential scanning calorimetric analysis showed thermal stability of 5-FU in the nanoparticles and powdered X-ray diffraction analysis revealed successful incorporation of 5-FU in nanoparticles. The in-vitro release study of 5-FU-loaded SLNs showed biphasic release behavior with initial burst release followed by sustained release over 48 hr. The 5-FU-loaded SLNs showed a greater cytotoxic effect on skin melanoma (B16F10 cells) and squamous cell carcinoma (A-431 cells) as compared to free 5-FU drug solution after 48 hr. Flow cytometry and fluorescence microscopy displayed enhanced quantitative and qualitative cellular uptake of SLNs. The SLNs formulation showed acceptable safety and biocompatible profile after an acute toxicity study in Wistar rats. Moreover, ex-vivo permeation studies depicted 2.13±0.076 folds enhanced flux of 5-FU-loaded SLN derived gel compared to 5-FU plain gel, and skin retention studies revealed target efficiency (%) 2.54±0.03 of 5-FU-loaded SLN derived gel compared to 5-FU plain gel.

Combinational System of Lipid-Based Nanocarriers and Biodegradable Polymers for Wound Healing: An Updated Review

Skin wounds have imposed serious socioeconomic burdens on healthcare providers and patients. There are just more than 25,000 burn injury-related deaths reported each year. Conventional treatments do not often allow the re-establishment of the function of affected regions and structures, resulting in dehydration and wound infections. Many nanocarriers, such as lipid-based systems or biobased and biodegradable polymers and their associated platforms, are favorable in wound healing due to their ability to promote cell adhesion and migration, thus improving wound healing and reducing scarring. Hence, many researchers have focused on developing new wound dressings based on such compounds with desirable effects. However, when applied in wound healing, some problems occur, such as the high cost of public health, novel treatments emphasizing reduced healthcare costs, and increasing quality of treatment outcomes. The integrated hybrid systems of lipid-based nanocarriers (LNCs) and polymer-based systems can be promising as the solution for the above problems in the wound healing process. Furthermore, novel drug delivery systems showed more effective release of therapeutic agents, suitable mimicking of the physiological environment, and improvement in the function of the single system. This review highlights recent advances in lipid-based systems and the role of lipid-based carriers and biodegradable polymers in wound healing.

Development of Adapalene Loaded Liposome Based Gel for Acne

Retinoids are considered the mainstay treatment for moderate to severe acne. Adapalene, a third-generation retinoid, has physiochemical properties which hinder the effective delivery of the drug to the skin. Therefore, the current study aimed to develop and evaluate adapalene liposomal loaded gel (ADA-LP gel) for the effective management of acne to improve tolerability and delivery to targeted sites as compared to the conventional dosage form of the drug. A novel spontaneous phase transition method (SPT) was used to formulate liposomes. Liposomal formulation (ADA-LP) was prepared and optimized based on particle size, zeta potential, and PDI. Optimized formulation was further characterized by different techniques and loaded into Carbopol gel. In vitro drug release, ex vivo permeation, and in vivo studies were performed using the prepared adapalene-loaded liposomal-based gel. The in vivo study was done employing the testosterone-induced acne model in mice. The optimized formulation had a size of 181 nm, PDI 0.145, and a zeta potential of -35 mV, indicating that the formulation was stable. Encapsulation efficiency was 89.69 ± 0.5%. ADA-LPs were loaded into the gel. Prepared ADA-LP showed a 79 ± 0.02% release of drug in a sustained manner, within 24 h. The ex vivo permeability study showed a total of 43 ± 0.06 µg/cm² of drug able to permeate through the skin within 24 h. Moreover, only 28.27 ± 0.04% was retained on the epidermis. The developed ADA-LP gel showed significant improvement in the acne lesions in mice with no visible scars and inflammation on the skin. Therefore, ADA-LP-based gel could be a promising carrier system for the safe and effective delivery of Adapalene.

Design and Evaluation of Solid Lipid Nanoparticles Loaded Topical Gels: Repurpose of Fluoxetine in Diabetic Wound Healing

The current study aimed to prepare a topical gel containing solid lipid nanoparticles (SLNs) encapsulating fluoxetine for diabetic wound healing effects. Fluoxetine (FX) was loaded into SLNs by employing an emulsion solvent evaporation technique using stearic acid as a lipid, and soya lecithin as a surfactant. SLNs were then evaluated for particle size, polydispersity index (PDI), zeta potential (ZP), percent entrapment efficiency (%EE), percent drug loading (%DL), and in vitro drug release. The optimized SLN (FS3) composed of FX (100 mg), SA (150 mg), and SA (100 mg) displayed mean particle size (467.3 ± 2.2nm), PDI (0.435 ± 0.02), ZP (-32.2 ± 4.47mV), EE (95.8 ± 3.38%), and DL (16.4 ± 2.4%). FTIR and DSC studies denote drug-polymer compatibility and the amorphous nature of FX in the SLNs. The drug release at 24 h was found to be (98.89 ± 2.57%) which followed the fickian diffusion mechanism. SLN (FS3) was further loaded into carbopol gel and tested for pH, spreadability, and extrudability of pharmaceutical parameters. In-vitro release of FX from the SLN gel and plain gel was compared, diabetic wound healing gel (DWH) showed sustained drug delivery. An in vivo study was also performed for DWH gel in streptozotocin-induced diabetic rats. Histopathological examination exhibited DWH gel-treated wounds have increased hydroxyproline, cellular proliferation, a rise in the number of blood vessels, and the level of collagen synthesis. Thus, DWH gel-loaded SLN encapsulated with FX could be a potential carrier for the effective treatment and management of diabetic wounds.

Quercetin Loaded Cationic Solid Lipid Nanoparticles in a Mucoadhesive In Situ Gel-A Novel Intravesical Therapy Tackling Bladder Cancer

The study aim was to develop an intravesical delivery system of quercetin for bladder cancer management in order to improve drug efficacy, attain a controlled release profile and extend the residence time inside the bladder. Either uncoated or chitosan coated quercetin-loaded solid lipid nanoparticles (SLNs) were prepared and evaluated in terms of colloidal, morphological and thermal characteristics. Drug encapsulation efficiency and its release behaviour were assessed. Furthermore, cytotoxicity of SLNs on T-24 cells was evaluated. Ex vivo studies were carried out using bovine bladder mucosa. Spherical SLNs (≈250 nm) ensured good entrapment efficiencies (EE > 97%) and sustained drug release up to 142 h. Cytotoxicity profile revealed concentration-dependent toxicity recording an IC50 in the range of 1.6−8.9 μg/mL quercetin. SLNs were further dispersed in in situ hydrogels comprising poloxamer 407 (20%) with mucoadhesive polymers. In situ gels exhibited acceptable gelation temperatures (around 25 °C) and long erosion time (24−27 h). SLNs loaded gels displayed remarkably enhanced retention on bladder tissues relative to SLNs dispersions. Coated SLNs exhibited better penetration abilities compared to uncoated ones, while coated SLNs dispersed in gel (G10C-St-QCT-SLNs-2) showed the highest penetration up to 350 μm. Hence, G10C-St-QCT-SLNs-2 could be considered as a platform for intravesical quercetin delivery.

Formulation of Topical Flurbiprofen Solid Lipid Nanoparticle Gel Formulation Using Hot Melt Extrusion Technique

Hot melt extrusion (HME) has been used for the formulation of topical solid lipid nanoparticle (SLN) gel without using any other size reduction technique including high pressure homogenization or sonication. SLN formulation solely using HME has not been applied to other drugs except IBU. Therefore, the purpose of the present study was to formulate FLB SLN solely using HME technique and evaluate the SLN formulation in inflammation animal model. Stable 0.5% w/v FLB SLN gel with particle size < 250 nm, PI < 0.3 and EE of > 98% was prepared. Differential scanning calorimetry (DSC) thermogram showed that the drug was converted to amorphous form in the HME process. Additionally, rheological studies demonstrated that FLB SLN gel and marketed FLB gel showed shear thinning property. FLB SLN formulation showed significantly (p < 0.05) higher peak force required to spread the formulation as compared to marketed FLB formulation. Stability studies showed that FLB SLN gel was stable for a month at room temperature and 2-4°C. Moreover, in vitro permeation test (IVPT) and ex vivo skin deposition study results revealed that FLB SLN gel showed significant (p < 0.05) increase in drug deposition in dermal layer and drug permeation as compared to control marketed formulation. Further, in vivo anti-inflammatory study showed equivalent inhibition of rat paw edema using 0.5% w/v FLB SLN gel which has 10 times less strength compared to control formulation. Overall, FLB SLN formulation was successfully manufactured solely using HME technique which resulted in enhanced the skin permeation of FLB and superior anti-inflammatory activity.

Design and Evaluation of pH Sensitive PEG-Protamine Nanocomplex of Doxorubicin for Treatment of Breast Cancer

Cancer is the most common cause of mortality worldwide. There is dire need of modern strategies—such as surface modification of nanocarriers—to combat this global illness. Incorporation of active targeting ligands has arisen as a novel platform for specific tumor targeting. The aim of the current study was to formulate PEG-protamine complex (PPC) of doxorubicin (DOX) for treatment of breast cancer (BC). DOX coupling with PEG can enhance cell-penetrating ability: combating resistance in MDA-MB 231 breast cancer cells. Ionic gelation method was adopted to fabricate a pH sensitive nanocomplex. The optimized nanoformulation was characterized for its particle diameter, zeta potential, surface morphology, entrapment efficiency, crystallinity, and molecular interaction. In vitro assay was executed to gauge the release potential of nanoformulation. The mean particle size, zeta potential, and polydispersity index (PDI) of the optimized nanoparticles were observed to be 212 nm, 15.2 mV, and 0.264, respectively. Crystallinity studies and Fourier transform infrared (FTIR) analysis revealed no molecular interaction and confirmed the amorphous nature of drug within nanoparticles. The in vitro release data indicate sustained drug release at pH 4.8, which is intracellular pH of breast cancer cells, as compared to the drug solution. PPC loaded with doxorubicin can be utilized as an alternative and effective approach for specific targeting of breast cancer.