Impact of Different Growing Substrates on Growth, Yield and Cannabinoid Content of Two Cannabis sativa L. Genotypes in a Pot Culture

Cannabis Hunger Games: nutrient stress induction in flowering stage - impact of organic and mineral fertilizer levels on biomass, cannabidiol (CBD) yield and nutrient use efficiency

Indoor medicinal cannabis cultivation systems enable year-round cultivation and better control of growing factors, however, such systems are energy and resource intensive. Nutrient deprivation during flowering can trigger nutrient translocation and modulate the production of cannabinoids, which might increase agronomic nutrient use efficiency, and thus, a more sustainable use of fertilizers. This experiment compares two fertilizer types (mineral and organic) applied in three dilutions (80, 160 and 240 mg N L-1) to evaluate the effect of nutrient deprivation during flowering on biomass, Cannabidiol (CBD) yield and nutrient use efficiency of N, P and K. This is the first study showing the potential to reduce fertilizer input while maintaining CBD yield of medicinal cannabis. Under nutrient stress, inflorescence yield was significantly lower at the final harvest, however, this was compensated by a higher CBD concentration, resulting in 95% of CBD yield using one-third less fertilizer. The higher nutrient use efficiency of N, P, and K in nutrient-deprived plants was achieved by a larger mobilization and translocation of nutrients increasing the utilization efficiency of acquired nutrients. The agronomic nutrient use efficiency of CBD yield - for N and K - increased 34% for the organic fertilizers and 72% for the mineral fertilizers comparing the dilution with one-third less nutrients (160) with the highest nutrient concentration (240). Differences in CBD yield between fertilizer types occurred only at the final harvest indicating limitations in nutrient uptake due to nutrient forms in the organic fertilizer. Our results showed a lower acquisition and utilization efficiency for the organic fertilizer, proposing the necessity to improve either the timing of bio-availability of organic fertilizers or the use of soil amendments.

Compensation of adverse growing media effects on plant growth and morphology by supplemental LED lighting

There is an increasing interest in alternatives to peat in growing media due to environmental constraints. However, plants grown in peat substitutes often show impaired growth compared to plants grown in peat-based media. Hence, it would be interesting to know whether these deficiencies can be compensated by supplementing other growth factors, e.g. light. The present study aims to investigate the interactive nature between growing media and supplemental lighting on plant growth and morphology, and to examine whether supplemental light emitting diode (LED) lighting may compensate adverse growing media effects. Basil (Ocimum basilicum L.) and Chinese cabbage (Brassica rapa subsp. pekinensis) were grown in different growing media consisting of peat, green compost, coconut pulp, wood fibre, perlite and sphagnum moss under blue, red and far-red supplemental LED lighting. We found significant interactions between growing media and supplemental photosynthetically active radiation (PAR) on plant growth, morphology and development. At low light intensities, peat-based and substituted growing media performed similarly, whereas with increasing light intensities the peat-based growing media significantly outperformed their alternatives. The substrate choice determines the required amount of supplemental light to compensate for adverse growing media effects and the amount varies depending on plant species and season. Thereby, it was indicated that red light alleviates adverse growing media effects best. We also found that far-red light is not effective when background PAR is low and becomes more effective under high background PAR. The implications and prospects of the results are discussed.

Controlled environments for cannabis cultivation to support "omics" research studies and production

The cannabis (Cannabis sativa L.) genome is highly heterozygous and, to retain genetic identity, clonal propagation of cultivars is very common. Establishing controlled environments, often involving multiple locations throughout a single grow, is critical for reliably generating materials to be used in research and production. In this article, we break down different periods of the grow cycle, such as cloning, hardening (optional), vegetative growth, flowering growth, and harvest, into individual steps. We are including images and videos for an in-depth coverage of methodological details. We are providing a list of equipment, supplies, reagents, and other resources to help with planning a grow experiment. Finally, we are discussing considerations for different aspects of controlled environments, including lighting, fertilizer regimes, and integrated pest management. With this article, it is our goal to empower researchers to reliably generate disease-free cannabis material suitable for genetic and biochemical studies that require full control of environmental factors.

Impacts of Different Light Spectra on CBD, CBDA and Terpene Concentrations in Relation to the Flower Positions of Different Cannabis Sativa L. Strains

Cannabis is one of the oldest cultivated plants, but plant breeding and cultivation are restricted by country-specific regulations. The plant has gained interest due to its medically important secondary metabolites, cannabinoids and terpenes. Besides biotic and abiotic stress factors, secondary metabolism can be manipulated by changing light quality and intensity. In this study, three morphologically different cannabis strains were grown in a greenhouse experiment under three different light spectra with three real light repetitions. The chosen light sources were as follows: a CHD Agro 400 ceramic metal-halide lamp with a sun-like broad spectrum and an R:FR ratio of 2.8, and two LED lamps, a Solray (SOL) and an AP67, with R:FR ratios of 13.49 and 4, respectively. The results of the study indicated that the considered light spectra significantly influenced CBDA and terpene concentrations in the plants. In addition to the different light spectra, the distributions of secondary metabolites were influenced by flower positions. The distributions varied between strains and indicated interactions between morphology and the chosen light spectra. Thus, the results demonstrate that secondary metabolism can be artificially manipulated by the choice of light spectrum, illuminant and intensity. Furthermore, the data imply that, besides the cannabis strain selected, flower position can have an impact on the medicinal potencies and concentrations of secondary metabolites.

Correction: Burgel et al. Impact of Different Growing Substrates on Growth, Yield and Cannabinoid Content of Two Cannabis sativa L. Genotypes in a Pot Culture. Horticulturae 2020, 6, 62

In the original publication [...]

Potential of Impedance Flow Cytometry to Assess the Viability and Quantity of Cannabis sativa L. Pollen

Over the last decade, efforts to breed new Cannabis sativa L. cultivars with high Cannabidiol (CBD) and other non-psychoactive cannabinoids with low tetrahydrocannabinol (THC) levels have increased. In this context, the identification of the viability and quantity of pollen, which represents the fitness of male gametophytes, to accomplish successful pollination is of high importance. The present study aims to evaluate the potential of impedance flow cytometry (IFC) for the assessment of pollen viability (PV) and total number of pollen cells (TPC) in two phytocannabinoid-rich cannabis genotypes, KANADA (KAN) and A4 treated with two different chemical solutions, silver thiosulfate solution (STS) and gibberellic acid (GA3). Pollen was collected over a period of 8 to 24 days after flowering (DAF) in a greenhouse experiment. Impedance flow cytometry (IFC) technology was used with Cannabis sativa to assess the viability and quantity of pollen. The results showed that the number of flowers per plant was highest at 24 DAF for both genotypes, A4 (317.78) and KAN (189.74). TPC induced by STS was significantly higher compared to GA3 over the collection period of 8 to 24 DAF with the highest mean TPC of 1.54 × 105 at 14 DAF. STS showed significantly higher viability of pollen compared to GA3 in genotype KAN, with the highest PV of 78.18% 11 DAF. Genotype A4 also showed significantly higher PV with STS at 8 (45.66%), 14 (77.88%), 18 (79.37%), and 24 (51.92%) DAF compared to GA3. Furthermore, counting the numbers of flowers did not provide insights into the quality and quantity of pollen; the results showed that PV was highest at 18 DAF with A4; however, the number of flowers per plant was 150.33 at 18 DAF and was thus not the maximum of produced flowers within the experiment. IFC technology successfully estimated the TPC and differentiated between viable and non-viable cells over a period of 8 to 24 DAF in tested genotypes of Cannabis sativa. IFC seems to be an efficient and reliable method to estimate PV, opening new chances for plant breeding and plant production processes in cannabis.

Traditional uses of Cannabis: An analysis of the CANNUSE database

ETHNOPHARMACOLOGICAL RELEVANCE

Cannabis is one of the most versatile genera in terms of plant use and has been exploited by humans for millennia. Nowadays, Cannabis is the centre of many scientific studies, most of them focusing on chemical composition and medicinal values. While new and varied applications are continuously being developed, the knowledge surrounding less common uses of the plant is slowly disappearing.

AIM OF THE REVIEW

We have analysed diversity of global data of Cannabis traditional uses, to investigate if certain plant parts are significantly associated with particular Cannabis use. We wanted to uncover potential associations between the plant parts used for the treatment of different body systems and ailments.

MATERIALS AND METHODS

We have analysed the extensive database of Cannabis traditional uses (CANNUSE). This database contains 2330 data entries of Cannabis ethnobotanical uses from over 40 countries across the world. The dataset was divided into five general groups based on the type of use: medicinal, alimentary, psychoactive, fibre and other uses. Given the abundance of human medicinal uses, detailed analysis was done on the subset of 1167 data entries. We analysed the relationship between 16 body system categories and ailments treated with Cannabis plant parts. We used a Pearson's chi-square and Fisher's exact test, to determine which Cannabis parts are characteristic of treatment for specific ailments.

RESULTS

In this dataset, the majority of reports were represented by medicinal (75.41%), followed by psychoactive (8.35%) and alimentary (7.29%) use. The most commonly used plant parts were leaf (50.51%), seed (15.38%) and inflorescence (11.35%). We found that different Cannabis plant parts were significantly associated with different uses; the leaf was typically used for medicinal, seed for alimentary and inflorescence for psychoactive use. Regarding the human medicinal uses, most common were reports for treatments of the digestive system and nutritional disorders (17.66%), nervous system and mental disorders (16.24%), followed by pain and inflammations (12.21%). We found a significant relationship between the use of certain Cannabis parts and treatment of ailments and body systems categories; leaf was significantly associated with treatment of two categories: skin and subcutaneous tissue disorders and circulatory system and blood disorders; seed use was associated with musculoskeletal system disorders and traumas; while inflorescence use shows a statistical support for treatment of nervous system and mental disorders.

CONCLUSION

Several pharmaceutical companies are intensely working on developing new drugs with isolated chemical compounds or crude extracts, almost exclusively from Cannabis inflorescences. However, our review revealed that use of leaf or seed in traditional medicine is often more important than use of inflorescence for the treatment of certain ailments. A review of traditional medicine provides a body of knowledge and an initial pathway to identify landraces and plant parts that could have an important role in future medicinal research. We are confident that traditional medicine still has a large potential for modern medicine. As more information on Cannabis diversity (genetics, biochemistry, and clinical studies) becomes available, ethnobotanical data are poised to be of much greater significance.

Agro-industrial-residues as potting media: physicochemical and biological characters and their influence on plant growth

Nursery cultivation is recognized globally as an intensive production system to support quality seedlings as well as to manage resources efficiently. Apart from other factors, potting media (PM) play a crucial role in determining the success of nursery cultivation. Worldwide, peat is the most commonly used substrate in PM because of its favorable physicochemical properties. However, due to ascending environmental and ecological concerns regarding the use of peat, a variety of new substrates have been used/tested by researchers/practitioners/growers as PM. Bark, coir pith, wood fiber, compost derived from various agro-residues, and vermicompost either alone or in combination are some of the commonly explored substrates and found to have the potential to replace peat to a greater extent. In lieu of availability, abundance, low cost, and no/low processing requirement, the use of agro-industrial residue (AIR) in the PM is the current trend. However, challenges associated with their adoption cannot be ignored. The present review is focused on providing collective information, scientific knowledge and detailed analysis of various AIR used in PM. The critical evidence-based review would help in developing a consistent approach for the identification, selection and characterization of a new renewable substrate. In addition, it would help in developing a rationale understanding of the practical and economic realities involved in the adoption of the same in PM.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13399-021-01998-6.

Impact of Three Different Light Spectra on the Yield, Morphology and Growth Trajectory of Three Different Cannabis sativa L. Strains

Cannabis is one of the oldest cultivated plants, but plant breeding and cultivation are restricted by country specific regulations. Plant growth, morphology and metabolism can be manipulated by changing light quality and intensity. Three morphologically different strains were grown under three different light spectra with three real light repetitions. Light dispersion was included into the statistical evaluation. The light spectra considered had an influence on the morphology of the plant, especially the height. Here, the shade avoidance induced by the lower R:FR ratio under the ceramic metal halide lamp (CHD) was of particular interest. The sugar leaves seemed to be of elementary importance in the last growth phase for yield composition. Furthermore, the last four weeks of flowering were crucial to influence the yield composition of Cannabis sativa L. through light spectra. The dry flower yield was significantly higher under both LED treatments compared to the conventional CHD light source. Our results indicate that the plant morphology can be artificially manipulated by the choice of light treatment to create shorter plants with more lateral branches which seem to be beneficial for yield development. Furthermore, the choice of cultivar has to be taken into account when interpreting results of light studies, as Cannabis sativa L. subspecies and thus bred strains highly differ in their phenotypic characteristics.