Influence of Algae Age and Population on the Response to TiO₂ Nanoparticles

Nanophycology, the merging of nanoscience into algal research: A review

Nanophycology is recognized as one of the most important and widely used interdisciplinary sciences by creating a connection between nanotechnology on the one hand and phycology on the other hand. Algal nanoparticle biosynthesis is a starting point in studies and research related to nanophycology. Nanophycology consists of two parts, nano and phycology, and by taking advantage of the high potential of algae such as high biological safety, easy production, fast growth, and high stability in the phycology part of this science, which is also known as algology, algae nanoparticles synthesis and make this section related to nanotechnology. In this way, algae are known as factories of biological nanomaterials and cause the production of bio-stable nanotechnology and the removal of environmental pollutants released due to nanochemistry. Nanotechnology produced by algae in the science of nanophycology, due to algae's unique physical and chemical properties compared to other biological entities such as plants, fungi, and bacteria, is used in various fields including medicine, biorefining, purification Water, etc. In this review article, the most important goals of the science of nanophycology, including the biosynthesis of algal nanoparticles and the potential of these compounds in various fields of application, have been examined and discussed.

Effects of suspended particles in the Jinjiang River Estuary on the physiological and biochemical characteristics of Microcystis flos-aquae

The effects of different concentrations (100, 150, 200, 250 mg/L) and different particle sizes (0-75 μm, 75-120 μm, 120-150 μm, 150-500 μm) on the soluble protein content, superoxide dismutase (SOD) and catalase (CAT) activity, malondialdehyde (MDA) content, chlorophyll a (Chla) content, and photosynthetic parameters of Microcystis flos-aquae were studied, and the mechanism of the effect of suspended particulate matter on the physiology and biochemistry of Microcystis flos-aquae was discussed. The results showed that the soluble protein content of Microcystis flos-aquae did not change noticeably after being stressed by suspended particles of different concentrations/diameters. The SOD activity of Microcystis flos-aquae first increased and then decreased with increasing suspended particulate matter concentrations. The SOD activity of Microcystis flos-aquae reached 28.03 U/mL when the concentration of suspended particulate matter was 100 mg/L. The CAT activity of Microcystis flos-aquae increased with increasing concentrations of suspended particles and reached a maximum value of 12.45 U/mg prot in the 250 mg/L concentration group, showing a certain dose effect. Small particles had a more significant effect on SOD, CAT, and MDA in Microcystis flos-aquae than large particles. The larger the concentration was and the smaller the particle size was, the stronger the attenuation of light and the lower the content of Chla. Both the maximum quantum yield of PSII (Fv/Fm) and the potential photosynthetic activity of PSII (Fv/F₀) of Microcystis flos-aquae increased at first and then decreased under different concentrations/sizes of suspended particles. The relative electron transfer rate gradually returned to a normal level over time. There was no significant difference in the initial slope (α) value between the treatment group and the control group, and the maximum photo synthetic rate (ETRmax) and the semilight saturation (I_k) decreased.

Interactive adverse effects of low-density polyethylene microplastics on marine microalga Chaetoceros calcitrans

Low-density polyethylene (LDPE) is broadly utilized worldwide, increasing more dramatically during the COVID-19 pandemic, and the majority ends up in the aquatic environment as microplastics. The influence of polyethylene microplastics (LDPE-MPs) on aquatic ecosystems still needs further investigation, especially on microalgae as typical organisms represented in all aquatic systems and at the base of the trophic chain. Thereby, the biological and toxicity impacts of LDPE-MPs on Chaetoceros calcitrans were examined in this work. The results revealed that LDPE-MPs had a concentration-dependent adverse effect on the growth and performance of C. calcitrans. LDPE-MPs contributed the maximum inhibition rates of 85%, 51.3%, 21.49% and 16.13% on algal growth chlorophyll content, φPSII and Fv/Fm, respectively. The total protein content, superoxide dismutase (SOD), catalase (CAT) and peroxidase (POD) activities were significantly increased at 25 mg L-1 LDPE-MPs by 1.37, 3.52, 2.75 and 1.84 folds higher than those of the controls to sustain the adverse effects of LDPE-MPs. Extracellular polymeric substance (EPS) and monosaccharides contents of C. calcitrans were improved under low concentration of LDPE-MPs, which could facilitate the adsorption of MPs particles on the microalgae cell wall. This adsorption caused significant physical damage to the algal cell structure, as observed by SEM. These results suggest that the ecological footprint of MPs may require more attention, particularly due to the continuing breakdown of plastics in the ecosystem.

Development of a calcium alginate-cellulose nanocrystal-based coating to reduce the impact of oil spills on shorelines

It is well known that oil stranded on shoreline substrates can be difficult to remove and cause serious environmental effects. To address this issue, a calcium alginate-cellulose nanocrystal (CA-CNC)-based coating with a unique surface structure and superhydrophobic properties was developed to reduce the extent of shoreline oiling. The results of batch washing test showed that not only did the introduction of CNC not reduce the oil removal efficiency; it also improved the environmental stability of the coating to resist the effects associated with seawater immersion and erosion (especially in the case of 0.4 wt% of CNC). The oil-repellent performance of the coated gravels implied that both oscillation time and oil concentration had almost no effects on the amount of adhered oil. Assessment of oiling prevention based on the laboratory shoreline tank simulator proved the coated gravel performed very well as more oil floated and less oil remained on substrates and penetrated into the subsurface. Biotoxicity analysis showed that the coating powders reduced impacts on the toxicity of the oil to algae at low doses. There is a good potential for the use of this CA-CNC based coating technique to improve shoreline oil spill response.

Toxicity evaluation of butyl acrylate on the photosynthetic pigments, chlorophyll fluorescence parameters, and oxygen evolution activity of Phaeodactylum tricornutum and Platymonas subcordiformis

Butyl acrylate is a hazardous and noxious substance (HNS) listed in the top 50 chemicals that is most likely to be involved in HNS spilling incident. At present, information about toxicity effect of butyl acrylate on marine organisms was insufficient, especially on marine microalgae. Phaeodactylum tricornutum (P. tricornutum) and Platymonas subcordiformis (P. subcordiformis) were used as test organism to evaluate the toxic effect of butyl acrylate on their photosynthetic system. Results showed that chlorophyll a (Chl-a) content, the net photosynthetic oxygen evolution rate (NOR), and chlorophyll fluorescence parameters including maximal photochemical efficiency (Fv/Fm), electron transfer rate (ETR), photochemical quenching (qP), and non-photochemical quenching (NPQ) were all stimulated in the toxic dose of 5,10, and 25 mg/L while those were significantly inhibited in the highest concentration of 25 mg/L groups after 96 h. Meanwhile, it was also found that Fv/Fm would be a suitable indicator for evaluating the toxicity of butyl acrylate on the photosynthetic system of two marine microalgae according to the analysis of Pearson correlation coefficient and integrated biomarker response (IBR). Once butyl acrylate enters the marine ecosystem, the toxicity data obtained in this study could be used as a reference for evaluating the effect of butyl acrylate on the photosynthetic capacity of marine microalgae.

Continuous measurements of volatile gases as detection of algae crop health

Wide adoption of algae cultivation to produce environmentally sustainable biofuels and fine chemicals is currently hampered by large losses (10 to 30%) incurred by grazer infections. We show the usage of real-time chemical ionization mass spectrometry to rapidly identify gaseous indicators of grazer infections in cyanobacteria cultures. Grazing was detected significantly faster (up to 3 d) using real-time mass spectrometry than the current methods of microscopy and qPCR. By employing this technology, cultivators may be empowered to treat grazer infestations sooner, thereby protecting the crop and enhancing profitability.

Algae cultivation in open raceway ponds is considered the most economical method for photosynthetically producing biomass for biofuels, chemical feedstocks, and other high-value products. One of the primary challenges for open ponds is diminished biomass yields due to attack by grazers, competitors, and infectious organisms. Higher-frequency observations are needed for detection of grazer infections, which can rapidly reduce biomass levels. In this study, real-time measurements were performed using chemical ionization mass spectrometry (CIMS) to monitor the impact of grazer infections on cyanobacterial cultures. Numerous volatile gases were produced during healthy growth periods from freshwater Synechococcus elongatus Pasteur Culture Collection (PCC) 7942, with 6-methyl-5-hepten-2-one serving as a unique metabolic indicator of exponential growth. Following the introduction of a Tetrahymena ciliate grazer, the concentrations of multiple volatile species were observed to change after a latent period as short as 18 h. Nitrogenous gases, including ammonia and pyrroline, were found to be reliable indicators of grazing. Detection of grazing by CIMS showed indicators of infections much sooner than traditional methods, microscopy, and continuous fluorescence, which did not detect changes until 37 to 76 h after CIMS detection. CIMS analysis of gases produced by PCC 7942 further shows a complex temporal array of biomass-dependent volatile gas production, which demonstrates the potential for using volatile gas analysis as a diagnostic for grazer infections. Overall, these results show promise for the use of continuous volatile metabolite monitoring for the detection of grazing in algal monocultures, potentially reducing current grazing-induced biomass losses, which could save hundreds of millions of dollars.

Synthesis, Characterization, and Anti-Algal Activity of Molybdenum-Doped Metal Oxides

In this study, we attempted to synthesize visible light active nano-sized photocatalysts using metal oxides such as zinc oxide, zirconium oxide, tungsten oxide, and strontium titanium oxide with (MoCl5)2 as a dopant by the simple ball-milling method. Fourier-transform infrared spectroscopy data confirmed the presence of M-O-Mo linkage (M = Zn, Zr, W, and SrTi) in all the molybdenum-doped metal oxides (MoMOs), but only MoZnO inhibited the growth of the bloom-forming Microcystis aeruginosa under visible light in a concentration-dependent manner up to 10 mg/L. Further, structural characterization of MoZnO using FESEM and XRD exhibited the formation of typical hexagonal wurtzite nanocrystals of approximately 4 nm. Hydroxyl radical (·OH), reactive oxygen species (ROS), and lipid peroxidation assays revealed ·OH generated by MoZnO under the visible light seemed to cause peroxidation of the lipid membrane of M. aeruginosa, which led to an upsurge of intracellular ROS and consequently introduced the agglomeration of cyanobacteria. These results demonstrated that nano-sized MoZnO photocatalyst can be easily synthesized in a cost-effective ball-mill method and utilized for biological applications such as the reduction of harmful algal blooms. Further, our study implies that a simple ball-milling method can provide an easy, green, and scalable route for the synthesis of visible light active doped metal oxides.

The Toxicity of Nanoparticles to Organisms in Freshwater

Nanotechnology is a rapidly growing industry yielding many benefits to society. However, aquatic environments are at risk as increasing amounts of nanoparticles (NPs) are contaminating waterbodies causing adverse effects on aquatic organisms. In this review, the impacts of environmental exposure to NPs, the influence of the physicochemical characteristics of NPs and the surrounding environment on toxicity and mechanisms of toxicity together with NP bioaccumulation and trophic transfer are assessed with a focus on their impacts on bacteria, algae and daphnids. We identify several gaps which need urgent attention in order to make sound decisions to protect the environment. These include uncertainty in both estimated and measured environmental concentrations of NPs for reliable risk assessment and for regulating the NP industry. In addition toxicity tests and risk assessment methodologies specific to NPs are still at the research and development stage. Also conflicting and inconsistent results on physicochemical characteristics and the fate and transport of NPs in the environment suggest the need for further research. Finally, improved understanding of the mechanisms of NP toxicity is crucial in risk assessment of NPs, since conventional toxicity tests may not reflect the risks associated with NPs. Behavioural effects may be more sensitive and would be efficient in certain situations compared with conventional toxicity tests due to low NP concentrations in field conditions. However, the development of such tests is still lacking, and further research is recommended.