Effects of Co-Processing Sewage Sludge in the Cement Kiln on PAHs, Heavy Metals Emissions and the Surrounding Environment

β-Lactoglobulin Enhances Clay and Activated Carbon Binding and Protection Properties for Cadmium and Lead

The removal of heavy metals from wastewater remains a challenge due to the limitations of current remediation methods. This study aims to develop multicomponent composites as inexpensive and environmentally friendly sorbents with enhanced capture of cadmium (Cd) and lead (Pb). The composites are based on calcium montmorillonite (CM) and activated carbon (AC) because of their proven effectiveness as sorbents for diverse toxins in environmental settings. In this study, we used a combination of computational and experimental methods to delineate that β-lactoglobulin enhances CM and AC binding and protection properties for Cd and Pb. Modeling and molecular dynamics simulations investigated the formation of material systems formed by CM and AC in complex with β-lactoglobulin and predicted their capacity to bind heavy metal ions at neutral pH conditions. Our simulations suggest that the enhanced binding properties of the material systems are attributed to the presence of several binding pockets formed by β-lactoglobulin for the two heavy metal ions. At neutral pH conditions, divalent Cd and Pb shared comparable binding propensities in all material systems, with the former being consistently higher than the latter. To validate the interactions depicted in simulations, two ecotoxicological models (L. minor and H. vulgaris) were exposed to Cd, Pb, and a mixture of the two. The inclusion of CM-lactoglobulin (β-lactoglobulin amended CM) and AC-lactoglobulin (β-lactoglobulin amended AC) at 0.05-0.2% efficiently and dose-dependently reduced the severe toxicity of metals and increased the growth parameters. This high efficacy of protection shown in the ecotoxicological models may result from the numerous possible interaction pockets of the β-lactoglobulin-amended materials depicted in simulations. The ecotoxicological models support the agreement with computations. This study serves as a proof of concept on how computations in tandem with experiments can be used in the design of multicomponent clay- and carbon-based sorbent amended systems with augmented functionalities for particular toxins.

Assessing heavy metal contamination and health risks in playground dust near cement factory: exposure levels in children

Heavy metals pose significant threats to human health, particularly children. This study aimed to assess heavy metal pollution in children's playgrounds using surface dust as an indicator and to ascertain the associated exposure levels and health risks. A total of one hundred twenty dust samples were collected from the surface of playground toys in areas surrounding the cement factory in Bursa, Türkiye, on precipitation-free days. The heavy metal content of the samples was analyzed using ICP-MS. The average total concentration of heavy metals ranged from 2401 to 6832 mg/kg across the sampling sites, with the highest values observed at PG4, PG3, PG2, and PG1, respectively. The most commonly detected heavy metals in the samples included Cr, Mn, Fe, Co, Cu, Zn, Pb, Cd, As, and Ni. Statistical analysis revealed significant positive correlations (p < 0.01) among Cr, Mn, Fe, Co, Cu, Pb, As, and Ni, with Cu and Pb also showing correlation (p < 0.05). PCA analysis identified three principal components explaining 79.905% of the total variance. The Hazard Quotient (HQ) and Hazard Index values for heavy metals were found to be below the safe threshold (HQ < 1). Quantitative techniques such as the geoaccumulation index and enrichment factor are used to determine pollution levels at the sampling sites. Overall, the results indicate that cement factories significantly contribute to heavy metal pollution, with observed values varying based on proximity to the emission source.

Applying machine learning random forest (RF) method in predicting the cement products with a co-processing of input materials: Optimizing the hyperparameters

Co-processing recycled waste during cement production, i.e., using alternative materials such as secondary raw materials or secondary raw fuels, is widely practiced in developed countries. Alternative raw materials or fuels contain high concentrations of heavy metals and other hazardous chemicals, which might lead to the potential for dangerous heavy metals and hazardous chemicals to be transferred to clinker or cement products, resulting in exposure and emissions to people or the environment. Managing input materials and predicting which inputs affect the final concentration is essential to prevent potential hazards. We used the data of six heavy metals by input raw materials and input fuels of cement manufacturers in 2016-2017. The concentrations of Pb and Cu in cement were about 10-200 times and 4 to 200 times higher than other heavy metals (Cr, As, Cd, Hg), respectively. We profiled the influence of heavy metal concentration of each input material using the principal component analysis (PCA), which analyzed the leading causes of each heavy metal. The Random Forest (RF) ensemble model predicted cement heavy metal concentrations according to input materials. In the case of Cu, Cd, and Cr, the training performance showed R square values of 0.71, 0.71, and 0.92, respectively, as a result of predicting the cement heavy metal concentration according to the heavy metal concentration of each cement input material using the RF model, which is a machine learning model. The results of this study show that the RF model can be used to predict the amount and concentration of alternative raw materials and alternative fuels by controlling the concentration of heavy metals in cement through the concentration of heavy metals in the input materials.

Occurrence, spatiotemporal trends, fate, and treatment technologies for microplastics and organic contaminants in biosolids: A review

This review provides a comprehensive overview of the occurrence, fate, treatment and multi-criteria analysis of microplastics (MPs) and organic contaminants (OCs) in biosolids. A meta-analysis was complementarily analysed through the literature to map out the occurrence and fate of MPs and 10 different groups of OCs. The data demonstrate that MPs (54.7% occurrence rate) and linear alkylbenzene sulfonate surfactants (44.2% occurrence rate) account for the highest prevalence of contaminants in biosolids. In turn, dioxin, polychlorinated biphenyls (PCBs) and phosphorus flame retardants (PFRs) have the lowest rates (<0.01%). The occurrence of several OCs (e.g., dioxin, per- and polyfluoroalkyl substances, polycyclic aromatic hydrocarbons, pharmaceutical and personal care products, ultraviolet filters, phosphate flame retardants) in Europe appear at higher rates than in Asia and the Americas. However, MP concentrations in biosolids from Australia are reported to be 10 times higher than in America and Europe, which required more measurement data for in-depth analysis. Amongst the OC groups, brominated flame retardants exhibited exceptional sorption to biosolids with partitioning coefficients (log Kd) higher than 4. To remove these contaminants from biosolids, a wide range of technologies have been developed. Our multicriteria analysis shows that anaerobic digestion is the most mature and practical. Thermal treatment is a viable option; however, it still requires additional improvements in infrastructure, legislation, and public acceptance.

Advances in the treatment of multi-pollutant flue gas in China's building materials industry

In most of the world's building material industries, the control of flue gas pollutants mainly focuses on a single pollutant. However, given the large capacity and high contribution of China's building materials industry to global air pollution, the need to develop multi-pollutant emission reduction technology is urgent. Recently, China has focused on reducing the emissions of flue gas pollutants in the building materials industry, established many key research and development projects, and gradually implemented more stringent pollutant emission limits. This project focuses on the most recent advances in flue gas emission control technology in China's building materials industry, including denitration, dust removal, desulfurization, synergistic multi-pollutant emission reduction, and the construction of pilot research and demonstration projects for pollutant removal in several building material industries. On this basis, revised pollutant limits in flue gas emitted in China's building material industry are proposed.

Cadmium-Rich Plant Powder/PAN/PU Foams with Low Thermal Conductivity

Treating and utilizing heavy metal enriched plants have become growing problems. In this work, a series of composite foams were made from the powder of Cadmium-rich plant, polyacrylonitrile (PAN) and polyurethane (PU). Test results indicated that the addition of plant powder can not only increase the specific surface area, but also improve the apparent density and thermal stability of the foams. Besides, compared with the foam without plant powder, the powder-added foams exhibited a decreasing trend for thermal conductivity, and the minimum was 0.048 w/(m·k), which indicated that the addition of plant powder can help to enhance the thermal insulation of composite foam. More importantly, the results of leaching experiment showed that the leaching rate of heavy metal cadmium in the composite foam with 50% plant powder content was as low as 0.14% after being immersed in the acidic (pH = 3) solution for 5 days, which implies that the foam materials are very safe. This study provides a new way to realize high value-added resource utilization of heavy metal-enriched plants.

Bioremediation of PAHs and heavy metals co-contaminated soils: Challenges and enhancement strategies

Systemic studies on the bioremediation of co-contaminated PAHs and heavy metals are lacking, and this paper provides an in-depth review on the topic. The released sources and transport of co-contaminated PAHs and heavy metals, including their co-occurrence through formation of cation-π interactions and their adsorption in soil are examined. Moreover, it is investigated that co-contamination of PAHs and heavy metals can drive a synergistic positive influence on bioremediation through enhanced secretion of extracellular polymeric substances (EPSs), production of biosynthetic genes, organic acid and enzymatic proliferation. However, PAHs molecular structure, PAHs-heavy metals bioavailability and their interactive cytotoxic effects on microorganisms can exert a challenging influence on the bioremediation under co-contaminated conditions. The fluctuations in bioavailability for microorganisms are associated with soil properties, chemical coordinative interactions, and biological activities under the co-contaminated PAHs-heavy metals conditions. The interactive cytotoxicity caused by the emergence of co-contaminants includes microbial cell disruption, denaturation of DNA and protein structure, and deregulation of antioxidant biological molecules. Finally, this paper presents the emerging strategies to overcome the bioavailability problems and recommends the use of biostimulation and bioaugmentation along with the microbial immobilization for enhanced bioremediation of PAHs-heavy metals co-contaminated sites. Better knowledge of the bioremediation potential is imperative to improve the use of these approaches for the sustainable and cost-effective remediation of PAHs and heavy metals co-contamination in the near future.

Characterization, Spatial Variation and Management Strategy of Sewer Sediments Collected from Combined Sewer System: A Case Study in Longgang District, Shenzhen

In the urban drainage system, the formation of sewer sediments is inevitable, and the removal of sewer sediments is necessary for system maintenance. Disposal of arisings from sewer sediment removal is becoming a serious environmental issue. The current knowledge of sewer sediments is limited, which is restrained to sewer sediments management. To better understand this municipal waste, the sewer sediments of a combined sewer system in Longgang District, Shenzhen were collected and characterized, and the spatial distribution characteristics of contaminants were analyzed. Based on the bivariate correlation analysis, it is found that many contaminants in sewer sediments have a strong relationship with spatial variables. Compared to the sewer sediments in industrial areas, those in residential areas contain higher concentrations of Hg and phosphorus. The sediments in the sewage conduit also contain more organic matter (OM), phosphorus, Cu, and Ni, and the sediments in the rainwater conduit contain a higher concentration of Cd. Moreover, the sediments produced in different catchments also show huge differences in the content of contaminants. These spatial distribution characteristics may provide help for the further classification of sewer sediments, thereby making the disposal of sediments more targeted. According to the local standards of sludge disposal, land application and incineration are not suitable for managing sewer sediments due to the low OM content and poor lower heating value (LHV). Although sanitary landfill is feasible for sewer sediments disposal, the complicated composition of sewer sediments still poses the risk of polluting the surrounding environment. The management of sewer sediments via the production of building materials is a promising technical route that can avoid the migration of hazardous contaminants and produce valuable products. This study may improve our understanding of sewer sediments and provide a reliable recommendation for sewer sediment management.

Bioaccumulation of Toxic Metals in Children Exposed to Urban Pollution and to Cement Plant Emissions

Cement plants located in urban areas can increase health risk. Although children are particularly vulnerable, biomonitoring studies are lacking. Toenail concentration of 24 metals was measured in 366 children (6-10 years), who live and attend school in a city hosting a cement plant. Living addresses and schools were geocoded and attributed to exposed or control areas, according to modeled ground concentrations of PM10 generated by the cement plant. Air levels of PM10 and NO2 were monitored. PM10 levels were higher in the exposed, than in the control area. The highest mean PM10 concentration was recorded close to the cement plant. Conversely, the highest NO2 concentration was in the control area, where vehicular traffic and home heating were the prevalent sources of pollutants. Exposed children had higher concentrations of Nickel (Ni), Cadmium (Cd), Mercury (Hg), and Arsenic (As) than controls. These concentrations correlated each other, indicating a common source. Toenail Barium (Ba) concentration was higher in the control- than in the exposed area. The location of the attended school was a predictor of Cd, Hg, Ni, Ba concentrations, after adjusting for confounders. In conclusion, children living and attending school in an urban area exposed to cement plant emissions show a chronic bioaccumulation of toxic metals, and a significant exposure to PM10 pollution. Cement plants located in populous urban areas seem therefore harmful, and primary prevention policies to protect children health are needed.

Emissions Control of Hydrochloric and Fluorhydric Acid in cement Factories from Romania

From the available statistical data, cement factories co-process a range of over 100 types of waste (sorted both industrial and household) being authorized for their use as combustion components in clinker ovens. Therefore, the level of emissions is different depending on the type of fuels and waste used. The amount of industrial and municipal co-processed waste in the Romanian cement industry from 2004 to 2013 was about 1,500,000 tons, the equivalent of municipal waste generated in a year for 18 cities with over 250,000 inhabitants. The objective of this paper was to evaluate the emission level of hydrochloric acid (HCl) and hydrofluoric acid (HF) at the clinker kilns at two cement factories in Romania for different annual time intervals and to do a comparative analysis, to estimate their compliance with legislation in force. The measurements results showed average emission levels of about 0.578 mg/Nm³ for HCl and about 0.100 mg/Nm³ for HF, in the first hours of the evening, but decreased at the beginning of the third tour, at about 0.385 mg/Nm³ for HCl, respectively, to about 0.085 mg/Nm³ for HF. The evolution of HCl and HF emission levels during the last 4 years showed a variable distribution of these acids.

Application and Selection of Remediation Technology for OCPs-Contaminated Sites by Decision-Making Methods

The production and use of organochlorine pesticides (OCPs) for agricultural and industrial applications result in high levels of their residues, posing a significant risk to environmental and human health. At present, there are many techniques for OCP-contaminated soil remediation. However, the remediation of contaminated sites may suffer from a series of problems, such as a long recovery cycle, high costs, and secondary pollution, all of which could affect land redevelopment and reuse. Therefore, the selection of an appropriate technology is crucial for contaminated sites. In order to improve and support decision-making for the selection of remediation techniques, we provide a decision-making strategy for the screening of remediation techniques of OCP-contaminated sites. The screening procedure is proposed based on combining the analytic hierarchy process (AHP) and the technique for order preference by similarity to ideal solution (TOPSIS). The screening indexes include economic indicator, environmental indicator, and technical indicator. The assessment results show that co-processing in cement kiln obtained the highest overall score and was thus considered to be the most sustainable option. This suggested remediation technology was similar to the practical remediation project, indicating that the screening method could be applied for the selection of remediation technologies for sites contaminated with persistent organic pollutants.