Dynamic Transmission of Staphylococcus Aureus in the Intensive Care Unit

Photodynamic coatings kill bacteria on near-patient surfaces in intensive care units with low light intensities

BACKGROUND

Surfaces in close proximity to patients within hospitals may cause healthcare-associated infections. These surfaces are repositories for pathogens facilitating their transmission among staff and patients. Regular cleaning and disinfection of these surfaces provides only a temporary elimination of pathogens with inevitable recontamination. Antimicrobial coatings (AMCs) of such surfaces may additionally reduce the risk of pathogen transmissions.

AIM

To evaluate the efficacy of a standard and a novel photodynamic AMC, even at very low light intensities, in a field study conducted in two ICUs at our university hospital.

METHODS

The microbial burden was determined on three coatings: standard photodynamic AMC (A), a novel photodynamic AMC (B), and an inactive AMC as control (C). The control coating C was identical to standard coating A, but it contained no photosensitizer. During a three-month period, 699 samples were collected from identical surfaces using eSwab and were analysed (cfu/cm2).

FINDINGS

Mean values of all surfaces covered with control coating (C) showed a microbial burden of 5.5 ± 14.8 cfu/cm2. Photodynamic AMC showed significantly lower mean value of 1.6 ± 4.6 cfu/cm2 (coating A; P < 0.001) and 2.7 ± 9.6 (coating B; P < 0.001). When considering a benchmark of 2.5 cfu/cm2, the relative risk for higher microbial counts was reduced by 52% (coating A) or 40% (coating B), respectively.

CONCLUSION

Both photodynamic AMCs offer a substantial, permanent risk reduction of microbial counts on near-patient surfaces in ICUs with low light intensities.

Decontamination of patient bathroom surfaces with 405 nm violet-blue light irradiation in a real-life setting

BACKGROUND

Irradiation with violet-blue light (VBL), in the spectrum of 405-450 nm, has been reported to be effective against pathogenic bacteria.

AIM

To investigate whether VBL irradiation could reduce the level of surface contamination at seven shared patient bathrooms in two wards at a hospital in Sweden.

METHODS

Repeated sampling of five separate surfaces (door handle, tap water handle, floor, toilet seat, and toilet armrest) was performed in the bathrooms where 405 nm light-emitting diode spotlights had been installed. A prospective study with a cross-over design was carried out, which included two study periods, first with the spotlights either switched on or off and a second study period with the opposite spotlight status.

FINDINGS

In total, 665 surface samples were collected during the study (133 samples per surface). Bacterial growth was found in 84% of all samples. The most common findings were coagulase-negative staphylococci and Bacillus spp. The median number of colony-forming units (cfu)/cm2 was 15 (interquartile range: 5-40) for all surfaces. In our main outcome, mean cfu/cm2 of all surfaces in a bathroom, no difference was observed with or without VBL. Clean surfaces (<5 cfu/cm2) were more commonly observed in bathrooms with VBL, also when controlling for confounding factors. No difference was observed in the number of heavily contaminated surfaces.

CONCLUSION

This study did not safely demonstrate an additive effect on bacterial surface levels when adding VBL to routine cleaning in shared patient bathrooms.

Infection Prevention and Control Strategies According to the Type of Multidrug-Resistant Bacteria and Candida auris in Intensive Care Units: A Pragmatic Resume including Pathogens R0 and a Cost-Effectiveness Analysis

Multidrug-resistant organism (MDRO) outbreaks have been steadily increasing in intensive care units (ICUs). Still, healthcare institutions and workers (HCWs) have not reached unanimity on how and when to implement infection prevention and control (IPC) strategies. We aimed to provide a pragmatic physician practice-oriented resume of strategies towards different MDRO outbreaks in ICUs. We performed a narrative review on IPC in ICUs, investigating patient-to-staff ratios; education, isolation, decolonization, screening, and hygiene practices; outbreak reporting; cost-effectiveness; reproduction numbers (R0); and future perspectives. The most effective IPC strategy remains unknown. Most studies focus on a specific pathogen or disease, making the clinician lose sight of the big picture. IPC strategies have proven their cost-effectiveness regardless of typology, country, and pathogen. A standardized, universal, pragmatic protocol for HCW education should be elaborated. Likewise, the elaboration of a rapid outbreak recognition tool (i.e., an easy-to-use mathematical model) would improve early diagnosis and prevent spreading. Further studies are needed to express views in favor or against MDRO decolonization. New promising strategies are emerging and need to be tested in the field. The lack of IPC strategy application has made and still makes ICUs major MDRO reservoirs in the community. In a not-too-distant future, genetic engineering and phage therapies could represent a plot twist in MDRO IPC strategies.

Humanized Mouse Models of Bacterial Infections

Bacterial infections continue to represent a significant healthcare burden worldwide, causing considerable mortality and morbidity every year. The emergence of multidrug-resistant bacterial strains continues to rise, posing serious risks to controlling global disease outbreaks. To develop novel and more effective treatment and vaccination programs, there is a need for clinically relevant small animal models. Since multiple bacterial species have human-specific tropism for numerous virulence factors and toxins, conventional mouse models do not fully represent human disease. Several human disease characteristic phenotypes, such as lung granulomas in the case of Mycobacterium tuberculosis infections, are absent in standard mouse models. Alternatively, certain pathogens, such as Salmonella enterica serovar typhi and Staphylococcus aureus, can be well tolerated in mice and cleared quickly. To address this, multiple groups have developed humanized mouse models and observed enhanced susceptibility to infection and a more faithful recapitulation of human disease. In the last two decades, multiple humanized mouse models have been developed to attempt to recapitulate the human immune system in a small animal model. In this review, we first discuss the history of immunodeficient mice that has enabled the engraftment of human tissue and the engraftment methods currently used in the field. We then highlight how humanized mouse models successfully uncovered critical human immune responses to various bacterial infections, including Salmonella enterica serovar Typhi, Mycobacterium tuberculosis, and Staphylococcus aureus.

The evaluation of Staphylococcus aureus and Staphylococcus epidermidis in hospital air, their antibiotic resistance and sensitivity of S. aureus to cefoxitin

Staphylococci as a nosocomial infection agent, increases the possibility of contracting diseases such as wound infection, sepsis and skin infections in humans. It was shown that Staphylococcus aureus considered as a commensal organism causing various both endemic and epidemic hospital-acquired infections. Air samples were collected from Sina Hospital, Hamadan city, which dedicated to various respiratory diseases and analysed by biochemical tests. The resistance and sensitivity of bacterial strains to the cefoxitin antibiotic were also determined. Staphylococcus aureus density (CFU/m3) were measured in the air of various wards as follows: infectious 13.35 ± 7.57, poisoning 29.84 ± 33.43, emergency 8.64 ± 2.72, eye operation room 0, recovery room 6.28 ± 4.90, skin outpatient operation room 4.71 ± 2.36, respiratory isolation 0, ICU 0.79 ± 1.36, and the administrative room 6.28 ± 5.93; while the Staphylococcus epidermidis were as follows: infectious 1.57 ± 2.35, poisoning 2.35 ± 4.08, emergency 2.35 ± 2.35, eye operation room 0, recovery room 0.78 ± 1.36, skin outpatient operation room 2.35 ± 2.35, respiratory isolation 0, ICU 2.35 ± 4.08, and the administrative room 1.57 ± 1.36. The positive and negative control samples showed a concentration of 0. Moreover, among the S. aureus isolates, 33.3% were found to be resistant to cefoxitin, while 40.6% showed to be sensitive. Based on the results, the number of active people and the type and quality of ventilation are very effective in the air quality of various wards of hospital. The poisoning section showed the most contaminated air and the highest resistance and sensitivity to the cefoxitin antibiotic.

A novel paper-based electrochemiluminescence biosensor for non-destructive detection of pathogenic bacteria in real samples

The demand for sensitive, portable, and non-destructive analysis of pathogenic bacteria is of significance in point-of-care diagnosis. Herein, we constructed a smart electrochemiluminescence (ECL) biosensor by integrating a flexible paper-based sensing device and a disposable three-electrode detecting system. Staphylococcus aureus (S. aureus)-responsive cellulose paper was prepared by employing aptamer as recognition element and a probe DNA (probe DNA-GOD) tagged with glucose oxidase (GOD) as a signal amplification unit. The formation of aptamer-S. aureus complex mediated the quantitative release of probe DNA-GOD. The remaining probe DNA-GOD on the paper-based aptasensor was then activated by glucose, which resulted in a significant decrease in ECL signal. To further improve the ECL performance of biosensor, a large number of Ru(bpy)32+ molecules were embedded into porous zinc-based metal-organic frameworks (MOFs) to form Ru(bpy)32+ functionalized MOF nanoflowers (Ru-MOF-5 NFs). Such biosensor enabled accurate, non-destructive, and real-time monitoring of S. aureus-contaminated food samples, opening a new avenue for sensitive recognition of pathogenic bacteria.

New Antibiotics for Staphylococcus aureus Infection: An Update from the World Association of Infectious Diseases and Immunological Disorders (WAidid) and the Italian Society of Anti-Infective Therapy (SITA)

Staphylococcus aureus is an extremely virulent pathogen that is capable of quickly evolving and developing antibiotic resistance. To overcome this problem, new antibiotics have been developed. Some of these have been licenced for use in clinical practice, mainly for the treatment of adults with acute skin and soft tissue infections, in addition to both community-acquired pneumonia (CAP) and nosocomial pneumonia (hospital-acquired bacterial pneumonia and ventilator-associated bacterial pneumonia). In this paper, the main characteristics and clinical use of new licenced anti-staphylococcal drugs have been discussed. In vitro studies have demonstrated that some new anti-staphylococcal antibiotics have better antimicrobial activity and, at least in certain cases, more favourable pharmacokinetic properties and higher safety and tolerability than the presently available anti-staphylococcal drugs. This suggests that they may have a potential use in reducing the risk of failure of S. aureus therapy. However, an in-depth analysis of microbiological and clinical studies carried out with these new drugs seems to indicate that further studies need to be conducted before the problem of resistance of S. aureus to the antibiotics available today can be completely solved. Considering the overall available research, the drugs that are active against S. aureus appear to present a great therapeutic opportunity for overcoming resistance to traditional therapy. There are advantages in the pharmacokinetic characteristics of some of these drugs and they have the potential to reduce hospital stays and economic costs associated with their use.

Characteristics of oral microbiome of healthcare workers in different clinical scenarios: a cross-sectional analysis

The environment of healthcare institutes (HCIs) potentially affects the internal microecology of medical workers, which is reflected not only in the well-studied gut microbiome but also in the more susceptible oral microbiome. We conducted a prospective cross-sectional cohort study in four hospital departments in Central China. Oropharyngeal swabs from 65 healthcare workers were collected and analyzed using 16S rRNA gene amplicon sequencing. The oral microbiome of healthcare workers exhibited prominent deviations in diversity, microbial structure, and predicted function. The coronary care unit (CCU) samples exhibited robust features and stability, with significantly higher abundances of genera such as Haemophilus, Fusobacterium, and Streptococcus, and a lower abundance of Prevotella. Functional prediction analysis showed that vitamin, nucleotide, and amino acid metabolisms were significantly different among the four departments. The CCU group was at a potential risk of developing periodontal disease owing to the increased abundance of F. nucleatum. Additionally, oral microbial diversification of healthcare workers was related to seniority. We described the oral microbiome profile of healthcare workers in different clinical scenarios and demonstrated that community diversity, structure, and potential functions differed markedly among departments. Intense modulation of the oral microbiome of healthcare workers occurs because of their original departments, especially in the CCU.

Passive Bioaerosol Samplers: A Complementary Tool for Bioaerosol Research. A Review

Bioaerosols consist of airborne particles of biological origin. They play an important role in our environment and may cause negative health effects. The presence of biological aerosol is typically determined using active samplers. While passive bioaerosol samplers are used much less frequently in bioaerosol investigations, they offer certain advantages, such as simple design, low cost, and long sampling duration. This review discusses different types of passive bioaerosol samplers, including their collection mechanisms, advantages and disadvantages, applicability in different sampling environments, and available sample elution and analysis methods. Most passive samplers are based on gravitational settling and electrostatic capture mechanism or their combination. We discuss the agar settle plate, dustfall collector, Personal Aeroallergen Sampler (PAAS), and settling filters among the gravity-based samplers. The described electrostatics-based samplers include electrostatic dust cloths (EDC) and Rutgers Electrostatic Passive Sampler (REPS). In addition, the review also discusses passive opportunity samplers using preexisting airflow, such as filters in HVAC systems. Overall, passive bioaerosol sampling technologies are inexpensive, easy to operate, and can continuously sample for days and even weeks which is not easily accomplished by active sampling devices. Although passive sampling devices are usually treated as qualitative tools, they still provide information about bioaerosol presence and diversity, especially over longer time scales. Overall, this review suggests that the use of passive bioaerosol samplers alongside active collection devices can aid researchers in developing a more comprehensive understanding of biological presence and dynamics, especially over extended time scales and multiple locations.

Inanimate Surfaces and Air Contamination with Multidrug Resistant Species of Staphylococcus in the Neonatal Intensive Care Unit Environment

Background: Contamination of the hospital environment with multi-resistant (MDR) Staphylococcus increases the risk of infection. The aim of this study is to identify the MDR species of Staphylococcus on inanimate surfaces, in air, and in clinical samples, and analyze the risk factors that correlate with the occurrence of infections in a Neonatal Intensive Care Unit. Methods: Samples of inanimate surfaces and air were taken using a premoistened swab (0.9% sodium chloride) and spontaneous air sedimentation, respectively. The clinical isolates were recovered from infected neonates. The isolates (environmental and clinical) were identified by matrix-assisted laser desorption ionization-time of flight and the resistance profile was calculated using the disk diffusion agar technique. Results: In total, 181 isolates were obtained, 93 from (surfaces), 18 from the air, and 70 clinical samples. S. epidermidis was the most frequent species (66.8%), and the failure rate in air cleaning was 100%. More than 60% of the isolates were MDR, and the majority of clinical isolates (60.4%) had a resistance profile identical to that of the environmental isolates. Conclusion: Staphylococcus spp. were found in most of the analyzed samples, with a high frequency of MDR isolates, demonstrating the importance of the hospital environment as a reservoir, and the need for infection control measures, and rational use of antimicrobials.

Investigations of Staphylococcal contamination on environmental surfaces of a neonatal intensive care unit of a children's hospital

Staphylococci species are known to cause healthcare-associated infections in neonatal intensive care (NICU) unit patients. Little is known about Staphylococcal contamination of NICU environments. Swabs from 25 of 46 (54%) surfaces sampled in a NICU had viable Staphylococcal contamination, with 11% contaminated by methicillin resistant Staphylococcus aureus [MRSA]. Floors by sinks and return air ducts in the NICU were the most contaminated (67% positive), possibly serving as reservoirs for Staphylococci.

Antimicrobial coatings for environmental surfaces in hospitals: a potential new pillar for prevention strategies in hygiene

Recent reports provide evidence that contaminated healthcare environments represent major sources for the acquisition and transmission of pathogens. Antimicrobial coatings (AMC) may permanently and autonomously reduce the contamination of such environmental surfaces complementing standard hygiene procedures. This review provides an overview of the current status of AMC and the demands to enable a rational application of AMC in health care settings. Firstly, a suitable laboratory test norm is required that adequately quantifies the efficacy of AMC. In particular, the frequently used wet testing (e.g. ISO 22196) must be replaced by testing under realistic, dry surface conditions. Secondly, field studies should be mandatory to provide evidence for antimicrobial efficacy under real-life conditions. The antimicrobial efficacy should be correlated to the rate of nosocomial transmission at least. Thirdly, the respective AMC technology should not add additional bacterial resistance development induced by the biocidal agents and co- or cross-resistance with antibiotic substances. Lastly, the biocidal substances used in AMC should be safe for humans and the environment. These measures should help to achieve a broader acceptance for AMC in healthcare settings and beyond. Technologies like the photodynamic approach already fulfil most of these AMC requirements.

Bacterial Contamination of Equine Dentistry Equipment-Effect of Cleaning and Disinfection

Simple Summary

Some of the equipment used in equine dentistry is difficult to clean and disinfect. Since it is vital to avoid the spread of infections in equine healthcare it is important to develop practical and easy-to-follow methods for cleaning and disinfecting dental equipment. The aim of this study was to investigate hygiene in equine dentistry. Dental equipment and the head support, where horses rest their head during dental care, were sampled for the amount of bacteria between each patient before and after dental care as well as after cleaning and/or disinfecting. The amount of bacteria was, in general, high on dental equipment and the head support after dental procedures. Bacteria were found in different amounts on most of the dental equipment after cleaning or disinfecting, which indicates a risk for spreading infections when using the equipment. For the head support, cleaning and/or disinfecting generally resulted in a reduced amount of bacteria, indicating a lowered risk for spreading infections. There is a great need for evidence-based guidelines on hygiene in equine dentistry to decrease the risk of transmitting infections between patients, facilities, and stables.

Abstract

Equine dentistry has developed immensely and human dental equipment, such as handpieces, are often used. Measures to avoid the spread of infectious microorganisms are important, but this is challenging since handpieces are difficult to decontaminate. Thus, it is necessary to develop effective IPC measures in equine dentistry. The aim of this study was to contribute to the evidence needed for future evidence-based guidelines on IPC by investigating hygiene in equine dentistry. Used handpieces and dummies (i.e., handpieces not used during dental procedure, reflecting environmental bacterial contamination) and the head support were sampled each day before the first patient, for each patient after treatment, and after decontamination. All equipment was sampled with 3M ^TM Swab Samplers and the head support additionally sampled with dip slides. After dental procedures, the detected bacterial load was often high on used handpieces, dummies, and the head support. After decontamination, handpieces did not meet the criteria for high-level disinfected equipment. In all but one case decontamination of the head support resulted in a lowered bacterial load. There is a great need for evidence-based guidelines on hygiene in equine dentistry, including IPC measures, to decrease the risk of spreading infectious microorganisms between patients, facilities, and stables.

Potential application of novel technology developed for instant decontamination of personal protective equipment before the doffing step

The use of personal protective equipment (PPE) has been considered the most effective way to avoid the contamination of healthcare workers by different microorganisms, including SARS-CoV-2. A spray disinfection technology (chamber) was developed, and its efficacy in instant decontamination of previously contaminated surfaces was evaluated in two exposure times. Seven test microorganisms were prepared and inoculated on the surface of seven types of PPE (respirator mask, face shield, shoe, glove, cap, safety glasses and lab coat). The tests were performed on previously contaminated PPE using a manikin with a motion device for exposure to the chamber with biocidal agent (sodium hypochlorite) for 10 and 30s. In 96.93% of the experimental conditions analyzed, the percentage reduction was >99% (the number of viable cells found on the surface ranged from 4.3x106 to <10 CFU/mL). The samples of E. faecalis collected from the glove showed the lowest percentages reduction, with 86.000 and 86.500% for exposure times of 10 and 30 s, respectively. The log10 reduction values varied between 0.85 log10 (E. faecalis at 30 s in glove surface) and 9.69 log10 (E. coli at 10 and 30 s in lab coat surface). In general, E. coli, S. aureus, C. freundii, P. mirabilis, C. albicans and C. parapsilosis showed susceptibility to the biocidal agent under the tested conditions, with >99% reduction after 10 and 30s, while E. faecalis and P. aeruginosa showed a lower susceptibility. The 30s exposure time was more effective for the inactivation of the tested microorganisms. The results show that the spray disinfection technology has the potential for instant decontamination of PPE, which can contribute to an additional barrier for infection control of healthcare workers in the hospital environment.