Occupational Exposure to Fine Particulate Matter (PM4 and PM2.5) during Hand-Made Cookware Operation: Personal, Indoor and Outdoor Levels

A spatial approach to assessing PM2.5 exposure level of a brickmaking community in South Africa

Globally, particulate matter with an aerodynamic diameter of 2.5 µm or less poses a significant threat to human health. The first step in quantifying human health impacts caused by exposure to PM2.5 pollution is exposure assessment. Population-weighted exposure level (PWEL) estimation is one of the methods that provides a more precise exposure assessment since it incorporates the spatiotemporal distribution of population with the pollution concentration estimate. In this study, PM2.5 exposure levels in the local communities around brickmaking industries were investigated, using the population census data of the study area and 1-year data from nine PM2.5 monitoring stations installed in and around the brickmaking industries. The observed PM2.5 data was spatially interpolated using inverse distance weight (IDW). Data on PM2.5 levels across the study area were classified based on the World Health Organization interim target (IT) guidelines and the South African National ambient air quality standard (NAAQS). An annual PM2.5 population weighted exposure level of 27.6 µg/m3 was estimated for the study area. However, seasonal exposure levels of 28.9, 37.6, 26.5, and 20.7 µg/m3 were estimated for the autumn, winter, spring, and summer seasons, respectively. This implies that local communities around the brick kiln in the Vhembe District are exposed to high levels of PM2.5, especially in winter. The PM2.5 levels in the brickmaking industries as well as its other sources in the Vhembe District, therefore, need to be lowered. Findings from population exposure level to pollutants can provide valuable data for formulating policies and recommendations on exposure reduction and public health protection.Implications: PM2.5 concentration in any given environment has high spatial and temporal variability due to the presence of diffused sources in the environment. Using ambient air concentrations to directly estimate population exposure without taking into consideration the disproportionate spatial and temporal distribution of the pollutant and the population may not yield accurate results on human exposure levels. It is, therefore, important to assess the aggregated PM2.5 exposure of a populace within a given area. This study therefore examines the PM2.5 population-weighted-exposure level of the host communities of the brickmaking industry in Vhembe District, South Africa.

Comparing PM2.5, respirable dust, and total dust fractions using real-time and gravimetric samples in an exposure chamber study

Using an exposure chamber, we investigate the precision of the DustTrak DRX monitor by comparing its results to those obtained from taking traditional gravimetric samples of two stone minerals commonly used in asphalt and lactose powder. We also discuss the possibility of using real-time monitors such as DustTrak DRX for occupational exposure monitoring purposes. The results are based on 19 days of experiment, each day with measurements collected over 4 h. Compared to the gravimetric samples, the DustTrak DRX overestimated the PM_2.5 and respirable dust concentrations, while it underestimated the total dust concentration by a factor of nearly two. However, the ratios, being done for more than one material, between the DustTrak DRX and the gravimetric sample readings varied daily and across the different exposure materials. Real-time sensors have the potential to excel at identifying exposure sources, evaluating the measured control efficiency, visualizing variations in exposure to motivate workers, and contributing to the identification of measures to be implemented to reduce exposure. For total dust, a correction factor of at least two should be used to bring its readings up to those for the corresponding gravimetric samples. Also, if the DustTrak DRX is used in the initial profiling of occupational exposure, the exposure could be considered acceptable if the readings are well below the occupational exposure limit (OELs) after correction. If the DustTrak DRX readings, after correction, is close to, or above, the accepted exposure concentrations, more thorough approaches would be required to validate the exposure.

Metal exposures from source materials for artisanal aluminum cookware

Artisanal aluminum cookware releases lead and other metals that pose significant health risk for people in low and middle-income countries. Cookware is made from recycled engine and electronic appliance parts, cans, and other materials. We obtained fourteen custom-made pots from Ghana, produced from seven different scrap aluminum sources. We sought to determine whether avoiding certain source materials could reduce leaching of metals. Cooking was simulated using dilute acetic acid and palm oil. Aluminum released from all pots exceeded recommended guidelines. Variable amounts of lead, cadmium, chromium, nickel and other metals were leached, with the most lead coming from auto radiators and mixed metals. Pots made from engine blocks did not yield detectable amounts of lead. All pots released potentially harmful concentrations of two or more metals. Selective scrap aluminum sourcing for recycled cookware does not avoid metal contamination of food, although some sources may release lower concentrations of certain metals.

Cellular mechanisms linking to outdoor and indoor air pollution damage during pregnancy

Pregnancies are a critical window period for environmental influences over the mother and the offspring. There is a growing body of evidence associating indoor and outdoor air pollution exposure to adverse pregnancy outcomes such as preterm birth and hypertensive disorders of pregnancy. Particulate matter (PM) could trigger oxi-inflammation and could also reach the placenta leading to placental damage with fetal consequences. The combination of strategies such as risk assessment, advise about risks of environmental exposures to pregnant women, together with nutritional strategies and digital solutions to monitor air quality can be effective in mitigating the effects of air pollution during pregnancy.

Ergonomic Risk Assessment during an Informal Hand-Made Cookware Operation: Extending an Existing Model

The work conducted in the informal sector is highly variable within and between days. Characterizing ergonomic exposures remains a challenge because of unstructured work settings and schedules. The existing ergonomic risk assessment tools have been widely used in formal work settings with a narrow range of exposure, and for predefined tasks that primarily constitute a daily routine. There is limited information in the literature on how they have been applied in informal workplaces. The aim of this study was to extend an existing risk assessment tool and to evaluate the applicability of the extended tool by assessing ergonomic exposure related to hand-made cookware operations. Eighteen hand-made cookware makers were recruited from six sites. A walkthrough risk assessment questionnaire was used to collect information on workers, tasks, work stations and workplace structures. The Rapid Upper Limb Assessment (RULA) screening tool was extended by including duration and vibration. An action priority matrix was used to guide intervention. According to the RULA action levels, the workers required investigation and changes soon, and immediate investigation and changes. The use of an action priority matrix was appropriate, and indicated that all the workers assessed were within the high to very high exposure domain and required immediate corrective measures. The methodology used proved to be an effective and reliable strategy for identifying ergonomic exposure among hand-made cookware makers.