Purification of Wastewater from Biomass-Derived Syngas Scrubber Using Biochar and Activated Carbons

Unraveling the multifaceted mechanisms and untapped potential of activated carbon in remediation of emerging pollutants: A comprehensive review and critical appraisal of advanced techniques

The rapid global expansion of industrialization has resulted in the discharge of a diverse range of hazardous contaminants into the ecosystem, leading to extensive environmental contamination and posing a pressing ecological concern. In this context, activated carbon (AC) has emerged as a highly promising adsorbent, offering significant advantages over conventional forms. For instance, AC has demonstrated remarkable adsorption capabilities, as evidenced by the successful removal of atrazine and ibuprofen using KOH and KOH-CO2-activated char, achieving impressive adsorption rates of 90% and 95%, respectively, at an initial dosage of 10 mg L-1. Moreover, AC can effectively adsorb aromatic compounds through π-π stacking interactions. The aromatic rings in organic molecules can align and interact with the carbon atoms in AC's structure, leading to effective adsorption. In this review, by employing a systematic analysis of recent research findings (majorly from 2015 to 2023), an in-depth exploration of AC's evolution and its wide-ranging applications in adsorbing and remediating emerging pollutants, including dyes, organic contaminants, and hazardous gases and mitigating the adverse impacts of such emerging pollutants on ecosystems have been discussed. It serves as a valuable resource for researchers, professionals, and policymakers involved in environmental remediation and pollution control, facilitating the development of sustainable and effective strategies for mitigating the global impact of emerging pollutants.

Steam gasification of char derived from refuse-derived fuel pyrolysis: adsorption behaviour in phenol solutions

The increasing waste generation trends resulted in growing attention to the technologies that aim to reduce or prevent landfilling. The pyrolysis and gasification of refuse-derived fuel (RDF) allow waste to be turned into new raw materials, like pyrolysis gas and syngas. However, the wet gas cleaning processes result in the production of highly contaminated liquid waste. Phenolic compounds are common constituents of this wastewater and often appear in the wastewater of other industries as well. In this research, the laboratory-scale steam gasification of an RDF char was performed to produce syngas and adsorbent simultaneously. The RDF was previously pyrolyzed at 700 °C maximum temperature in a Hungarian pyrolysis pilot plant with approximately 120 kg h-1 capacity. In this thermal waste processing plant, the pyrolysis gas is already utilised by burning, but currently, the char ends up in landfills. The gasification of char samples was examined with different steam-to-carbon ratios (0.56, 0.84, and 1.12) and duration (30, 60, and 120 min) at 900 °C. Following gasification, the phenol removal capability of the solid by-products was investigated. The results show that its composition and energetic properties make the produced syngas more suitable to use as a raw material in the chemical industry rather than a fuel. At lower concentrations, the effectiveness of the solid by-product for phenol removal was comparable to commercial activated carbon. These are promising results about producing activated carbon from waste without any chemical treatment.

Urban landscapes and legacy industry provide hotspots for riverine greenhouse gases: A source-to-sea study of the River Clyde

There is growing global concern that greenhouse gas (GHG) emissions from water bodies are increasing because of interactions between nutrient levels and climate warming. This paper investigates key land-cover, seasonal and hydrological controls of GHGs by comparison of the semi-natural, agricultural and urban environments in a detailed source-to-sea study of the River Clyde, Scotland. Riverine GHG concentrations were consistently oversaturated with respect to the atmosphere. High riverine concentrations of methane (CH₄) were primarily associated with point source inflows from urban wastewater treatment, abandoned coal mines and lakes, with CH₄-C concentrations between 0.1 - 44 µg l^-1. Concentrations of carbon dioxide (CO₂) and nitrous oxide (N₂O) were mainly driven by nitrogen concentrations, dominated by diffuse agricultural inputs in the upper catchment and supplemented by point source inputs from urban wastewater in the lower urban catchment, with CO₂-C concentrations between 0.1 - 2.6 mg l^-1 and N₂O-N concentrations between 0.3 - 3.4 µg l^-1. A significant and disproportionate increase in all GHGs occurred in the lower urban riverine environment in the summer, compared to the semi-natural environment, where GHG concentrations were higher in winter. This increase and change in GHG seasonal patterns points to anthropogenic impacts on microbial communities. The loss of total dissolved carbon, to the estuary is approximately 48.4 ± 3.6 Gg C yr^-1, with the annual inorganic carbon export approximately double that of organic carbon and four times that of CO_2, with CH₄ accounting for 0.03%, with the anthropogenic impact of disused coal mines accelerating DIC loss. The annual loss of total dissolved nitrogen to the estuary is approximately 4.03 ± 0.38 Gg N yr^-1 of which N₂O represents 0.06%. This study improves our understanding of riverine GHG generation and dynamics which can contribute to our knowledge of their release to the atmosphere. It identifies where action could support reductions in aquatic GHG generation and emission.

Environmental Impact Assessment by Green Processes

Global primary energy consumption has been steadily increasing since the Industrial Revolution, and it is showing no sign of slowing down in the coming years [...].

Recovery of Waste Polyurethane from E-Waste. Part II. Investigation of the Adsorption Potential for Wastewater Treatment

This study explored the performances of waste polyurethane foam (PUF) derived from the shredding of end-of-life refrigerators as an adsorbent for wastewater treatment. The waste PUF underwent a basic pre-treatment (e.g., sieving and washing) prior the adsorption tests. Three target pollutants were considered: methylene blue, phenol, and mercury. Adsorption batch tests were performed putting in contact waste PUF with aqueous solutions of the three pollutants at a solid/liquid ratio equal to 25 g/L. A commercial activated carbon (AC) was considered for comparison. The contact time necessary to reach the adsorption equilibrium was in the range of 60–140 min for waste PUF, while AC needed about 30 min. The results of the adsorption tests showed a better fit of the Freundlich isotherm model (R² = 0.93 for all pollutants) compared to the Langmuir model. The adsorption capacity of waste PUF was limited for methylene blue and mercury (K_f = 0.02), and much lower for phenol (K_f = 0.001). The removal efficiency achieved by waste PUF was lower (phenol 12% and methylene blue and mercury 37–38%) compared to AC (64–99%). The preliminary results obtained in this study can support the application of additional pre-treatments aimed to overcome the adsorption limits of the waste PUF, and it could be applied for “rough-cut” wastewater treatment.

Technology Advances in Phenol Removals: Current Progress and Future Perspectives

Phenol acts as a pollutant even at very low concentrations in water. It is classified as one of the main priority pollutants that need to be treated before being discharged into the environment. If phenolic-based compounds are discharged into the environment without any treatments, they pose serious health risks to humans, animals, and aquatic systems. This review emphasizes the development of advanced technologies for phenol removal. Several technologies have been developed to remove phenol to prevent environmental pollution, such as biological treatment, conventional technologies, and advanced technologies. Among these technologies, heterogeneous catalytic ozonation has received great attention as an effective, environmentally friendly, and sustainable process for the degradation of phenolic-based compounds, which can overcome some of the disadvantages of other technologies. Recently, zeolites have been widely used as one of the most promising catalysts in the heterogeneous catalytic ozonation process to degrade phenol and its derivatives because they provide a large specific surface area, high active site density, and excellent shape-selective properties as a catalyst. Rational design of zeolite-based catalysts with various synthesis methods and pre-defined physiochemical properties including framework, ratio of silica to alumina (SiO2/Al2O3), specific surface area, size, and porosity, must be considered to understand the reaction mechanism of phenol removal. Ultimately, recommendations for future research related to the application of catalytic ozonation technology using a zeolite-based catalyst for phenol removal are also described.