A Comparison of Bioimpedance Analysis vs. Dual X-ray Absorptiometry for Body Composition Assessment in Postpartum Women and Non-Postpartum Controls

A Pilot Study Examining the Dielectric Response of Human Forearm Tissues

This work aims to describe the dielectric behaviors of four main tissues in the human forearm using mathematical modelling, including fat, muscle, blood and bone. Multi-frequency bioimpedance analysis (MF-BIA) was initially performed using the finite element method (FEM) with a 3D forearm model to estimate impedance spectra from 10 kHz to 1 MHz, followed by a pilot study involving two healthy subjects to characterize the response of actual forearm tissues from 1 kHz to 349 kHz. Both the simulation and experimental results were fitted to a single-dispersion Cole model (SDCM) and a multi-dispersion Cole model (MDCM) to determine the Cole parameters for each tissue. Cole-type responses of both simulated and actual human forearms were observed. A paired t-test based on the root mean squared error (RMSE) values indicated that both Cole models performed comparably in fitting both simulated and measured bioimpedance data. However, MDCM exhibited higher accuracy, with a correlation coefficient (R2) of 0.99 and 0.89, RMSE of 0.22 Ω and 0.56 Ω, mean difference (mean ± standard deviation) of 0.00 ± 0.23 Ω and -0.28 ± 0.23 Ω, and mean absolute error (MAE) of 0.0007 Ω and 0.2789 Ω for the real part and imaginary part of impedance, respectively. Determining the electrical response of multi-tissues can be helpful in developing physiological monitoring of an organ or a section of the human body through MF-BIA and hemodynamic monitoring by filtering out the impedance contributions from the surrounding tissues to blood-flow-induced impedance variations.

The effects of tissue proportions on blood volume change-induced variations using bio-impedance analysis: a simulation study. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2023;2023:1-4. [PMID: 38082597 DOI: 10.1109/embc40787.2023.10340562] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Bioimpedance Analysis (BIA) along the radial artery has been widely investigated for hemodynamic monitoring. However, its applicability to different body type populations still lacks sufficient research. The Finite Element Method (FEM) was performed on three different wrist models using ANSYS HFSS, aiming to reveal the influences of different fat and muscle proportions on the sensitivity of blood volume change-induced bioimpedance change. The simulation results confirmed that the current density in each tissue mainly depended on the conductivity of tissues. The higher conductivity of the tissue, the higher current density inside said tissue. The amounts of flowing current were decided by both volume and conductivity of tissues. Moreover, increasing the fat layer thickness from 4 mm to 6 mm raised simulated impedance from 86.82 Ω to 100.39 Ω and impedance change from 0.63 Ω to 1.55 Ω. However, a higher muscle proportion occupied more injected current from the blood and resulted in lower impedance change. Therefore, for the overweight population, the placement of BIA is recommended to avoid the muscular body parts for the acquirement of better-quality pulse waves.Clinical Relevance-This establishes the bio-impedance analysis should avoid the muscular body parts for a better blood pulse wave quality for overweight populations.