Effect of Pharmaceutical Sludge Pre-Treatment with Fenton/Fenton-like Reagents on Toxicity and Anaerobic Digestion Efficiency

Pulsed versus direct current electrochemical co-catalytic peroxymonosulfate-based system: Elevated degradation and energy efficiency with enhanced oxidation mechanisms

In this work, the pulsed electrochemical (PE) system was investigated to activate peroxymonosulfate (PMS) with the addition of Fe(III) to achieve efficient degradation of sulfamethoxazole (SMX) with reduced energy consumption, in comparison with the direct current (DC) electrochemical system. The operational conditions of PE/PMS/Fe(III) system were optimized as 4 kHz pulse frequency, 50% duty cycle, and pH 3, at which 67.6% reduction of energy consumption and enhanced degradation performance were achieved compared to the DC/PMS/Fe(III) system. Results of electron paramagnetic resonance spectroscopy analysis and quenching and chemical probe experiment revealed the presence of ^•OH, SO₄^•-, and ¹O₂ in the system, with ^•OH being the dominant role. The concentrations of these active species were averagely 15 ± 1% higher in the PE/PMS/Fe(III) system than those of the DC/PMS/Fe(III) system. Identification of SMX byproducts was achieved based on high resolution mass spectrometry analysis to predict the degradation pathways. The SMX byproducts could eventually be eliminated by the PE/PMS/Fe(III) system with extended treatment time. Overall, the PE/PMS/Fe(III) system was demonstrated with high energy and degradation performance, and is appear to be an robust strategy for practical treatment of wastewater.

Efficient mitigation of emerging antibiotics residues from water matrix: Integrated approaches and sustainable technologies

The prevalence of antibiotic traces in the aquatic matrices is a concern due to the emanation of antibiotic resistance which requires a multifaceted approach. One of the potential sources is the wastewater treatment plants with a lack of advance infrastructure leading to the dissemination of contaminants. Continuous advancements in economic globalization have facilitated the application of several conventional, advanced, and hybrid techniques for the mitigation of rising antibiotic traces in the aquatic matrices that have been thoroughly scrutinized in the current paper. Although the implementation of existing mitigation techniques is associated with several limiting factors and barriers which require further research to enhance their removal efficiency. The review further summarizes the application of the microbial processes to combat antibiotic persistence in wastewater establishing a sustainable approach. However, hybrid technologies are considered as most efficient and environmental-benign due to their higher removal efficacy, energy-efficiency, and cost-effectiveness. A brief elucidation has been provided for the mechanism responsible for lowering antibiotic concentration in wastewater through biodegradation and biotransformation. Overall, the current review presents a comprehensive approach for antibiotic mitigation using existing methods however, policies and measures should be implemented for continuous monitoring and surveillance of antibiotic persistence in aquatic matrices to reduce their potential risk to humans and the environment.

Progressive Biocatalysts for the Treatment of Aqueous Systems Containing Pharmaceutical Pollutants

The review focuses on the appearance of various pharmaceutical pollutants in various water sources, which dictates the need to use various methods for effective purification and biodegradation of the compounds. The use of various biological catalysts (enzymes and cells) is discussed as one of the progressive approaches to solving problems in this area. Antibiotics, hormones, pharmaceuticals containing halogen, nonsteroidal anti-inflammatory drugs, analgesics and antiepileptic drugs are among the substrates for the biocatalysts in water purification processes that can be carried out. The use of enzymes in soluble and immobilized forms as effective biocatalysts for the biodegradation of various pharmaceutical compounds (PCPs) has been analyzed. Various living cells (bacteria, fungi, microalgae) taken as separate cultures or components of natural or artificial consortia can be involved in biocatalytic processes under aerobic or anaerobic conditions. Cells as biocatalysts introduced into water treatment systems in suspended or immobilized form are used for deep biodegradation of PCPs. The potential of combinations of biocatalysts with physical-chemical methods of wastewater treatment is evaluated in relation to the effective removing of PCPs. The review analyzes recent results and the main current trends in the development of biocatalytic approaches to biodegradation of PCPs, the pros and cons of the processes and the biocatalysts used.

Technological, Ecological, and Energy-Economic Aspects of Using Solidified Carbon Dioxide for Aerobic Granular Sludge Pre-Treatment Prior to Anaerobic Digestion

The technology of aerobic granular sludge (AGS) seems prospective in wastewater bio-treatment. The characteristics as well as compactness and structure of AGS have been proved to significantly affect the effectiveness of thus far deployed methods for sewage sludge processing, including anaerobic digestion (AD). Therefore, it is deemed necessary to extend knowledge on the possibilities of efficient AGS management and to seek viable technological solutions for methane fermentation of sludge of this type, including by means of using the pre-treatment step. Little is known about the pre-treatment method with solidified carbon dioxide (SCO₂), which can be recovered in processes of biogas upgrading and enrichment, leading to biomethane production. This study aimed to determine the impact of AGS pre-treatment with SCO₂ on the efficiency of its AD. An energy balance and a simplified economic analysis of the process were also carried out. It was found that an increasing dose of SCO₂ applied in the pre-treatment increased the concentrations of COD, N-NH₄⁺, and P-PO₄^3- in the supernatant in the range of the SCO₂/AGS volume ratios from 0.0 to 0.3. No statistically significant differences were noted above the latter value. The highest unit yields of biogas and methane production, reaching 476 ± 20 cm³/gVS and 341 ± 13 cm³/gVS, respectively, were obtained in the variant with the SCO₂/AGS ratio of 0.3. This experimental variant also produced the highest positive net energy gain, reaching 1047.85 ± 20 kWh/ton total solids (TS). The use of the higher than 0.3 SCO₂ doses was proved to significantly reduce the pH of AGS (below 6.5), thereby directly diminishing the percentage of methanogenic bacteria in the anaerobic bacterial community, which in turn contributed to a reduced CH₄ fraction in the biogas.

Biohythane Production in Hydrogen-Oriented Dark Fermentation of Aerobic Granular Sludge (AGS) Pretreated with Solidified Carbon Dioxide (SCO2)

Though deemed a prospective method, the bioconversion of organic waste to biohydrogen via dark fermentation (DF) has multiple drawbacks and limitations. Technological difficulties of hydrogen fermentation may, in part, be eliminated by making DF a viable method for biohythane production. Aerobic granular sludge (AGS) is a little-known organic waste spurring a growing interest in the municipal sector; its characteristics indicate the feasibility of its use as a substrate for biohydrogen production. The major goal of the present study was to determine the effect of AGS pretreatment with solidified carbon dioxide (SCO₂) on the yield of H₂ (biohythane) production during anaerobic digestion (AD). It was found that an increasing dose of SCO₂ caused an increase in concentrations of COD, N-NH₄⁺, and P-PO₄^3- in the supernatant at the SCO₂/AGS volume ratios from 0 to 0.3. The AGS pretreatment at SCO₂/AGS ratios within the range of 0.1-0.3 was shown to enable the production of biogas with over 8% H₂ (biohythane) content. The highest yield of biohythane production, reaching 481 ± 23 cm³/gVS, was obtained at the SCO₂/AGS ratio of 0.3. This variant produced 79.0 ± 6% CH₄ and 8.9 ± 2% H₂. The higher SCO₂ doses applied caused a significant decrease in the pH value of AGS, modifying the anaerobic bacterial community to the extent that diminished anaerobic digestion performance.