Sol gel-derived SBA-16 mesoporous material

Preliminary performance study of synthetic Alumina nanoparticles for retention of cobalt and cesium cations

In the present study, a facile nano-sized gamma alumina was synthesized and then examined for immobilization of cobalt and cesium ions individually from aqueous solutions. The comprehensive analysis of functional groups, phase composition, surface morphology and sorption characteristics of the synthesized nano-sized ϒ alumina was executed. It was deduced that acquired material was low-crystalline with a high elimination efficacy towards the concerned cations under slightly alkali and acidic conditions. Time-transient elimination scrutiny was executed and cobalt elimination rate was found relatively faster than cesium cations. Equilibrium sorption examinations confirmed that the sorption is proceeding via two diverse sites on the scavenger surface. Cobalt and cesium elimination is a spontaneous endothermic reaction of increased chaos. The attained results proved the high proficiency of the synthesized scavenger in the cations immobilization.

Ordered Mesoporous Silica Delivering siRNA as Cancer Nanotherapeutics: A Comprehensive Review

Nanosized mesoporous silica has emerged as a promising flexible platform delivering siRNA for cancer treatment. This ordered mesoporous nanosized silica provides attractive features of well-defined and tunable porosity, structure, high payload, and multiple functionalizations for targeted delivery and increasing biocompatibility over other polymeric nanocarriers. Moreover, it also overcomes the lacunae associated with traditional administration of drugs. Chemically modified porous silica matrix efficiently entraps siRNA molecules and prevents their enzymatic degradation and premature release. This Review discusses the synthesis of silica using the sol-gel approach and the advantages with different silica mesostructure. Herein, the factors affecting the synthesis of silica at nanometer scale, shape, porosity and nanoparticle surface modification are also highlighted to attain the desired nanostructured silica carriers. Additional emphasis is given to chemically modified silica delivering siRNA, where the silica nanoparticle surface was modified with different chemical moieties such as amine modified with (3-aminoropyl) triethoxysilane, polyethylenimine, chitosan, poly(ethylene glycol), and cyclodextrin polymer modification to attain high therapeutic loading, improved dispersibility and biocompatibility. Upon systemic administration, ordered mesoporous nanosized silica encounters blood cells, immune cells, and organs mainly of the reticuloendothelial system (RES). Thereby, biocompatibility and biodistribution of silica based nanocarriers are deliberated to design principles for smart and efficacious nanostructured silica-siRNA carriers and their clinical trial status. This Review further reports the future scopes and challenges for developing silica nanomaterial as a promising siRNA delivery vehicle demanding FDA approval.

Surface Modification of Mesoporous Silica Nanoparticles for Application in Targeted Delivery Systems of Antitumour Drugs

The problem of tumour therapy has attracted the attention of many researchers for many decades. One of the promising strategies for the development of new dosage forms to improve oncology treatment efficacy and minimise side effects is the development of nanoparticle-based targeted transport systems for anticancer drugs. Among inorganic nanoparticles, mesoporous silica deserves special attention due to its outstanding surface properties and drug-loading capability. This review analyses the various factors affecting the cytotoxicity, cellular uptake, and biocompatibility of mesoporous silica nanoparticles (MSNs), constituting a key aspect in the development of safe and effective drug delivery systems. Special attention is paid to technological approaches to chemically modifying MSNs to alter their surface properties. The stimuli that regulate drug release from nanoparticles are also discussed, contributing to the effective control of the delivery process in the body. The findings emphasise the importance of modifying MSNs with different surface functional groups, bio-recognisable molecules, and polymers for their potential use in anticancer drug delivery systems.

Insights into Waterflooding in Hydrocarbon-Bearing Nanochannels of Varying Cross Sections from Mesoscopic Multiphase Flow Simulations

Waterflooding is one of the geotechniques used to recover fuel sources from nanoporous geological formations. The scientific understanding of the process that involves the multiphase flow of nanoconfined fluids, however, has lagged, mainly due to the complex nanopore geometries and chemical compositions. To enable the benchmarked flow of nanoconfined fluids, architected geomaterials, such as synthesized mesoporous silica with tunable pore shapes and surface chemical properties, are used for designing and conducting experiments and simulations. This work uses a modified many-body dissipative particle dynamics (mDPD) model with accurately calibrated parameters to perform parametric flow simulations for studying the influences of waterflooding-driven power, pore shape, surface roughness, and surface wettability on the multiphase flow in heptane-saturated silica nanochannels. Remarkably, up to an 80% reduction in the effective permeability is found for water-driven heptane flow in a baseline 4.5-nm-wide slit channel when compared with the Hagen-Poiseuille equation. In the 4.5-nm-wide channels with architected surface roughness, the flow rate is found to be either higher or lower than the baseline case, depending on the shape and size of cross sections. High wettability of the solid surface by water is essential for achieving a high recovery of heptane, regardless of surface roughness. When the solid surface is less wetting or nonwetting to water, the existence of an optimal waterflooding-driven power is found to allow for the highest possible recovery. A detailed analysis of the evolution of the transient water-heptane interface in those nanochannels is presented to elucidate the underlying mechanisms that impact or dictate the multiphase flow behaviors.

Brief History, Preparation Method, and Biological Application of Mesoporous Silica Molecular Sieves: A Narrative Review

It has been more than 30 years since the first ordered mesoporous silica molecular sieve (MCM-41) was reported, but the enthusiasm for exploiting mesoporous silica is still growing due to its superior properties, such as its controllable morphology, excellent hosting capability, easy functionalization, and good biocompatibility. In this narrative review, the brief history of the discovery of mesoporous silica and several important mesoporous silica families are summarized. The development of mesoporous silica microspheres with nanoscale dimensions, hollow mesoporous silica microspheres, and dendritic mesoporous silica nanospheres is also described. Meanwhile, common synthesis methods for traditional mesoporous silica, mesoporous silica microspheres, and hollow mesoporous silica microspheres are discussed. Then, we introduce the biological applications of mesoporous silica in fields such as drug delivery, bioimaging, and biosensing. We hope this review will help people to understand the history of the development of mesoporous silica molecular sieves and become familiar with their synthesis methods and applications in biology.

A novel approach based on the ultrasonic-assisted microwave method for the efficient synthesis of Sc-MOF@SiO2 core/shell nanostructures for H2S gas adsorption: A controllable systematic study for a green future

In this work, for the first time, novel Sc-MOF@SiO₂ core/shell nanostructures have been synthesized under the optimal conditions of ultrasonic-assisted microwave routes. The final products showed small particle size distributions with homogeneous morphology (SEM results), high thermal stability (TG curve), high surface area (BET adsorption/desorption techniques), and significant porosity (BJH method). The final nanostructures of Sc-MOF@SiO₂ core/shell with such distinct properties were used as a new compound for H₂S adsorption. It was used with the systematic investigation based on a 2^K−1 factorial design, which showed high-performance adsorption of about 5 mmol/g for these novel adsorbents; the optimal experimental conditions included pressure, 1.5 bar; contact time, 20 min; and temperature, 20°C. This study and its results promise a green future for the potential control of gas pollutants.

Structure-Property Relationship for Different Mesoporous Silica Nanoparticles and its Drug Delivery Applications: A Review

Mesoporous silica nanoparticles (MSNs) are widely used as a promising candidate for drug delivery applications due to silica’s favorable biocompatibility, thermal stability, and chemical properties. Silica’s unique mesoporous structure allows for effective drug loading and controlled release at the target site. In this review, we have discussed various methods of MSNs’ mechanism, properties, and its drug delivery applications. As a result, we came to the conclusion that more in vivo biocompatibility studies, toxicity studies, bio-distribution studies and clinical research are essential for MSN advancement.

Multifunctional Mesoporous Silica Nanoparticles for Oral Drug Delivery

Nanotechnology has transformed engineering designs across a wide spectrum of materials and applications. Mesoporous Silica Nanoparticles (MSNs) are one of the new fabrications of nanostructures as medication delivery systems. MSNs have pore sizes varying from 2 to 50 nm, making them ideal for a variety of biological applications. They offer unique characteristics such as a tunable surface area, well-defined surface properties, and the ability to improve drug pharmacokinetic characteristics. Moreover, they have the potential to reduce adverse effects by delivering a precise dose of medications to a specific spot rather than the more frequent systemic delivery, which diffuses across tissues and organs. In addition, the vast number of pores allow drug incorporation and transportation of drugs to various sites making MSNs a feasible platform for orally administered drugs. Though the oral route is the most suitable and convenient platform for drug delivery, conventional oral drug delivery systems are associated with several limitations. Surpassing gastrointestinal barriers and the low oral bioavailability of poorly soluble medicines pose a major challenge in the pharmaceutical industry. This review provides insights into the role of MSNs and its mechanism as an oral drug delivery system.

Preparation of Cu cluster catalysts by simultaneous cooling-microwave heating: application in radical cascade annulation

One of the hallmarks of microwave irradiation is its selective heating mechanism. In the past 30 years, alternative designs of chemical reactors have been introduced, where the microwave (MW) absorber occupies a limited reactor volume but the surrounding environment is MW transparent. This advantage results in a different heating profile or even the possibility to quickly cool down the system. Simultaneous cooling-microwave heating has been largely adopted for organic chemical transformations. However, to the best of our knowledge there are no reports of its application in the field of nanocluster synthesis. In this work, we propose an innovative one-pot procedure for the synthesis of Cu nanoclusters. The cluster nucleation was selectively MW-activated inside the pores of a highly ordered mesoporous substrate. Once the nucleation event occurred, the crystallization reaction was instantaneously quenched, precluding the growth events and favoring the production of Cu clusters with a homogenous size distribution. Herein, we demonstrated that Cu nanoclusters could be successfully adopted for radical cascade annulations of N-alkoxybenzamides, resulting in various tricyclic and tetracyclic isoquinolones, which are widely present in lots of natural products and bioactive compounds. Compared to reported homogeneous methods, supported Cu nanoclusters provide a better platform for a green, sustainable and efficient heterogeneous approach for the synthesis of tricyclic and tetracyclic isoquinolones, avoiding a variety of toxic waste/byproducts and metal contamination in the final products.

The Opportunities and Challenges of Silica Nanomaterial for Atherosclerosis

Atherosclerosis (AS) as the leading cause of cardiovascular and cerebrovascular events has been paid much attention all the time. With the continuous development of modern medical drug treatment, surgical treatment, interventional treatment and other methods, the mortality rate of AS has shown a downward trend, while the morbidity rate is still increasing. Oral lipid-lowering or anti-inflammatory drugs are generally used for early AS, but the relatively low accumulation efficiency in lesions and the unavoidable side effects required researchers to develop more effective drug delivery approaches for the therapy of AS. Mesoporous silica nanoparticles as nanocarrier for drug delivery have received extensive attentions due to their flexible size, high specific surface area, controlled pore volume, high drug loading capacity and excellent biocompatibility. Series of good reviews about the mesoporous silica nanoparticles loaded drugs for cancer therapy have been well documented. However, their roles as nanocarrier for drug delivery to treat AS have few reports. In this review, the applications and challenges of mesoporous silica nanomaterials in the field of the diagnosis and therapy of AS have been summarized. The classification, synthesis, formation mechanism, surface modification and functionalization of mesoporous silica nanomaterials which were closely related to the theranostic effect of AS have also been included. Last but not the least, the future prospects’ suggestions of mesoporous silica nanomaterial-based drug delivery system for AS are also provided.

Synthesis, Characterization, and Catalytic Applications of the Ti-SBA-16 Porous Material in the Selective and Green Isomerizations of Limonene and S-Carvone

This work presents studies on the activity of the Ti-SBA-16 (SBA—Santa Barbara Amorphous) catalyst in the isomerization of limonene and S-carvone. The Ti-SBA-16 catalyst was synthesized by a two-step method: first, the SBA-16 material was produced, and then it was impregnated with the titanium source. The Ti-SBA-16 catalyst was subjected to detailed characterizations by means of instrumental methods: XRD (X-ray Diffraction), UV-Vis (Ultraviolet–Visible) spectroscopy, FTIR (Fourier-Transform Infrared) spectroscopy, SEM (Scanning Electron Microscopy) with EDX (Energy Dispersive X-ray) spectroscopy, and EDXRF (Energy Dispersive X-ray Fluorescence). Both limonene and S-carvone underwent isomerization over the Ti-SBA-16 catalyst. In the isomerization of limonene, the main product was terpinolene, and its highest yield amounted to 39 mol% after 300 min at 170 °C with a catalyst content of 15 wt%. Under these conditions, the conversion of limonene reached 78 mol%. In contrast, the highest yield of carvacrol (65 mol%) was obtained with the catalyst content of 15 wt%, at 200 °C, and with the conversion of S-carvone reaching 79 mol%.

Effect of Hydrophilicity of Activated Carbon Electrodes on Desalination Performance in Membrane Capacitive Deionization

Membrane capacitive deionization (MCDI) is a modification of capacitive deionization (CDI) using ion-exchange membranes (IEM) in front of the electrodes. Electrode properties, especially the specific surface area, are known to be strongly related with desalination performance in CDI, but the effects of other properties in MCDI are not fully understood. The objective of this study was to investigate the effect of hydrophilicity in activated carbon electrodes on desalination performance in MCDI. Two types of activated carbon (P60 and YS-2) whose specific surface areas were similar were used as electrode materials, but they had different hydrophilicity (i.e., P60 was originally hydrophobic and YS-2 was relatively hydrophilic due to its nitrogen-containing surface chemistry). These hydrophilic electrodes (either the electrode itself or modified with polydopamine (PDA)) led to an increase in the salt adsorption capacity (SAC) in MCDI because they facilitated the access of both ions and water molecules into the electrode pores. In particular, the SAC of the P60 electrode displayed a large increase to almost reach that of the YS-2 electrode due to the improved hydrophilicity with PDA modification and the insignificant effects of PDA modification on an already hydrophilic YS-2 electrode. Additionally, PDA-modified IEM in MCDI reduced the SAC as a result of the additional insulating PDA layer with little changes in hydrophilicity.

Solvent-free hydrogenation of cyclohexene over Rh-TUD-1 at ambient conditions

Rhodium nanoparticles (≈3–5 nm) were incorporated into the 3D mesoporous TUD-1 material by using sol–gel technique. The prepared catalyst shows high activity in the liquid phase conversion of cyclohexene to cyclohexane at room temperature (298 K), 1 atm H₂ pressure, and under solvent-free conditions. Rhodium nanoparticles exhibited high stability, reusability and negligible leaching.

Total conversion of cyclohexene to cyclohexane was achieved in a liquid phase hydrogenation reaction at room temperature, 1 atm H₂ pressure and solvent-free system.

Cl-Assisted Large Scale Synthesis of Cm-Scale Buckypapers of Fe₃C-Filled Carbon Nanotubes with Pseudo-Capacitor Properties: The Key Role of SBA-16 Catalyst Support as Synthesis Promoter

We show a novel chemical vapour deposition (CVD) approach, in which the large-scale fabrication of ferromagnetically-filled cm-scale buckypapers is achieved through the deposition of a mesoporous supported catalyst (SBA-16) on a silicon substrate. We demonstrate that SBA-16 has the crucial role of promoting the growth of carbon nanotubes (CNTs) on a horizontal plane with random orientation rather than in a vertical direction, therefore allowing a facile fabrication of cm-scale CNTs buckypapers free from the onion-crust by-product observed on the buckypaper-surface in previous reports. The morphology and composition of the obtained CNTs-buckypapers are analyzed in detail by scanning electron microscopy (SEM), Energy Dispersive X-ray (EDX), transmission electron microscopy (TEM), high resolution TEM (HRTEM), and thermogravimetric analysis (TGA), while structural analysis is performed by Rietveld Refinement of XRD data. The room temperature magnetic properties of the produced buckypapers are also investigated and reveal the presence of a high coercivity of 650 Oe. Additionally, the electrochemical performances of these buckypapers are demonstrated and reveal a behavior that is compatible with that of a pseudo-capacitor (resistive-capacitor) with better performances than those presented in other previously studied layered-buckypapers of Fe-filled CNTs, obtained by pyrolysis of dichlorobenzene-ferrocene mixtures. These measurements indicate that these materials show promise for applications in energy storage systems as flexible electrodes.

Nanoscale lanthanum oxide catalysts for self-condensation of acetone: preparation via self-assembly on anodic aluminum oxide, structure, and properties

A novel structured La

Microemulsion systems for catalytic reactions and processes

This mini-review shows the diversity of microemulsion systems for catalytic reactions with the potential for process development.

Vapour phase hydrogenation of phenol over rhodium on SBA-15 and SBA-16

In the present work, mesoporous SBA-15 and SBA-16 were synthesised using classical methods, and their physicochemical properties were investigated by X-ray diffraction (XRD), FTIR, TEM and N2 adsorption-desorption. Rhodium (Rh, 1 wt %) was loaded on the mesoporous SBA-15 and SBA-16 by an impregnation method. The Rh surface coverage, dispersion and crystallite size were determined by room temperature H2 chemisorption on reduced samples. The catalytic activity of Rh supported on mesoporous SBA-15 and SBA-16 was evaluated for the first time in the hydrogenation of phenol in vapour phase in a temperature range between 130 and 270 °C at atmospheric pressure. The reaction over Rh/SBA-15 at 180 °C produced cyclohexanone as the major product (about 60%) along with lower amounts of cyclohexanol (about 35%) and cyclohexane (about 15%). The influences of temperature, H2/phenol ratio, contact time and the nature of the solvent on the catalytic performance were systematically investigated. The Rh/SBA-16 system offered lower phenol conversion compared to Rh/SBA-15, but both have a very high selectivity for cyclohexanone (above 60%).

Synthesis of Pd(ii) organometal incorporated ordered Im3m mesostructural silica and its catalytic activity in a water-medium Sonogashira reaction

A novel mesoporous Pd(ii) catalyst exhibits high activity for Sonogashira coupling of aryl halides with phenylacetylene in aqueous medium.