Exploring kinetics of phenol biodegradation by Cupriavidus taiwanesis 187

Kinetic characterization of a new phenol degrading Acinetobacter towneri strain isolated from landfill leachate treating bioreactor

The objective of this study was to establish and to mathematically describe the phenol degrading properties of a new Acinetobacter towneri CFII-87 strain, isolated from a bioreactor treating landfill leachate. For this purpose, the biokinetic parameters of phenol biodegradation at various initial phenol concentrations of the A. towneri CFII-87 strain have been experimentally measured, and four different mathematical inhibition models (Haldane, Yano, Aiba and Edwards models) have been used to simulate the substrate-inhibited phenol degradation process. The results of the batch biodegradation experiments show that the new A. towneri CFII-87 strain grows on and metabolizes phenol up to 1000 mg/L concentration, manifests significant substrate inhibition and lag time only at concentrations above 800 mg/L phenol, and has a maximum growth rate at 300 mg/L initial phenol concentration. The comparison of the model predictions with the experimental phenol and biomass data revealed that the Haldane, Aiba and Edwards models can be used with success to describe the phenol biodegradation process by A. towneri CFII-87, while the Yano model, especially at higher initial phenol concentrations, fails to describe the process. The best performing inhibition model was the Edwards model, presenting correlation coefficients of R² > 0.98 and modelling efficiency of ME > 0.94 for the prediction of biomass and phenol concentrations on the validation datasets. The calculated biokinetic model parameters place this new strain among the bacteria with the highest tolerance towards phenol. The results suggest that the A. towneri CFII-87 strain can potentially be used in the treatment of phenolic wastewaters.

Biodegradation of phenol by Candida tropicalis sp.: Kinetics, identification of putative genes and reconstruction of catabolic pathways by genomic and transcriptomic characteristics

Candida tropicalis sp. was isolated with predominant biodegradation capability to phenol compounds, even with high concentration or in acid environment. The biodegradation of phenol was evaluated at the following concentrations 10-1750 mg L^-1, the strain exhibited well biodegradation efficiency. The maximum specific growth rate was 0.660 h^-1 and the specific biodegradation rates was 0.47 mg (phenol) [(mg (VSS) h]^-1. Differentially expressed genes were screened out, and results revealed a complete process of energy and carbon metabolism. The genes' arrangements and phylogenetic information showed the unique genetic characteristics of the strain. Catabolic pathways were reconstructed and some key phenol-degrading genes were obviously upregulated, including pheA, catA, OXCT and fadA. A notable detail that CMBL encoding carboxymethylenebutenolidase was speculated to be involved in a shortened pathway of phenol biodegradation, thereby contributing to the reconstruction of the novel phenol catabolic pathway through the hydrolases of dienelactone. Finally, key enzymes were verified by the analysis of specific activity.

Biodegradation of phenolic compounds present in palm oil mill effluent as single and mixed substrates by Trametes hirsuta AK04

The ability of white-rot fungus, Trametes hirsuta AK04, to utilize phenolics as single and mixed substrates was determined in mineral medium and palm oil mill effluent (POME). The strain AK04 was able to rapidly metabolize all ten phenolics as single and mixed substrates at all test concentrations. With single substrates, between 78 and 98% removal was achieved within seven days. The biomass yield increased with increasing concentration from 100 to 500 mg L^-1 but slightly decreased when the concentration was increased up to 1,000 mg L^-1. When fitted to a Haldane model, the groups of benzoic and cinnamic acid derivatives gave significantly higher maximum specific growth rates than other phenolics. Phenol exhibited the lowest affinity and highest inhibitory effects on fungal metabolism. In mixed substrates, the total concentration ranges of phenolics mixtures between 1,000 and 6,000 mg L^-1 did not affect the fungal growth rate and the strain AK04 showed a high degree of resistance to their toxic effects. The addition of glucose and yeast extract enhanced the degradation rates of individual phenolics in the substrate mixtures, demonstrating the advantage of this strain for treating complex media, such as industrial wastewater.

Ecological impact evaluation by constructing in situ microcosm with porous ceramic arrowhead

In recent years, bioremediation has been used as an effective technique for the cleaning of polluted sites. However, bioremediation treatment efficacy varies considerably; thus, characterization of indigenous pollutant-degrading soil microorganisms and assessment of the changes in microbial composition by pollutants are essential for designing efficient bioremediation methods. In this study, an ecological impact evaluation method that is cost-efficient and has low contamination risk was developed to assess the indigenous microbial composition. An "in situ microcosm" was constructed using a porous ceramic arrowhead. Phenol, a common environmental pollutant, was used to assess the evaluation efficacy of this method. Our data showed that phenol gradually percolated into the soil adjacent to the arrowhead and stimulated unique indigenous microorganisms (Bacillus sp., Streptomyces sp., and Cupriavidus sp.). Furthermore, the arrowhead approach enabled efficient evaluation of the ecological impact of phenol on soil microorganisms. Thus, the arrowhead method will contribute to the development of bioremediation methods.

Bioremediation of Crude Oil Using Bacterium from the Coastal Sediments of Kish Island, Iran

BACKGROUND

Much of the environment is affected by petroleum contamination. It imposes serious health problems for humans as well as serious environmental impact. Bioremediation is an important consideration for removing environmental pollutants because, compared with other technologies, it incurrs lower costs and is environmentally compatible.

METHODS

Crude oil degrading bacteria were isolated using serial dilutions of a bacterial consortium. The Taguchi experimental design L16 (4(5)) was used to optimize the biodegradation process of crude oil by the isolated strain. This investigation applied the parameters of temperature, salinity, pH, NH4Cl and FeSO4.7H2O. Modeling the kinetics of crude oil biodegradation included five batch cultivation experiments (2.5 ml/L to 40 ml/L) using crude oil as a single limiting substrate.

RESULTS

Halomonas sp. MS1 was identified using identification tests. Maximum biodegradation efficiency was predicted to occur at pH=9, temperature=30 °C, salinity=2%, NH4Cl concentration=0.4 g/L and FeSO4.7H2O=0.04 g/L. After optimization, biodagradation was significantly (P<0.05) higher (i.e. 90.65%) than it results under the original conditions. Furthermore, growth kinetics modelling of bacteria in various concentrations of crude oil showed a positive correlation between increased concentration, up to 10 ml/L and bacterial growth, but this was not evident at higher concentrations (20-40 mL/L).

CONCLUSION

Overall, bacteria in surface sediment samples from Kish Island have been determined as having good potential for application in oil biodegradation. Optimum amounts of the studied factors were determined successfully by applying the Taguchi experimental design and the models of Teissier and Haldane are suggested as kinetic models to describe the batch crude oil degradation behavior of MS1.