Radical-Mediated Enzymatic Polymerizations

Thiol-functionalized black carbon as effective and economical materials for Cr(VI) removal: Simultaneous sorption and reduction

Hazardous Cr(VI) continues to pose critical concerns for environmental and public health, demanding the development of effective remediation methods. In this study, thiol-functionalized black carbon (S-BC) was proposed for Cr(VI) removal by mixing thioglycolic acid (TGA) with black carbon (BC) derived from rice straw residue at 80 °C for 8 h. Using a 1:40 (g mL-1) BC-to-TGA ratio, the resulting S-BC40 sample demonstrated significantly enhanced Cr(VI) sorption capacities of 201.23, 145.78, and 106.60 mg g-1 at pH 3.5, 5.5, and 7.5, surpassing its BC counterpart by 2.0, 2.3, and 2.2 times. Additionally, S-BC40 converted all sorbed Cr into Cr(III) species at pH ≥ 5.5, resulting in an equal distribution of Cr(OH)3 and organic Cr(III) complexes. However, approximately 13% of Cr sorbed on BC remained as Cr(VI) at pH 3.5 and 7.5. Both C-centered and S-centered thiyl radicals might contribute to Cr(VI) reduction; however, sufficient C-S groups replenished via thiol-functionalization was the key for the complete Cr(VI) reduction on S-BC samples as pH ≥ 5.5. Thanks to the exceptional Cr(VI) sorption capacity, affordability, and accessibility, thiol-functionalization stands out as a promising modification method for BC. It presents a distinct opportunity to concurrently achieve the objectives of efficient Cr(VI) remediation and waste recycling.

Reagentless Glucose Biosensor Based on Combination of Platinum Nanostructures and Polypyrrole Layer

Two types of low-cost reagentless electrochemical glucose biosensors based on graphite rod (GR) electrodes were developed. The electrodes modified with electrochemically synthesized platinum nanostructures (PtNS), 1,10-phenanthroline-5,6-dione (PD), glucose oxidase (GOx) without and with a polypyrrole (Ppy) layer-(i) GR/PtNS/PD/GOx and (ii) GR/PtNS/PD/GOx/Ppy, respectively, were prepared and tested. Glucose biosensors based on GR/PtNS/PD/GOx and GR/PtNS/PD/GOx/Ppy electrodes were characterized by the sensitivity of 10.1 and 5.31 μA/(mM cm2), linear range (LR) up to 16.5 and 39.0 mM, limit of detection (LOD) of 0.198 and 0.561 mM, good reproducibility, and storage stability. The developed glucose biosensors based on GR/PtNS/PD/GOx/Ppy electrodes showed exceptional resistance to interfering compounds and proved to be highly efficient for the determination of glucose levels in blood serum.

Decellularized extracellular matrix and silk fibroin-based hybrid biomaterials: A comprehensive review on fabrication techniques and tissue-specific applications

Biomaterials play a fundamental role in tissue engineering by providing biochemical and physical cues that influence cellular fate and matrix development. Decellularized extracellular matrix (dECM) as a biomaterial is distinguished by its abundant composition of matrix proteins, such as collagen, elastin, fibronectin, and laminin, as well as glycosaminoglycans and proteoglycans. However, the mechanical properties of only dECM-based constructs may not always meet tissue-specific requirements. Recent advancements address this challenge by utilizing hybrid biomaterials that harness the strengths of silk fibroin (SF), which contributes the necessary mechanical properties, while dECM provides essential cellular cues for in vitro studies and tissue regeneration. This review discusses emerging trends in developing such biopolymer blends, aiming to synergistically combine the advantages of SF and dECM through optimal concentrations and desired cross-linking density. We focus on different fabrication techniques and cross-linking methods that have been utilized to fabricate various tissue-engineered hybrid constructs. Furthermore, we survey recent applications of such biomaterials for the regeneration of various tissues, including bone, cartilage, trachea, bladder, vascular graft, heart, skin, liver, and other soft tissues. Finally, the trajectory and prospects of the constructs derived from this blend in the tissue engineering field have been summarized, highlighting their potential for clinical translation.

Biohybrid Hydrogels for Tumoroid Culture

Tumoroids are 3D in vitro models that recapitulate key features of in vivo tumors, such as their architecture - hypoxic center and oxygenated outer layer - in contrast with traditional 2D cell cultures. Moreover, they may be able to preserve the patient-specific signature in terms of cell heterogeneity and mutations. Tumoroids are, therefore, interesting tools for improving the understanding of cancer biology, developing new drugs, and potentially designing personalized therapeutic plans. Currently, tumoroids are most often established using basement membrane extracts (BME), which provide a multitude of biological cues. However, BME are characterized by a lack of well-defined composition, limited reproducibility, and potential immunogenicity as a consequence of their natural origin. Synthetic polymers can overcome these problems but lack structural and biochemical complexity, which can limit the functional capabilities of organoids. Biohybrid hydrogels consisting of both natural and synthetic components can combine their advantages and offer superior 3D culture systems. In this review, it is summarized efforts devoted to producing tumoroids using different types of biohybrid hydrogels, which are classified according to their crosslinking mechanism.

The Development and Evaluation of Reagentless Glucose Biosensors Using Dendritic Gold Nanostructures as a Promising Sensing Platform

Reagentless electrochemical glucose biosensors were developed and investigated. A graphite rod (GR) electrode modified with electrochemically synthesized dendritic gold nanostructures (DGNs) and redox mediators (Med) such as ferrocenecarboxylic acid (FCA), 1,10-phenathroline-5,6-dione (PD), N,N,N',N'-tetramethylbenzidine (TMB) or tetrathiafulvalene (TTF) in combination with glucose oxidase (GOx) (GR/DGNs/FCA/GOx, GR/DGNs/PD/GOx, GR/DGNs/TMB/GOx, or GR/DGNs/TTF/GOx) were developed and electrochemically investigated. A biosensor based on threefold-layer-by-layer-deposited PD and GOx (GR/DGNs/(PD/GOx)₃) was found to be the most suitable for the determination of glucose. To improve the performance of the developed biosensor, the surface of the GR/DGNs/(PD/GOx)₃ electrode was modified with polypyrrole (Ppy) for 5 h. A glucose biosensor based on a GR/DGNs/(PD/GOx)₃/Ppy_{(5 h)} electrode was characterized using a wide linear dynamic range of up to 39.0 mmol L^-1 of glucose, sensitivity of 3.03 µA mM^-1 cm^-2, limit of detection of 0.683 mmol L^-1, and repeatability of 9.03% for a 29.4 mmol L^-1 glucose concentration. The Ppy-based glucose biosensor was characterized by a good storage stability (τ_1/2 = 9.0 days). Additionally, the performance of the developed biosensor in blood serum was investigated.

Alternative Chemistries for Free Radical-Initiated Targeting and Immobilization

Stimuli-responsive biomaterials are an emerging strategy that leverage common pathophysiological triggers to target drug delivery to limit or avoid toxic side effects. Native free radicals, such as reactive oxygen species (ROS), are widely upregulated in many pathological states. We have previously demonstrated that native ROS are capable of crosslinking and immobilizing acrylated polyethylene glycol diacrylate (PEGDA) networks and coupled payloads in tissue mimics, providing evidence for a potential targeting mechanism. To build on these promising results, we evaluated PEG dialkenes and dithiols as alternative polymer chemistries for targeting. The reactivity, toxicity, crosslinking kinetics, and immobilization potential of PEG dialkenes and dithiols were characterized. Both the alkene and thiol chemistries crosslinked in the presence of ROS, generating high molecular weight polymer networks that immobilized fluorescent payloads in tissue mimics. Thiols were especially reactive and even reacted with acrylates in the absence of free radicals, and this motivated us to explore a two-phase targeting approach. Delivering thiolated payloads in a second phase, after the initial polymer net formation, allowed greater control over the payload dosing and timing. Two-phase delivery combined with a library of radical-sensitive chemistries can enhance the versatility and flexibility of this free radical-initiated platform delivery system.

A dual initiator approach for oxygen tolerant RAFT polymerization

Reversible-deactivation radical polymerizations are privileged approaches for the synthesis of functional and hybrid materials. A bottleneck for conducting these processes is the need to maintain oxygen free conditions. Herein we report a broadly applicable approach to "polymerize through" oxygen using the synergistic combination of two radical initiators having different rates of homolysis. The in situ monitoring of the concentrations of oxygen and monomer simultaneously provided insight into the function of the two initiators and enabled the identification of conditions to effectively remove dissolved oxygen and control polymerization under open-to-air conditions. By understanding how the surface area to volume ratio of reaction vessels influence open-to-air polymerizations, well-defined polymers were produced using acrylate, styrenic, and methacrylate monomers, which each represent an expansion of scope for the "polymerizing through" oxygen approach. Demonstration of this method in tubular reactors using continuous flow chemistry provided a more complete structure-reactivity understanding of how reaction headspace influences PTO RAFT polymerizations.

Hemoglobin-catalyzed atom transfer radical polymerization for ultrasensitive electrochemical DNA detection

The use of hemoglobin (Hb) to drive atom transfer radical polymerization (ATRP) process (Hb-ATRP) for detection of lung cancer related nucleic acid is firstly reported. Hb does not need to be treated prior to using indicating the potential for synthetic engineering in complex biological microenvironments without the need for in vitro techniques. Here, we report a new signal amplification strategy using Hb-mediated graft of nitronyl niroxide monoradical polymers as a signal-on electrochemical biosensor for ultralow level DNA highly selective detection. Building DNA biosensors includes: (i) the fixation of peptide nucleic acid (PNA) probe (no phosphate group) via the 5' terminus-SH; (ii) the modification of transition metal; (iii) Site-specific markers of Hb-ATRP promoter, and (iv) the grafting of polymers with electrochemical signal by Hb-ATRP process. Through the Hb-ATRP process of nitronyl nitroxide monoradical (TEMPO), the presence of a small amount of DNA can eventually result in calling a certain number of TEMPO redox tags. Obviously, the Hb-ATRP is a method of easy source of raw materials, simple operation and no need for complex equipment. The constructed biosensor, as expected, is highly selective and sensitive to target DNA. The detection limit can be calculated as 15.96 fM under optimal conditions. The excellent performance also shows that the constructed DNA biosensor is suitable for DNA screening and DNA concentration determination in complex sample matrix.

Oxidation of Various Kraft Lignins with a Bacterial Laccase Enzyme

Modification of kraft lignin (KL), traditionally uses harsh and energy-demanding physical and chemical processes. In this study, the potential of the bacterial laccase CotA (spore coating protein A) for oxidation of KL under mild conditions was assessed. Thereby, the efficiency of CotA to oxidize both softwood and hardwood KL of varying purity at alkaline conditions was examined. For the respective type of wood, the highest oxidation activity by CotA was determined for the medium ash content softwood KL (MA_S) and the medium ash content hardwood KL (MA_H), respectively. By an up to 95% decrease in fluorescence and up to 65% in phenol content coupling of the structural lignin units was indicated. These results correlated with an increase in viscosity and molecular weight, which increased nearly 2 and 20-fold for MA_H and about 1.3 and 6.0-fold for MA_S, respectively. Thus, this study confirms that the CotA laccase can oxidize a variety of KL at alkaline conditions, while the origin and purity of KL were found to have a major impact on the efficiency of oxidation. Under the herein tested conditions, it was observed that the MA_H KL showed the highest susceptibility to CotA oxidation when compared to the other hardwood KLs and the softwood KLs. Therefore, this could be a viable method to produce sustainable resins and adhesives.

Enzyme Catalyzed Copolymerization of Lignosulfonates for Hydrophobic Coatings

Enzymatic polymerization of lignin can generate a variety of value-added products concomitantly replacing fossil-based resources. In line with this approach, a laccase from the thermophilic fungus Myceliophthora thermophila (MtL) was used to couple a hydrophobicity enhancing fluorophenol (FP) molecule, namely 4-[4-(trifluoromethyl)phenoxy]phenol (4,4-F3MPP), as a model substrate onto lignosulfonate (LS). During the coupling reaction changes in fluorescence, phenol content, viscosity and molecular weight (size exclusion chromatography; SEC) were monitored. The effects of enzymatic coupling of FP onto LS on hydrophobicity were investigated by the means of water contact angle (WCA) measurement and determination of swelling capacity. Full polymerization of LS resulting in the production of water-insoluble polymers was achieved at a pH of 7 and 33°C. Incorporation of 2% (w/v) of FP led to an increase in WCA by 59.2% while the swelling capacity showed a decrease by 216.8%. Further, Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis indicated successful covalent coupling of the FP molecule onto LS by an emerging peak at 1,320 cm^–1 in the FTIR spectrum and the evidence of Fluor in the XPS spectrum. This study shows the ability of laccase to mediate the tailoring of LS properties to produce functional polymers.

High-Throughput Routes to Biomaterials Discovery

Many existing clinical treatments are limited in their ability to completely restore decreased or lost tissue and organ function, an unenviable situation only further exacerbated by a globally aging population. As a result, the demand for new medical interventions has increased substantially over the past 20 years, with the burgeoning fields of gene therapy, tissue engineering, and regenerative medicine showing promise to offer solutions for full repair or replacement of damaged or aging tissues. Success in these fields, however, inherently relies on biomaterials that are engendered with the ability to provide the necessary biological cues mimicking native extracellular matrixes that support cell fate. Accelerating the development of such "directive" biomaterials requires a shift in current design practices toward those that enable rapid synthesis and characterization of polymeric materials and the coupling of these processes with techniques that enable similarly rapid quantification and optimization of the interactions between these new material systems and target cells and tissues. This manuscript reviews recent advances in combinatorial and high-throughput (HT) technologies applied to polymeric biomaterial synthesis, fabrication, and chemical, physical, and biological screening with targeted end-point applications in the fields of gene therapy, tissue engineering, and regenerative medicine. Limitations of, and future opportunities for, the further application of these research tools and methodologies are also discussed.

Prospects of Using Biocatalysis for the Synthesis and Modification of Polymers

Trends in the dynamically developing application of biocatalysis for the synthesis and modification of polymers over the past 5 years are considered, with an emphasis on the production of biodegradable, biocompatible and functional polymeric materials oriented to medical applications. The possibilities of using enzymes not only as catalysts for polymerization but also for the preparation of monomers for polymerization or oligomers for block copolymerization are considered. Special attention is paid to the prospects and existing limitations of biocatalytic production of new synthetic biopolymers based on natural compounds and monomers from biomass, which can lead to a huge variety of functional biomaterials. The existing experience and perspectives for the integration of bio- and chemocatalysis in this area are discussed.

Advances in polymeric ionic liquids-based smart polymeric materials: emerging fabrication strategies

Polymeric ionic liquids (PILs) are a class of materials characterized by fascinating physicochemical properties as well as tunable functionality that are quite interesting for the fabrication of materials. They have attracted tremendous attention because they are easy to prepare and can be manipulated into a polymeric matrix via covalent and noncovalent linkage/interactions to form new intelligent/smart polymeric materials with improved properties and multiple functionalities for application in many fields. These new materials are specially designed to change their performance properties when subjected to external environmental stimuli including pH, temperature, light, chemicals and electromagnetic fields. Therefore, this chapter presents the progress in the preparation of PILs via different polymerization reactions and highlights the emerging advances in the fabrication of PILs-based smart polymeric materials.

Experimental validation of eosin-mediated photo-redox polymerization mechanism and implications for signal amplification applications

When eosin-mediated, photo-redox polymerization is used to amplify signals in biosensing, oxygen has dual, opposing roles.

Baicalensines A and B, Two Isoquinoline Alkaloids from the Roots of Thalictrum baicalense

Baicalensines A (1) and B (2) were isolated from the roots of Thalictrum baicalense and structurally characterized using spectroscopic data, ¹³C NMR calculations, and the CASE algorithm. Compound 1, representing a new class of alkaloid dimers, contains berberine conjugated to a ring-opened isoquinoline. Compound 2 is the first reported natural benzylisoquinoline bearing a formyl group at C-3. Plausible biosynthetic pathways are proposed. Compound 1 exerted moderate cytotoxicity against the Caco-2 and HL-60 cell lines.

New strategy for grafting hydrophobization of lignocellulosic fiber materials with octadecylamine using a laccase/TEMPO system

The enzymatic functionalization of lignocellulosic fibers using oxidoreductases was successfully achieved by targeting lignin moieties as grafting sites on the surface. In this study, a novel strategy for hydrophobization of lignocelluloses was investigated, which involved the laccase/TEMPO-mediated grafting of octadecylamine (OA) onto both lignin and cellulose components of jute fabrics. The results showed that OA monomers were successfully grafted onto jute fabric surface using the laccase/TEMPO system with the grafting percentage and efficiency values of 0.712% and 10.571%, respectively. The primary hydroxyl groups of cellulose were oxidized by laccase/TEMPO to carbonyl groups, which were then coupled with amino-contained OA monomers via Schiff base reaction. The phenolic hydroxyl groups of lignin were transformed by laccase to radicals, on which OA molecules were grafted via Michael addition reaction. Consequently, grafted jute fabrics showed a considerable increase in the surface hydrophobicity with a contact angle of 125.9° and a wetting time of at least 2 h. Furthermore, there was an acceptable decrease in the breaking strength of jute fabrics by 13.60%, and the color of fabrics turned yellowish and reddish. This eco-friendly enzymatic process provides a new strategy for grafting hydrophobization and even functionalization of lignocellulosic fiber materials using amino compounds.

Isolation of Trametes hirsuta La-7 with high laccase-productivity and its application in metabolism of 17β-estradiol

Estrogens, which are extensive in the eco-environments, are a category of high-toxic emerging contaminants that induce metabolic disorders and even carcinogenic risks in wildlife and humans. Here we investigate whether fungus-secreted laccase can be used as a green catalyst to eliminate a representative estrogen, 17β-estradiol (E2). A white-rot fungus Trametes hirsuta La-7 with high laccase-productivity, was isolated from pig manure-contaminated soil. Extracellular laccase activity expressed by strain La-7 was 65.4 U·mL^-1 for a 3 d inoculation under the optimal fermentation parameters. The concentrated-crude laccase from Trametes hirsuta La-7 (CC-ThLac) was capable of effectively metabolizing E2 at pH 4-6, and the apparent pseudo first-order reaction rate constant and half-life values were respectively 0.027-0.055 min^-1 and 25.86-12.67 min (R² > 0.98). The mass measurement of high-resolution mass spectrometry in combination with ¹³C-isotope labeling identified that the main by-products of E2 metabolism were dimers, trimers, and tetramers, which are consistent with radical-driven C-C and/or C-O-C covalent coupling pathway, involving the initial enzymatic production of phenoxy radical intermediates and then the successive oxidative-oligomerization of radical intermediates. The formation of oligomers dramatically reduced the estrogenic activity of E2. Additionally, CC-ThLac also exhibited high-efficiency metabolism capability toward E2 in the natural water and pig manure, with more than 94.4% and 91.0% of E2 having been metabolized, respectively. These findings provide a broad prospect for the clean biotechnological applications of Trametes hirsuta La-7 in estrogen-contaminated ecosystems.

Linear Polymerization of Protein by Sterically Controlled Enzymatic Cross-Linking with a Tyrosine-Containing Peptide Loop

The structure of a protein complex needs to be controlled appropriately to maximize its functions. Herein, we report the linear polymerization of bacterial alkaline phosphatase (BAP) through the site-specific cross-linking reaction catalyzed by Trametes sp. laccase (TL). We introduced a peptide loop containing a tyrosine (Y-Loop) to BAP, and the Y-Looped BAP was treated with TL. The Y-Looped BAP formed linear polymers, whereas BAP fused with a C-terminal peptide containing a tyrosine (Y-tag) showed an irregular shape after TL treatment. The sterically confined structure of the Y-Loop could be responsible for the formation of linear BAP polymers. TL-catalyzed copolymerization of Y-Looped BAP and a Y-tagged chimeric antibody-binding protein, pG₂pA-Y, resulted in the formation of linear bifunctional protein copolymers that could be employed as protein probes in an enzyme-linked immunosorbent assay (ELISA). Copolymers comprising Y-Looped BAP and pG₂pA-Y at a molar ratio of 100:1 exhibited the highest signal in the ELISA with 26- and 20-fold higher than a genetically fused chimeric protein, BAP-pG₂pA-Y, and its polymeric form, respectively. This result revealed that the morphology of the copolymers was the most critical feature to improve the functionality of the protein polymers as detection probes, not only for immunoassays but also for other diagnostic applications.

Radical polymerization reactions for amplified biodetection signals

This review summarizes various radical polymerization chemistries for amplifying biodetection signals and compares them from the practical point of view.

Enzyme-initiated free radical polymerizations of vinyl monomers using horseradish peroxidase

In this chapter, we highlight the use of horseradish peroxidase (HRP) as a catalyst to initiate free radical polymerizations of vinyl monomers under benign reaction conditions. A variety of vinyl monomers, including 4-acryloylmorpholine (AM), 2-hydroxyethyl methacrylate (HEMA), and poly(ethylene glycol) methyl ether acrylate (PEGA) were polymerized. The enzyme converts exogenous hydrogen peroxide into a usable radical source, which when coupled with a β-diketone, yields a radical that initiates chain growth in the presence of monomers. The resulting polymers were characterized using nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC). By using enzymatic free radical polymerizations, polymers can be generated in a sustainable, environmentally-friendly, and scalable fashion.

Visible-light-mediated, additive-free, and open-to-air controlled radical polymerization of acrylates and acrylamides

Oxygen tolerance in ontrolled radical polymerizations has been an active field of study in recent years. Herein, we report a photocontrolled, additive-free iniferter polymerization that operates in completely open vials utilizing the "polymerizing through oxygen" mechanism. Trithiocarbonates are directly activated with high intensity 450 nm light to produce narrowly dispersed (M w/M n = 1.1-1.6) polyacrylates and polyacrylamides in only 1 hour of irradiation. Living behavior is demonstrated through chain extension, block copolymer synthesis, and control over molecular weight through varying the monomer:iniferter ratio. A slight increase in induction period is observed for the open vial polymerization compared to the air-free reaction, but polymers with similar M n and M w/M n values are produced after 30-60 minutes of irradiation. This system will provide a convenient platform for living additive manufacturing because of its fast reaction time, air tolerance, wide monomer scope, and lack of any additives beyond the monomer, iniferter, and DMSO solvent.

Investigating the Mechanism of Horseradish Peroxidase as a RAFT-Initiase

A detailed mechanistic and kinetic study of enzymatically initiated RAFT polymerization is performed by combining enzymatic assays and polymerization kinetics analysis. Horseradish peroxidase (HRP) initiated RAFT polymerization of dimethylacrylamide (DMAm) was studied. This polymerization was controlled by 2-(propionic acid)ylethyl trithiocarbonate (PAETC) in the presence of H₂O₂ as a substrate and acetylacetone (ACAC) as a mediator. In general, well controlled polymers with narrow molecular weight distributions and good agreement between theoretical and measured molecular weights are consistently obtained by this method. Kinetic and enzymatic assay analyses show that HRP loading accelerates the reaction, with a critical concentration of ACAC needed to effectively generate polymerization initiating radicals. The PAETC RAFT agent is required to control the reaction, although the RAFT agent also has an inhibitory effect on enzymatic performance and polymerization. Interestingly, although H₂O₂ is the substrate for HRP there is an optimal concentration near 1 mM, under the conditions studies, with higher or lower concentrations leading to lower polymerization rates and poorer enzymatic activity. This is explained through a competition between the H₂O₂ acting as a substrate, but also an inhibitor of HRP at high concentrations.

Up in the air: oxygen tolerance in controlled/living radical polymerisation

The requirement for deoxygenation in controlled/living radical polymerisation (CLRP) places significant limitations on its widespread implementation by necessitating the use of large reaction volumes, sealed reaction vessels as well as requiring access to specialised equipment such as a glove box and/or inert gas source. As a result, in recent years there has been intense interest in developing strategies for overcoming the effects of oxygen inhibition in CLRP and therefore remove the necessity for deoxygenation. In this review, we highlight several strategies for achieving oxygen tolerant CLRP including: "polymerising through" oxygen, enzyme mediated deoxygenation and the continuous regeneration of a redox-active catalyst. In order to provide further clarity to the field, we also establish some basic parameters for evaluating the degree of "oxygen tolerance" that can be achieved using a given oxygen scrubbing strategy. Finally, we propose some applications that could most benefit from the implementation of oxygen tolerant CLRP and provide a perspective on the future direction of this field.

Oxidoreductase-Initiated Radical Polymerizations to Design Hydrogels and Micro/Nanogels: Mechanism, Molding, and Applications

Due to their 3D cross-linked networks and tunable physicochemical properties, polymer hydrogels with different sizes are applied widely in tissue engineering, drug-delivery systems, pollution regulation, ionic conducting electrolytes, agricultural drought-resistance, cosmetics, and the food industry. Novel, environmentally friendly, and efficient oxidoreductase-initiated radical polymerizations to design hydrogels and micro/nanogels have gained increasing attention. Herein, the recent advances on the use of novel enzyme-initiated systems for hydrogel polymerization, including the mechanisms, and molding of polymeric and hybrid-polymeric networks are reviewed. Preliminary progress related to interfacial enzymatic polymerization for the generation of hybrid micro/nanogels is introduced as an emerging initiating approach. In addition, certain biological applications in tissue engineering, bioimaging, and therapy are demonstrated step by step. Finally, some perspectives on the safety profile of enzymatic formed hydrogels, new enzymatic systems, and potential theranostic applications are discussed.

Controlling Enzymatic Polymerization from Surfaces with Switchable Bioaffinity

The affinity of surfaces toward proteins is found to be a key parameter to govern the synthesis of polymer brushes by surface-initiated biocatalytic atom transfer radical polymerization (SI-bioATRP). While the "ATRPase" hemoglobin (Hb) stimulates only a relatively slow growth of protein repellent brushes, the synthesis of thermoresponsive grafts can be regulated by switching the polymer's attraction toward proteins across its lower critical solution temperature (LCST). Poly(N-isopropylacrylamide) (PNIPAM) brushes are synthesized in discrete steps of thickness at temperatures above LCST, while the biocatalyst layer is refreshed at T < LCST. Multistep surface-initiated biocatalytic ATRP demonstrates a high degree of control, results in high chain end group fidelity and enables the synthesis of multiblock copolymer brushes under fully aqueous conditions. The activity of Hb can be further modulated by tuning the accessibility of the heme pocket within the protein. Hence, the multistep polymerization is accelerated at acid pH, where the enzyme undergoes a transition from its native to a molten globule conformation. The controlled synthesis of polymer brushes by multistep SI-bioATRP highlights how a biocatalytic synthesis of grafted polymer films can be precisely controlled through the modulation of the polymer's interfacial physicochemical properties, in particular of the affinity of the surface toward proteins. This is not only of importance to gain a predictive understanding of surface-confined enzymatic polymerizations, but also represents a new way to translate bioadhesion into a controlled functionalization of materials.

Oxygen-tuned nanozyme polymerization for the preparation of hydrogels with printable and antibacterial properties

Nanozymes merge nanotechnology with biology and provide a lower cost and higher stability options, compared to that of natural enzymes. However, nanozyme catalyzed polymerization under physiological conditions is still a big challenge due to heavy oxygen inhibition. In this study, the simple glucose oxidase system can effectively adjust oxygen concentration and generate hydrogen peroxide, which assists in the realization of nanozyme-catalyzed polymerization. The nanozyme based hydrogel is printable due to its mild preparation with gradually increased viscosity. The antibacterial performance is ascribed to the in situ generated hydroxyl radical via the reaction of the bound nanozyme and glucose.

Caralluma umbellata Peroxidase: Biochemical Characterization and Its Detoxification Potentials in Comparison with Horseradish Peroxidase

Caralluma umbellata peroxidase (CUP) is an acidic heme-containing protein having a molecular weight of ~42 kDa and is specific to guaiacol. It is not a glycoprotein. It was purified to 12.5-fold purity with 6.16 % yield. Its activity is dependent on hydrogen peroxide and has an optimum pH and temperature of 6.2 and 45 °C respectively. It can decolorize dyes, viz., Aniline Blue, Reactive Black 5, and Reactive Blue 19 but not Congo Red, while HRP can decolorize Congo Red also. It has lignin-degrading potentiality as it can decompose veratryl alcohol. Detoxification of phenol was more by CUP compared to HRP while with p-nitrophenol HRP has a greater detoxification rate. Based on our results, CUP was identified to be capable of oxidizing a variety of hazardous substances and also a lignin-degrading plant biocatalyst.

Laccase-mediated formation of mesoporous silica nanoparticle based redox stimuli-responsive hybrid nanogels as a multifunctional nanotheranostic agent

In this work, we designed a new hybrid nanogel with redox responsive polymer gel shells and mesoporous silica nanoparticles (MSNs) cores via laccase-mediated radical polymerization. The successful coating of the responsive gel shells on the MSNs was confirmed by the morphology and increased diameters of the particles as determined by transmission electron microscopy (TEM) and dynamic light scattering (DLS). As observed by scanning transmission electron microscopy (STEM) and energy dispersive X-ray spectroscopy (EDS), the presence of the element S around the MSNs further confirmed the formation of the gel shell. When loaded with doxorubicin (DOX), these hybrid nanogels had a significantly higher cumulative DOX release in a reductive environment than that found under physiological conditions. The MSNs with mesoporous channels were loaded with perfluorohexane (PFH) for ultrasound imaging, which was enhanced by the presence of the elastic gel shells.