Screening the Expression Changes in MicroRNAs and Their Target Genes in Mature Cementoblasts Stimulated with Cyclic Tensile Stress

Tooth-Supporting Hard Tissue Regeneration Using Biopolymeric Material Fabrication Strategies

The mineralized tissues (alveolar bone and cementum) are the major components of periodontal tissues and play a critical role to anchor periodontal ligament (PDL) to tooth-root surfaces. The integrated multiple tissues could generate biological or physiological responses to transmitted biomechanical forces by mastication or occlusion. However, due to periodontitis or traumatic injuries, affect destruction or progressive damage of periodontal hard tissues including PDL could be affected and consequently lead to tooth loss. Conventional tissue engineering approaches have been developed to regenerate or repair periodontium but, engineered periodontal tissue formation is still challenging because there are still limitations to control spatial compartmentalization for individual tissues and provide optimal 3D constructs for tooth-supporting tissue regeneration and maturation. Here, we present the recently developed strategies to induce osteogenesis and cementogenesis by the fabrication of 3D architectures or the chemical modifications of biopolymeric materials. These techniques in tooth-supporting hard tissue engineering are highly promising to promote the periodontal regeneration and advance the interfacial tissue formation for tissue integrations of PDL fibrous connective tissue bundles (alveolar bone-to-PDL or PDL-to-cementum) for functioning restorations of the periodontal complex.

Establishment of in vitro three-dimensional cementocyte differentiation scaffolds to study orthodontic root resorption

Orthodontic-induced root resorption is a severe side effect that can lead to tooth root shortening and loss. Compressive force induces tissue stress in the cementum that covers the tooth root, which is associated with activation of bone metabolism and cementum resorption. To investigate the role of cementocytes in mechanotransduction and osteoclast differentiation, the present study established an in vitro three-dimensional (3D) model replicating cellular cementum and observed the effects of static compression on the cellular behavior of the cementocytes. Cell Counting Kit-8 assay, alkaline phosphatase staining and dentin matrix protein 1 quantification were used to evaluate the cementocyte differentiation in the 3D scaffolds. Cellular viability under static compression was evaluated using live/dead staining, and expression of mineral metabolism-related genes were analyzed via reverse transcription-quantitative PCR. The results suggested that the cementocytes maintained their phenotype and increased the expression of osteoprotegerin (OPG), receptor activator of NF-κB ligand (RANKL) and sclerostin (SOST) in the 3D model compared with cells cultured in two dimensions. Compression force increased cell death and induced osteoclastic differentiation via the upregulation of SOST and RANKL/OPG ratio, and the downregulation of osteocalcin. The effect of compression showed a force magnitude-dependent pattern. The present study established an in vitro model of cellular cementum to study the biology of cementocytes. The results indicated that cementocytes are sensitive to mechanical loading and may serve potential roles in the metabolic regulation of minerals during orthodontic root resorption. These findings provide a novel tool to study biological processes in the field of orthodontics and expand knowledge of the biological function of cementocytes.

Lithium chloride attenuates suppressed differentiation induced by mechanical strain in cementoblasts

Aim: The purpose of this study was to investigate the influence of mechanical strain on OCCM-30 cementoblast differentiation and Wnt/β-catenin pathway activity. Materials and Methods: Mechanical tension in the form of 2500-µ strain was applied to the cells using the Forcel four-point bending system, with or without the Wnt signaling activator, lithium chloride. Changes in cell differentiation and the expression of Wnt/β-catenin pathway components in response to strain and lithium chloride were assessed by real-time PCR, immunofluorescence, and western blotting. Results: The mRNA expression levels of the cementoblastogenesis-related genes alkaline phosphatase, runt-related transcription factor 2, and collagen 1, were decreased with mechanical strain. Similarly, the Wnt signaling pathway component genes LRP5, AXIN2, and LEF1 were decreased. The immunofluorescence assay demonstrated that scant β-catenin underwent nuclear translocation after the cells were subjected to mechanical strain. Moreover, western blotting showed that the protein levels of both β-catenin and phosphorylated β-catenin were increased after mechanical strain. In the presence of lithium chloride, the differentiation that was suppressed by mechanical strain was attenuated. Conclusions: 2500-µ strain mechanical strain inhibited cementoblast differentiation activity in vitro, which could be alleviated by actviating Wnt/β-catenin signaling using lithium chloride.

PTH1R signalling regulates the mechanotransduction process of cementoblasts under cyclic tensile stress

Objective

To investigate the regulatory role of type I parathyroid hormone receptor (PTH1R) signalling in the mechanotransduction process of cementoblasts under cyclic tensile stress (CTS).

Materials and methods

Immortalized cementoblast cell line OCCM-30 were employed and subjected to cyclic tensile strain applied by a four-point bending system. The expression of PTHrP and PTH1R, as well as cementoblastic transcription factor Runx-2, Osterix, and extracellular matrix protein COL-1 and OPN were assessed by quantitative real-time polymerase chain reaction and western blot analysis. PTH1R expression was knocked down by siPTH1R transfection, and the alteration of cementoblastic biomarkers expression was examined to evaluate the function of PTH1R. Furthermore, to investigate possible downstream molecules, expression of signal molecule ERK1/2 with or without siPTH1R transfection, and the effect of ERK inhibitor PD98059 on the expression of cementoblastic biomarkers was also examined.

Results

Cyclic tensile strain elevated the expression of PTHrP and PTH1R, as well as cementoblastic biomarkers Runx-2, Osterix, COL-1, and OPN in a time-dependent manner, which was inhibited by siPTH1R transfection. The expression of phosphorylated ERK1/2 was upregulated time-dependently under cyclic stretch, which was also inhibited by siPTH1R transfection, and pretreatment of p-ERK1/2 inhibitor PD98059 undermined the increase of Runx-2, Osterix, COL-1, and OPN prominently.

Conclusion

The findings of the present study indicate that PTH1R signalling plays a regulatory role in the CTS induced cementoblastic differentiation in mature cementoblasts, and ERK1/2 is essentially involved as a downstream intracellular signal molecule in this mechanotransduction process.

Long noncoding RNA expression profile of mouse cementoblasts under compressive force

OBJECTIVES

To investigate the long noncoding RNA (lncRNA) expression profile of cementoblasts under compressive force.

MATERIALS AND METHODS

Mouse cementoblasts were exposed to compression (1.5 g/cm²) for 8 hours. RNA sequencing (RNA-seq) was performed to compare the transcriptomes of the compressed and control cells. Quantitative real-time polymerase chain reaction (qRT-PCR) was used to validate five of the differentially expressed lncRNAs of interest. Gene Ontology (GO) functional annotation and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analyses were also performed.

RESULTS

A total of 70 lncRNAs and 521 mRNAs were differentially regulated in cementoblasts subjected to compressive loading. Among the differentially expressed lncRNAs, 57 were upregulated and 13 downregulated. The expression levels of the five selected lncRNAs (Prkcz2, Hklos, Trp53cor1, Gdap10, and Ak312-ps) were validated by qRT-PCR and consistent with the RNA-seq results. GO functional annotation demonstrated upregulation of genes associated with cellular response to hypoxia and apoptotic processes during compressive loading. KEGG analysis identified the crucial pathways involving the hypoxia-inducing factor-1α, forkhead box O, and mammalian target of rapamycin signaling pathways.

CONCLUSIONS

Mechanical compression changes the lncRNA expression profile of cementoblasts, providing important references for further investigation into the role and regulation of lncRNAs in compressed cementoblasts and root resorption during orthodontic treatment.

Long noncoding RNA NNT-AS1 promotes hepatocellular carcinoma progression and metastasis through miR-363/CDK6 axis

Long non-coding RNAs (lncRNAs) have been tested to act as important regulator in liver cancer genesis and progression. LncRNA Nicotinamide Nucleotide Transhydrogenase-antisense RNA1 (NNT-AS1) has been reported to participate in the tumorigenesis. However, the exact molecular mechanism of NNT-AS1 in hepatocellular carcinoma (HCC) is still unknown. In present study, our team identified the up-regulated expression of NNT-AS1 in HCC tissue and cell lines compared with adjacent noncancerous tissue and normal cells. Moreover, HCC patients with high NNT-AS1 levels had poor prognosis than that with low NNT-AS1 level (p=0.0089). In vitro, gain- and loss-of-function experiments revealed that enhanced NNT-AS1 expression promoted the proliferation ability and alleviated the cycle arrest and apoptosis, while NNT-AS1 knockdown suppressed the proliferation and induced G0/G1 phase arrest and apoptosis. In vivo, NNT-AS1 knockdown inhibited the HCC neoplastic tumor volume and weight. Bioinformatics analysis and luciferase reporter assay validated that miR-363 targeted NNT-AS1 and CDK6 3’-UTR. MiR-363 was down-regulated in HCC tissue and cells. NNT-AS1 competed with CDK6 for miR-363 binding and could increase CDK6 expression. In summary, our results suggest the oncogenic role of NNT-AS1 in HCC tumorigenesis through miR-363/CDK6 axis, providing a novel therapeutic target for human HCC.

Mechanosensitive miRNAs and Bone Formation

Mechanical stimuli are required for the maintenance of skeletal integrity and bone mass. An increasing amount of evidence indicates that multiple regulators (e.g., hormone, cytoskeleton proteins and signaling pathways) are involved in the mechanical stimuli modulating the activities of osteogenic cells and the process of bone formation. Significantly, recent studies have showed that several microRNAs (miRNAs) were sensitive to various mechanical stimuli and played a crucial role in osteogenic differentiation and bone formation. However, the functional roles and further mechanisms of mechanosensitive miRNAs in bone formation are not yet completely understood. This review highlights the roles of mechanosensitive miRNAs in osteogenic differentiation and bone formation and underlines their potential therapeutic application for bone loss induced by the altering of mechanical stimuli.